Concur! This is 99% surely a PIP issue. Bypass that beast!

--
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)

========================

"Leonard Caillouet" wrote in message
news:eZXNf.77236$bF.63559@dukeread07...
This symptom is typical of the infamous PIP module with the leaky
electrolytics. If the corrosion has not become so bad that the board is
unrepairable, you can change all of the surface mount caps and clean up
the corrosion. If the traces are eaten up or the black corrosion has
reached the IC, don't bother. Just bypass it.

The details of the bypass and repairs of the PIP modules can be found in
the archives of this group and on the NESDA-Ohio organization site.

There have also been some sets in this chassis series with problems on the
9 and 12 volt lines. Check the caps on those lines.

Leonard

wrote in message
oups.com...
This is the description I got from the customer over the phone. It
sounds like it could be a high ESR cap but I don't know. Does anyone
know of a definite cause for this symptom on this model? I would like
to try to have as much information on this before I attempt an in home
repair. Thanks for any advice. Lenny Stein, Barlen Electronics.