DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   Stair Tread finish ? (https://www.diybanter.com/woodworking/85878-stair-tread-finish.html)

Jim Warman January 12th 05 08:17 AM

A lot depends on where the stairs are in the house and your usual footwear
in that area of the house.

Being Canadian (and as close to a red-neck as Canadians get). I wear
socks..... Brits, OTOH, wear slippers - usually some variation on rubber
compounds for soles...... watching TV, I see Yanks wear their grubby old
street shoes in the house.

Upsides... I change my socks every day and wind up polishing the things I
walk on. The Brits don't do much good for their floors, but at least their
socks last longer. Yanks.... well, if you're lucky, that dog turd will at
least fall off under the coffee table....

It's mostly a joke, fercrisesakes.... but I still stand by the footwear
part. Usage defines finish...


"Puff Griffis" wrote in message
...
Ok I did a DAGS and did not find the answer. What is the best finish to use
on stair treads ? My wife loves the look of oil but I am not sure that would
hold up. Any suggestions would be helpful.
Puff




Puff Griffis January 12th 05 08:21 AM

Stair Tread finish ?
 
Ok I did a DAGS and did not find the answer. What is the best finish to =
use on stair treads ? My wife loves the look of oil but I am not sure =
that would hold up. Any suggestions would be helpful.
Puff



JGS January 12th 05 11:58 AM

Hi Puff,
I would consider the #285 on the following url and in Low Sheen which to some looks like an oil / wax finish. If you call or email Homestead they will share their opinion. Cheers, JG
http://www.homesteadfinishing.com/ht...hrfinishes.htm


Puff Griffis wrote:

Ok I did a DAGS and did not find the answer. What is the best finish to use on stair treads ? My wife loves the look of oil but I am not sure that would hold up. Any suggestions would be helpful.
Puff



Swingman January 12th 05 01:14 PM

"Jim Warman" wrote in message

Being Canadian (and as close to a red-neck as Canadians get). I wear
socks..... Brits, OTOH, wear slippers - usually some variation on rubber
compounds for soles...... watching TV, I see Yanks wear their grubby old
street shoes in the house.


And being Canadian of couse, you believe everything you see on TV?

Upsides... I change my socks every day and wind up polishing the things I
walk on. The Brits don't do much good for their floors, but at least their
socks last longer. Yanks.... well, if you're lucky, that dog turd will at
least fall off under the coffee table....


Youd do better to change your underwear, that "dog turd" you're imagining
under the coffee table is obviously coming up your collar.

It's mostly a joke, fercrisesakes.... but I still stand by the footwear
part.


**** you, asshole.

.... hey, it's mostly a joke, fercrisesakes.

--
www.e-woodshop.net
Last update: 11/06/04



Swingman January 12th 05 01:19 PM

"Puff Griffis" wrote in message
Ok I did a DAGS and did not find the answer.
What is the best finish to use on stair treads ?
My wife loves the look of oil but I am not sure that would hold up.
Any suggestions would be helpful.
Puff


Match the finish of your wood floors. Usually a polyurethane. Just don't wax
stair treads unless you're looking for a lawsuit.

--
www.e-woodshop.net
Last update: 11/06/04



firstjois January 12th 05 03:00 PM

Puff Griffis wrote:
Ok I did a DAGS and did not find the answer. What is the best finish
to use on stair treads ? My wife loves the look of oil but I am not
sure that would hold up. Any suggestions would be helpful.
Puff


Is there any kind of special finish for stairs that would keep them from
being too slippery? Newly finished polyurethan floors are slippery to
stocking feet and some kinds of slippers and shoes, stairs must be murder.

Josie



George January 12th 05 03:34 PM

"firstjois" wrote in message
...
Puff Griffis wrote:
Ok I did a DAGS and did not find the answer. What is the best finish
to use on stair treads ? My wife loves the look of oil but I am not
sure that would hold up. Any suggestions would be helpful.
Puff


Is there any kind of special finish for stairs that would keep them from
being too slippery? Newly finished polyurethan floors are slippery to
stocking feet and some kinds of slippers and shoes, stairs must be murder.

Josie



We got my mother a couple sets of "aqua sock" type slip-ons to be used as
slippers. I notice that they're using something with similar embedded
rubber grip on the bottom of socks in nursing homes now, too.

