has anyone converted a cross slide screw to metric.
On Tue, 14 Mar 2006 09:06:15 -0500, "J. Clarke"
wrote:
Stealth Pilot wrote:
On Tue, 14 Mar 2006 10:36:58 GMT, Gunner
wrote:
The metric cross slide screw is 11mm x 2mm Acme, LH. You could try Hercus
(now Axmel) in S.A. for the parts, or perhaps Mick Moyle's Engineering in
Summer Hill NSW could help. They had Hercus metric lead-screws and nuts
last time I was in there.
Metric? Thats that Frog measurement aint it?
Gunner, running for cover......
no, in my case it is american measurement :-)
the americans have been metric now for 103 years and still we have
aviation in number bolts and unf, unc, and AN.
a number sequence that goes 5/64, 3/32,7/64,1/8 is utterly mind
numbing to me.
I prefer 1.95, 2.35,2.75,3.10 which makes perfect sense to me.
I've never seen a machine tool marked in 64ths. Always in
decimal--.1, .01, .001, etc. Sometimes it might go .002 or .005 or .05 or
whatever depending on the precision of the control.
Indeed.
Binary fractions (1/2, 1/4, 1/8, etc) are more typical of architectural
design than mechanical engineering.
Or carpentry.
I prefer to work in metric. my treasured german imperial vernier is
marked in 128ths of an inch which I also find easier.
its just me
Stealth Pilot.
"A prudent man foresees the difficulties ahead and prepares for them;
the simpleton goes blindly on and suffers the consequences."
- Proverbs 22:3
|