View Single Post
  #5   Report Post  
Roger Shoaf
 
Posts: n/a
Default WTD plans for a PIG Roaster

Gary,

Is "coon ass" a type of pig or is it like a miniature horse or something?

--
Roger Shoaf
If you are not part of the solution, you are not dissolved in the solvent.


"Gary Brady" wrote in message
...
Looking for simple plans for pig roaster, out of steel drum or whatever.

With
or without turning gear. Any plans or picutres. some simple plans for a

80lb
pig or under under.

COON-ASS MICROWAVE OVEN

Build a flat box with open top out of 3/4" plywood to fit your pig. Line

it
with aluminum foil. Build the top of the box out of steel, using angle

iron
with the horizontal leg facing out to bear on the upper edge of the box
opening. Weld another set of angles with the horizontal leg facing in at

the
bottom of the vertical legs. Fill the remaining void with heavy

sheetmetal,
about 16 ga or so. Place your pig inside, fill the cavity with charcoal,

light
it and you have a Coon-Ass Microwave Oven. Quite common in Louisiana.

I've
seen one these cook a 30lb pig in 3 1/2 hours. Might need to scale it up

to
fit your pig. Doesn't provide the visual effect of a rotating spit

roasted
pig, nor is it conducive to the whiskey drinking that usually goes along

with
such, but its quick and clean and you don't have to worry about dropping

the
pig into the fire.




Gary Brady
Austin, TX