Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Chisels broke
I bought four sets of chisels from a used place. The kind with a light green
see-thru handle and a black trim - no brand. It performed fine for a few weeks until a pearl sized chip came off in sections from the tip of the green handle which I did not notice earlier. I was chiseling against the grain of the wood, not along the grain as instructed from a book. But, I've chiseled against the grain with a 10-year old Stanley (with a non-see-thru plastic handle) without problems. The problem is that a few of the green see-thru chisels have 10-15 percent chips gone from its plastic striking surface. Since that day I am more careful. I'm not sure whether the cause is the a 12-oz. iron hammer or the way I pound them. What's the best way to repair these tool? Thanks |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Chisels broke | Metalworking | |||
FAQ: HAND TOOLS (Repost) | Woodworking | |||
MHG Chisels & Hartville Tool | Woodworking | |||
Angle for skew chisels | Woodworking | |||
Problems sharpening chisels | UK diy |