DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   I'm gloating (https://www.diybanter.com/woodworking/93965-im-gloating.html)

Nicky March 7th 05 01:14 AM

I'm gloating
 
I took last Friday off, to make a wood run (3 hr drive). I needed 100 bd ft
red oak, some ply etc...

While there, and talking with owner, he tells me of an order that was just
canceled by a contactor (who just went under), and if interested, he'd make
me a deal. Strapped on a large pallet and ready to go, he said about 580 bd
ft, mostly 4/4 and some other stuff (his words) of ash, $500 for the whole
lot, half of what he was going to charge cause ash did not sell well for
him.

Today, I planed (and planed and planed), and stacked (with stickers) the
lot, and the stuff is gorgous. My gloat, not so much for the cost, but at
the bottom of the stack, 6 16/4 x ~13" x 9' boards, very flat and straight
grained. Hello new work benches!

My honey thinks I've lost my mind.




Will March 7th 05 01:28 AM

I'm not even going to be rude you. Just post your address.


Nicky wrote:
I took last Friday off, to make a wood run (3 hr drive). I needed 100 bd ft
red oak, some ply etc...

While there, and talking with owner, he tells me of an order that was just
canceled by a contactor (who just went under), and if interested, he'd make
me a deal. Strapped on a large pallet and ready to go, he said about 580 bd
ft, mostly 4/4 and some other stuff (his words) of ash, $500 for the whole
lot, half of what he was going to charge cause ash did not sell well for
him.

Today, I planed (and planed and planed), and stacked (with stickers) the
lot, and the stuff is gorgous. My gloat, not so much for the cost, but at
the bottom of the stack, 6 16/4 x ~13" x 9' boards, very flat and straight
grained. Hello new work benches!

My honey thinks I've lost my mind.




--
Will
Occasional Techno-geek

Steve March 7th 05 01:55 AM

That stuff is bad for your health! Tell me where you are, and I'll come
get it and take it away so you aren't exposed to its deadly toxins a
moment longer than necessary. Your honey will thank me. :-)

--Steve

Nicky wrote:
I took last Friday off, to make a wood run (3 hr drive). I needed 100 bd ft
red oak, some ply etc...

While there, and talking with owner, he tells me of an order that was just
canceled by a contactor (who just went under), and if interested, he'd make
me a deal. Strapped on a large pallet and ready to go, he said about 580 bd
ft, mostly 4/4 and some other stuff (his words) of ash, $500 for the whole
lot, half of what he was going to charge cause ash did not sell well for
him.

Today, I planed (and planed and planed), and stacked (with stickers) the
lot, and the stuff is gorgous. My gloat, not so much for the cost, but at
the bottom of the stack, 6 16/4 x ~13" x 9' boards, very flat and straight
grained. Hello new work benches!

My honey thinks I've lost my mind.




Edwin Pawlowski March 7th 05 03:23 AM


"Nicky" wrote in message

mostly 4/4 and some other stuff (his words) of ash, $500 for the whole
lot, half of what he was going to charge cause ash did not sell well for
him.


Yep, that's a gloat.


My honey thinks I've lost my mind.


Probably, but what does it have to do with woodworking? ;)



[email protected] March 7th 05 03:25 AM


Nicky wrote:
Snip

Today, I planed (and planed and planed), and stacked (with stickers)

the
lot, and the stuff is gorgous. My gloat, not so much for the cost,

but at
the bottom of the stack, 6 16/4 x ~13" x 9' boards, very flat and

straight
grained. Hello new work benches!

My honey thinks I've lost my mind.


Given that you've *posted* the gloat, I think you know where this
conversation is going.

-Phil Crow


Patriarch March 7th 05 04:07 AM

"Edwin Pawlowski" wrote in news:qOPWd.6795$DW.4461
@newssvr17.news.prodigy.com:

snip

My honey thinks I've lost my mind.


Probably, but what does it have to do with woodworking? ;)


There's a long running discussion at my house as to whether that's a cause
or a symptom.

;-)

If I brought home 500+ bf of anything right now, I'd have to rent somewhere
to put it, or give it away.

Yes, it's gloatworthy.

