I have some Hydraulic manifolds w/solenoid valve/valves. Is there any
interest in them? They are made of aluminum and appear to be new except one
which looks so good you would think it as new. They are all clean and either
have caps in the ports or are wrapped in plastic bags with oil inside the
bag.

Some names and numbers a

HPS 0783A M13485 has 3 Hydraforce solenoid valves # 63510122802on it. 12 VDC

HPS 07838B, M14611, ASSY D7839B, 101303 with t cartridges with RV08-22H,
0339 on the cartridge. With 3 HYDRAFORCE 12 VDC 4301612 2503 solenoids on
it. May have been used for a test.

02592190 HYDAC USA 02580997 MANSOL M30-1368 with one HYDAC 12VDC solenoid
valve and some sort of cartridge valve on/in it.

02592152-B HYDAC USA 02580975-A, NDS 37/02. It has 3 HEYDAY 12 VDC solenoid
valves and 2 of some sort of cartridge valves in it.

02592190-A HYDAC USA 02580997-A NDS 37/02 with 1 solenoid valve and 1 sort
of cartridge valve.

02592152 HYDAC USA 02580975, ND. has 3 solenoids and 2 of some sort of
cartridges

I have one block that has Compact Controls 320509 12VDC solenoid valve and a
cartridge in it. Has 4 ports with CAPPLUG RP0-110 and 1 small port may be
for a gauge with a RP0-104 in it.

I have one block that has 4 ports with no name on it, but appears to have a
spool inside it. It has 2 solenoids back to back on one end mounted like it
would move a spool one direction by energizing one solenoid and the other
solenoid would move it back to where it was. The solenoid has the name
STERLING HYDRAULICS 24 VDC 14W, CCS 024 S. PAT. 5002253

Any interest in these or I will scrap them out.

Richard W.