On Wed, 04 Jan 2006 02:26:29 -0800, meow2222 wrote:

Andrew Gabriel wrote:
In article ,
lid (pcyljmb) writes:
Hi,

I was wondering whether any one could shed any light on a most
peculiar problem we seem to have encountered with our Electra AWM900
Washing Machine. Unlike Adrian our motor and other related functions
still seem to be operating OK : however we returned from a few days
away late last night to find that the newly laid carpets were soaked
through.

The washing machine drum was half full of water (having been
completely empty and turned off before we went away), but because the
washing machine door was ajar to prevent it smelling, water had come
out and saturated the nearby carpets.

Either one of the inlet valves has failed to close completely
(maybe a piece of sand stuck in it), or it is syphoning waste
water back in from the drain.

the latter would smell bad, so its easy to tell. Replace the water
inlet valves. (A valve cleanout may be all thats needed, but may be
isnt good enough.)

W/m inlet valve don't fail very often but when they do this would be the
effect.



--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html