"NC" wrote in message
...
All,
I am thinking of laying quick-step laminate tiles in the athroom. However,
anyone got any tips for how to do it round the bottom of the toilet and
sink
?? Cutting to size and leaving a 10mm gap isn't a wory - but what do I
fill/cover the gaps with ??

Cheers,
Neil


I left a 5mm gap as per the instructions on the particular laminate I used,
and then used coloured silicone sealant to fill/seal the gap.

Even if you manage to find some other means of covering the gap I'd say that
sealing it was essential, due to the high probablility of water penetration
during cleaning.

As an aside, although manufacturers specify a specific, fixed, expansion gap
around the room, this must _surely_ depend upon the dimensions of the room
where the flooring is laid? Therefore, if it's a small bathroom I would
have thought that you could probably get away with a much smaller gap than
the normal recommended one. Conversely, for a particularly large room I
would have thought that a larger gap would be needed.

cheers
Richard
--
Richard Sampson

email me at
richard at olifant d-ot co do-t uk