Matthew Long wrote:

My very reliable 28 inch Nicam Hitachi TV suddenly gave up last Thursday,
after 13 years without a problem. Well, it had one problem very common with
this model - C46TN permanently displayed. (This is how I know the model
number!) but after looking at Google, managed to press the right buttons to
remove it!

So, apart from that, it's been fine! Now when you switch it on, you get
sound, but no pictures. The screen stays black, apart from two white dashes
in the centre left of the screen for a few seconds. I think this is the
channel number being displayed (Although of course you can't read it!

If you press the Menu button, you used to get four coloured menu options.
Now when you press menu, you get four coloured horizontal lines across the
centre of the screen. It looks like the coloured menu logos have been
squashed into a single line.

I've since bought a new TV, but before I throw my old telly out, is it
possibly worth fixing? Anyone know what might possibly be wrong from the
symptoms I've described? Is it the tube? Dry solder joint?

The TV is in perfect condition, with not a single mark on it. It just seems
a shame to chuck it, although I realise that it's probably not worth
anything to anyone now.

Cheers,

Matthew Long



If the picture tube was ood before this problem occured - that is you
like the picture quality - then it is very much worth repair.
Sounds like you lost vertical deflection. Could be dry/cracked solder
joints, a few bad capacitors, a bad vertical output IC, a bad resistor
or diode, or some combination of these.

If you have a competent technician repair it, it should not be too
expensive.
If you are capable of this type of repair yourself, troubleshoot the
vertical section, and you should be watching TV really soon!
Good Luck.