Toller wrote:
I have finished my basement, but have to put in the plug myself. Don't
feel like getting a permit just for one outlet.


You realize that basement outlets have to be GFCI protected, and they have
to be space every 6' (or something like that, I would have to look it up).
The town will not care about the outlet, but they will get ****ed if they
find out about finishing the basement without a permit.


Interesting. The sump outlet is not protected, but the one under the
fuse panel is. Those are the two the house builder installed.

Anyway, I have a gfci breaker and will probably just use that as the
whole basement wiring for outlets has not been connected in the panel yet.


So I have to install a double wallbox for 4 outlets. since my stereo will
use at least that many and I dont want those plug extenders to much.

The question is, since this is in a small closet that was created for this
purpose, and the closet is not really big enough to enter or use, do I
have to put the wiring inside of a pipe, or can I leave it exposed?

Its in a corner, where the back walls are cement, and the front walls are
drywall with metal framing. There is a standard door, and a big glass
door for stereo access. I am going to put a light switch on the drywall
already for a light that is just outside the closet in the ceiling. So
the wiring is already exposed by the light switch. Just wondering if the
outlet box I screw into the wall can have wiring going do it like the
light switch, or if I should put it into a pipe somehow!?

Of course without the pipe I am not sure how to screw the wiring in place
against the cement wall...

The wiring is 12Ga/20A (yellow).


The spirit of the code is that the wiring has to be protected from any
possible damage. So if absolutely nothing can knock into it or snag it,
then it probably is not a problem; even if it techically doesn't meet code.
It would be best if you could bring it straight down the corner, since it is
reasonably protected there. In general running wire in the corner between
the wall and ceiling is considered safe, so the idea would be the same.

Why can't you bring it down the sidewall though?

well the light is in the ceiling and the wire is coming from that
direction. However, the power comes in from the wall, and so its from
the side at outlet level. I will have to run the line to the wall quad
outlet, then run a line to the light switch, then from the switch to the
light.




--
Respectfully,


CL Gilbert

"Verily, verily, I say unto you, He that entereth not by the door() into
the sheepfold{}, but climbeth up some other *way, the same is a thief
and a robber."

GnuPG Key Fingerprint:
82A6 8893 C2A1 F64E A9AD 19AE 55B2 4CD7 80D2 0A2D