On Sun, 9 Apr 2006 15:45:53 -0400, "wayne mak"
wrote:

I have been told (ot done so) that it will work on single phase just derate
the output.


My AirCo transformer MIG will not run on single phase, though Ive not
had the guts to put L2 and L3 together as someone suggested.

Gunner

"john" wrote in message
...
Welders run fine on rotary converters. You have no motor startup current
to contend with as you would with a motor, and unless its one of the
latest ones that's all electornic it will use just about any power you
feed it, in fact you could just hook up a bank of caps to generate the
third phase on the old ones and not even bother with a rotary generator.


John

dave wrote:
moving OUT of my shop and back into my garage at home. shop has three
phase. I want to buy a used MIG, but lots of the ones I see are three
phase. anybody here ever run their MIG (or any other three-phase welder,
for that matter) on a "rotary converter setup"?

would running a welder on a rotary converter setup be 'ill-advised'? I
already have a rotary converter rated "max single motor three hp, max
total hp 12 hp", but it's not clear to me how that relates to using it
with a welder...or if it's even 'doable'?

thanks in advance for educating me on this, guys :-)

toolie

==
ps-replies by e-mail, if any, please remove the weirdstuff from my
address before you click 'send' - thanks
==



"I think this is because of your belief in biological Marxism.
As a genetic communist you feel that noticing behavioural
patterns relating to race would cause a conflict with your belief
in biological Marxism." Big Pete, famous Usenet Racist