On Sun, 4 Dec 2005 18:01:55 -0000, "Doctor Drivel"
wrote:


"Andy Hall" wrote in message
.. .
On Sun, 4 Dec 2005 16:46:39 -0000, "Doctor Drivel"
wrote:


"NikV" wrote in message
...
Hi
I've got to gain space in our small bedroom so I want to put the hot
water
tank in the loft, how high above the top of the hot water tank should
the
water surface of the cold water tank be. Has anybody got any links to
sites
with cold water tanks which will fit high up in the ridge - I've
googled
but
can't find anything.
Any advice welcome - ps can't afford to change from the current open
vented
system ATM

Have the kitchen tap off the mains. For the
hot and cold water for the rest of the house
use one of these, as it fits nicely in the loft.
http://www.rcmgroup.co.uk/specialize...ower/index.htm
You can take the shower off it The cold
taps can be taken off it and the
hot taps too giving good mixing at the
basins and bath. It is heated from a
normal system boiler.

Are you certain about that?

Yep.



There are no mention of boiler connections and none are shown....

An indirect version can be specified, with either Part L or quick recovery
coil.

Not mentioned on their web site that I could see. Do you have a
reference for that and the price?


This one obviously is though...

http://www.rcmgroup.co.uk/specialize...mpak/index.htm

Far more bulky than a cylinder 6 les than foot high.


That is rather overstating it.

The combi/shower is 1900mm high vs. the 2050mm of the formpak

The footprint is larger at 800x600 than the 500mm of the combi/shower,
but it would be surprising if that were an issue in an attic able to
accommodate the height since way more than this floor area would be
implied.

All of which is somewhat academic since the question really suggested
a coffin tank as the solution, since this will have the least cost.




--

..andy