Good thin-kerf blades
What's the best brand of thin kerf 12" blades for a 12" DeWalt sliding com-
pound miter saw? It seems like the saw is a bit underpowered and I don't want to use the thicker blades, and the cheap thin blades cut like they're dull from the git go. Maybe you have to live with a blade that has less teeth? I've been using the 60-80 tooth ones. |
bub209 asks:
What's the best brand of thin kerf 12" blades for a 12" DeWalt sliding com- pound miter saw? It seems like the saw is a bit underpowered and I don't want to use the thicker blades, and the cheap thin blades cut like they're dull from the git go. Maybe you have to live with a blade that has less teeth? I've been using the 60-80 tooth ones. You're running the same amperage in the DeWalt I'm running in my Bosch, IIRC (15). I don't understand why you're having a problem with power. You're not making a long cut, depth is seldom more than 3", and 15 amps should be more than sufficient to drive a 12" 80 tooth (what I'm currently running). Regardless of blade quality, ANY 12" thin kerf blade is more likely to deflect and screw up your cut than is a full kerf type. Charlie Self "I think we agree, the past is over." George W. Bush |
"BUB 209" wrote in message ... What's the best brand of thin kerf 12" blades for a 12" DeWalt sliding com- pound miter saw? It seems like the saw is a bit underpowered and I don't want to use the thicker blades, and the cheap thin blades cut like they're dull from the git go. Maybe you have to live with a blade that has less teeth? I've been using the 60-80 tooth ones. Perhaps the best brand is Forrest. But do you want to give up accuracy for speed? Thin kerf blades will flex. If it were me I would stick with the regular kerf and probably a Forrest and feed slower. That said however you might find that a premium regular kerf blade like the Forrest may very cut faster than an average thin kerf blade. As a side note, I once had a Craftsman 1 hp TS. I used thin kerf exclusively but was never really happy with the wavy cuts. My local sharpener talked me in to a regular kerf Systematic blade. I never went back to a thin kerf blade. |
I put the Forrest on mine and it cuts like a buzz saw. Forrest blades are
great. max What's the best brand of thin kerf 12" blades for a 12" DeWalt sliding com- pound miter saw? It seems like the saw is a bit underpowered and I don't want to use the thicker blades, and the cheap thin blades cut like they're dull from the git go. Maybe you have to live with a blade that has less teeth? I've been using the 60-80 tooth ones. |
On Mon, 07 Feb 2005 16:04:53 GMT, max wrote:
I put the Forrest on mine and it cuts like a buzz saw. Forrest blades are great. yep thin kerf sucks. hell in a 12" chopsaw I would use a 12" 1/8" thick blade and a stiffener myself. forrest makes a huge difference. -- Knight-Toolworks & Custom Planes Custom made wooden planes at reasonable prices See http://www.knight-toolworks.com For prices and ordering instructions. |
You might be asking too much of the saw. Just be a little more gentle.
I can stall the biggest saw if I'm too aggressive with the pull. Best thin kerf I've used on the TS is a CMT but never tried ot on the cuttoff. |
"BUB 209" wrote in message ... What's the best brand of thin kerf 12" blades for a 12" DeWalt sliding com- pound miter saw? It seems like the saw is a bit underpowered and I don't Echo what others have said - when you need to nibble or clean up a cut, you'll curse the thin kerfs. Until they make a "thick kerf:" blade, I'll stay with my full kerf 60T DeWalt running a negative hook angle. |
|
All times are GMT +1. The time now is 05:32 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter