I've now got this unit running using a simple (two relays and a
capacitor) static inverter - you were half right - the feed motor
reverses to actuate the rapid feed - it doesn't have to do it quickly,
though it's convenient if it does - I have no trouble with it changing
direction instantly, though I'm not sure I uderstand why it works. I
built the static converter using some scrap parts I had lying around
(two 250 UF starting caps, a small starting relay and a 110AC single
pole relay)

now to find all the oil ports and fill it with oil.


On Wed, 21 Dec 2005 09:18:49 -0600, Wayne Cook
wrote:

On Wed, 21 Dec 2005 06:11:20 +0000, "William B Noble (don't reply to
this address)" wrote:

this Abene mill finally arrived - a long story. The good news is that
it's wired for 220, so I won't need to worry about a transformer or
other means to convert to 440 - everything seems to be dual voltage.
My plan, unless someone here has a much better idea is to use two
VFDs, one for the spindle motor, one for the ways motor, and to use a
suitably sized capacitor for the coolant pump - a little motor that
doesn't seem worth a VFD of its own. I like the VFD approach because
of the soft start. If anyone has a better suggestion, chime in.... I
don't really want to use a rotary converter because of space
considerations

The only possible problem could be the feed motor. To engage rapid
traverse the feed motor is reversed quickly (as in instantly). The VFD
might not change it quick enough to make the rapids engage (you'll
have to try it to see). I know that my mill is rather difficult to get
the rapids to engage when it's cold with the instant reverse and it
may take several tries before it does engage.


Wayne Cook
Shamrock, TX
http://members.dslextreme.com/users/waynecook/index.htm
Bill

www.wbnoble.com

to contact me, do not reply to this message,
instead correct this address and use it

will iam_ b_ No ble at msn daught com