DoN. Nichols wrote:
According to Mike Henry :
"Brent Philion" wrote in message
m...
[ ... toolpost grinder discussion ... ]
http://www.metalworking.com/dropbox/Lathe_01.JPG
below the chuck key
The link seems to be dead...
That's because it was submitted with an image name which would
clash with other images already there, or to be expected to come in.
So, Steve (the one who runs the Dropbox) renamed it to:
toolpost_grinder_and_Lathe_01.JPG
along with:
toolpost_grinder_and_lathe.txt
Normal practice is to put your initials, or something else at the front
of the names so the descriptive ".txt" file and the image or images will
sort to show up together.
Enjoy,
DoN.
AHA thanks don i've been "Edumacated"
http://www.metalworking.com/dropbox/...d_Lathe_01.JPG
the toolpost grinder is on the lowershelf beloe the chuck key its a
motor ina tube feeding out to 2 step pulleys
back down toa drill rod in a tube feeding out to a bit of thread that
the grinding burr goes onto
the grinding burr obviously sticking outtowards the front
the dropbox is a really neat idea and Kudos to the person wh came up
with it if its steve, thanks steve