Patriarch

charlie b March 7th 05 05:23 AM

Since no one's said it yet
You Suck!

charlie b

Nate Perkins March 7th 05 05:49 AM

"Nicky" wrote in
:

....
While there, and talking with owner, he tells me of an order that was
just canceled by a contactor (who just went under), and if interested,
he'd make me a deal. Strapped on a large pallet and ready to go, he
said about 580 bd ft, mostly 4/4 and some other stuff (his words) of
ash, $500 for the whole lot, half of what he was going to charge cause
ash did not sell well for him.

....

Nice one!

My honey thinks I've lost my mind.


Right. Don't they all?


Rob Stokes March 7th 05 06:31 AM

cool!

Rob

--


http://www.robswoodworking.com

"Nicky" wrote in message
...
I took last Friday off, to make a wood run (3 hr drive). I needed 100 bd

ft
red oak, some ply etc...

While there, and talking with owner, he tells me of an order that was just
canceled by a contactor (who just went under), and if interested, he'd

make
me a deal. Strapped on a large pallet and ready to go, he said about 580

bd
ft, mostly 4/4 and some other stuff (his words) of ash, $500 for the whole
lot, half of what he was going to charge cause ash did not sell well for
him.

Today, I planed (and planed and planed), and stacked (with stickers) the
lot, and the stuff is gorgous. My gloat, not so much for the cost, but at
the bottom of the stack, 6 16/4 x ~13" x 9' boards, very flat and

straight
grained. Hello new work benches!

My honey thinks I've lost my mind.






Mortimer Schnerd, RN March 7th 05 11:51 AM

Patriarch wrote:
My honey thinks I've lost my mind.


Probably, but what does it have to do with woodworking? ;)


There's a long running discussion at my house as to whether that's a cause
or a symptom.




My dog told me one has nothing to do with the other. Of course, the last time
he told me to buy a particular type of gun and it turned out to be crap. What
does he know?




--
Mortimer Schnerd, RN

VE



Larry Jaques March 7th 05 02:04 PM

On Sun, 6 Mar 2005 18:14:16 -0700, the inscrutable "Nicky"
spake:

I took last Friday off, to make a wood run (3 hr drive). I needed 100 bd ft
red oak, some ply etc...

While there, and talking with owner, he tells me of an order that was just
canceled by a contactor (who just went under), and if interested, he'd make
me a deal. Strapped on a large pallet and ready to go, he said about 580 bd
ft, mostly 4/4 and some other stuff (his words) of ash, $500 for the whole
lot, half of what he was going to charge cause ash did not sell well for
him.

Today, I planed (and planed and planed), and stacked (with stickers) the
lot, and the stuff is gorgous. My gloat, not so much for the cost, but at
the bottom of the stack, 6 16/4 x ~13" x 9' boards, very flat and straight
grained. Hello new work benches!

My honey thinks I've lost my mind.


We all think YOU SUCK! Congrats on a great gloaty deal.

P.S: The first project should be something for SWMBO.
(I'm a bachelor and even _I_ know that much. ;)


================================================== ========
I drank WHAT? + http://www.diversify.com
--Socrates + Web Application Programming

Nicky March 9th 05 02:15 AM


"Larry Jaques" wrote in message
...
On Sun, 6 Mar 2005 18:14:16 -0700, the inscrutable "Nicky"
spake:

I took last Friday off, to make a wood run (3 hr drive). I needed 100 bd

ft
red oak, some ply etc...

While there, and talking with owner, he tells me of an order that was

just
canceled by a contactor (who just went under), and if interested, he'd

make
me a deal. Strapped on a large pallet and ready to go, he said about 580

bd
ft, mostly 4/4 and some other stuff (his words) of ash, $500 for the

whole
lot, half of what he was going to charge cause ash did not sell well for
him.

Today, I planed (and planed and planed), and stacked (with stickers) the
lot, and the stuff is gorgous. My gloat, not so much for the cost, but at
the bottom of the stack, 6 16/4 x ~13" x 9' boards, very flat and

straight
grained. Hello new work benches!

My honey thinks I've lost my mind.


We all think YOU SUCK! Congrats on a great gloaty deal.

P.S: The first project should be something for SWMBO.
(I'm a bachelor and even _I_ know that much. ;)


================================================== ========
I drank WHAT? + http://www.diversify.com
--Socrates + Web Application Programming


The orginal trip was for a honey-do project, some new chairs for the new
kitchen we just finished.
The 16/4 stuff is just for me. Gonna make two new work benches, can't wait.
Vise shopping is fun!






All times are GMT +1. The time now is 09:08 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter