View Single Post
  #35   Report Post  
Posted to alt.home.repair
Mark Lloyd
 
Posts: n/a
Default Furnace losing 24v when heat requested

On Mon, 19 Dec 2005 17:57:42 -0600, RP
wrote:



Ralph Mowery wrote:
"Travis Evans" wrote in message
news:BmHpf.437$Cw5.54@fed1read05...

On Monday 19 December 2005 12:43, Mark Lloyd wrote:


BTW, considering strange electrical stuff, what if you had an old
(Edison base) fuse box that you could screw a light bulb into instead
of a fuse?

When I was young (not too long ago) I read in some sort of "home
emergencies" type of book something to the effect that you could screw
in a light bulb in the fuse box to locate or diagnose a short. The
bulb would glow brightly when there was too much current going through
it.

I'm guessing that if you screwed in a light bulb in a fuse box, the
brightness or dimness of the glow would depend on how much current was
being drawn on that circuit.



That is true. While I don't recommend it to people that are not use to
working with electricity, a trouble shooting practice is to subistute a lamp
with for the fuse or breaker. If the circuit is suspose to be open the
light will not burn. If you put in a 100 watt bulb in a 120 volt circuit
and it lights up to full brightness then you have a short circuit or some
device in the circuit that is drawing current. If you are sure there is
nothing in the circuit you look around and disconnect things tuil the light
goes out. If there could be a high current (more that an amp or two) device
in the circuit, you will have to disconnect it. Anything in the circuit
that uses less than a couple of amps will cause the light to burn dimmer.


Sounds like a good way to burn down a house or to smoke a few small
appliances. For an encore you can slip a penny under the fuse. Dear
readers, please don't try any of this at home!


Are you somehow equating a penny and a light bulb? A light bulb has a
much higher resistance, and (unless it got shorted somehow) could
never (on 120V) pass a current higher than 833mA (for a 100W bulb). It
wouldn't even conduct that much unless it was into a shorted circuit.

I used to work at Goodwill (for awhile), and they actually used light
bulbs in series for testing appliances.

hvacrmedic

--
5 days until the winter solstice celebration

Mark Lloyd
http://notstupid.laughingsquid.com

"Democracy is two wolves and a lamb voting on what
to have for lunch. Liberty is a well armed lamb
contesting the vote." - Benjamin Franklin