On Tue, 2 Sep 2003 22:45:35 -0400, "david" wrote:

Thanks to everyone for the help. Sounds like I'd better get a manual and
see what the connection looks like so I can get the spindle off and locate a
replacement spider.

Regards,
David

You pull the motor, not the spindle G

Gunner



"Mike Henry" wrote in message
...

"david" wrote in message
...
I had the chance to get a used (very used) surface grinder and I took
it.
I've never used one before so I read some of the previous threads but
still
have some questions.

First, if anyone has a manual I'm willing to pay for a copy.

Main problem is this: If I hold spindle at the threads, I can rotate it
about 30 degrees before it catches the motor shaft. I can twist it
back
and forth and feel it bang as it engages with the shaft. I assume
there's
a
key in there but I don't know how to remove the spindle from the shaft.
(I
hope I'm using the right names for these parts).

snip

I'm not familiar with that grinder but had an identical problem with an
old
Enco T&C grinder. As Ned and Gunner have surmised the problem was a
disintegrated spider coupling and AIR, Lovejoy made a replacement. I do
recall getting the parts from a local Motion Industries store for $15 or
so.




"War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling
which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight,
nothing which is more important than his own personal safety, is a miserable creature and has no chance of being
free unless made and kept so by the exertions of better men than himself."
- John Stewart Mill