Excellent, many thanks. I didn't make it clear I already have the brace. I
hadn't thought of cutting the tip off a screwdriver. That is what I will do,
except I will use a cheapy new one instead of a worn out old one.

Tim W



Yes, make sure you have two inches that will go into the chuck, and then the
length you need that comes out from the chuck. A full 5" total length is good.
And when mounted, that chuck must be as tight as possible without being
impossible to loosen.

--
Alex - "newbie_neander" woodworker
cravdraa_at-yahoo_dot-com
not my site: http://www.e-sword.net/