I make the rounds annually to seniors groups to preach against throw rugs,
shiny stairs and slick bathtubs. I don't like picking up people off the
floors or out of tubs who are old enough that a broken hip is almost a death
sentence. I've even had two people whose fall on enamel painted basement
steps killed them when their head impacted a solid object. Too high a price
to pay for stylish stairs.




Swingman January 12th 05 03:56 PM


"firstjois"wrote in message
Puff Griffis wrote:
Ok I did a DAGS and did not find the answer. What is the best finish
to use on stair treads ? My wife loves the look of oil but I am not
sure that would hold up. Any suggestions would be helpful.
Puff


Is there any kind of special finish for stairs that would keep them from
being too slippery? Newly finished polyurethan floors are slippery to
stocking feet and some kinds of slippers and shoes, stairs must be murder.


Polyurethane will eventually lose some of that slippery-to-stocking-feet
quality with use, but I wouldn't rely on it ... and be particularly wary of
the helpful household helper who thinks Endust, or something similar, is
just the thing for those stair treads.

If you really want a stair tread that matches your hardwood floor, and many
folks seem to want to that these days, non-slip footwear is highly
recommended, especially for older folks ... unless, of course, you're a
certain "redneck Canadian", who will hopefully continue to wear his socks.

--
www.e-woodshop.net
Last update: 11/06/04



mp January 12th 05 06:30 PM

Being Canadian (and as close to a red-neck as Canadians get). I wear
socks.....


Red-neck Canadian? Ha! This time of year it's more like blue-neck. Blue
lips. Blue ears. Blue fingers, blue arse, etc..



Dave Jackson January 12th 05 10:15 PM

This Yank wears boots in the house, just in case i have to kick the living
**** out of some Canadian red neck someday.



"Swingman" wrote in message
...
"Jim Warman" wrote in message

Being Canadian (and as close to a red-neck as Canadians get). I wear
socks..... Brits, OTOH, wear slippers - usually some variation on rubber
compounds for soles...... watching TV, I see Yanks wear their grubby old
street shoes in the house.


And being Canadian of couse, you believe everything you see on TV?

Upsides... I change my socks every day and wind up polishing the things I
walk on. The Brits don't do much good for their floors, but at least
their
socks last longer. Yanks.... well, if you're lucky, that dog turd will at
least fall off under the coffee table....


Youd do better to change your underwear, that "dog turd" you're imagining
under the coffee table is obviously coming up your collar.

It's mostly a joke, fercrisesakes.... but I still stand by the footwear
part.


**** you, asshole.

... hey, it's mostly a joke, fercrisesakes.

--
www.e-woodshop.net
Last update: 11/06/04





Puff Griffis January 13th 05 08:01 AM

Thank you all for your responses. It looks like poly win's it's place on =
my stairwell.
Puff

"Puff Griffis" wrote in message =
...
Ok I did a DAGS and did not find the answer. What is the best finish to =
use on stair treads ? My wife loves the look of oil but I am not sure =
that would hold up. Any suggestions would be helpful.
Puff




Hansen January 13th 05 12:39 PM

I just finished replacing my stair tread with Curly Maple and for the finish
I went with Verathayne floor finish (oil based). It is not only better
resistant to water, it is self leveling and I didn't get the "brush" strokes
that occasionally appear. It is a little slick when dry (thats why I -being
a Yank- wear shoes, not socks in the house). The stairs came out nice and
the wife is pleased. They have stood up to a pit bull and a 110 pund German
Shepard and a 5 year old. Along those lines, they clean up very well.

The only down fall to the Verathayne is that you will have to refinish them
eventually.

EPI
"Dave Jackson" wrote in message
nk.net...
This Yank wears boots in the house, just in case i have to kick the living
**** out of some Canadian red neck someday.



"Swingman" wrote in message
...
"Jim Warman" wrote in message

Being Canadian (and as close to a red-neck as Canadians get). I wear
socks..... Brits, OTOH, wear slippers - usually some variation on

rubber
compounds for soles...... watching TV, I see Yanks wear their grubby

old
street shoes in the house.


And being Canadian of couse, you believe everything you see on TV?

Upsides... I change my socks every day and wind up polishing the things

I
walk on. The Brits don't do much good for their floors, but at least
their
socks last longer. Yanks.... well, if you're lucky, that dog turd will

at
least fall off under the coffee table....


Youd do better to change your underwear, that "dog turd" you're

imagining
under the coffee table is obviously coming up your collar.

It's mostly a joke, fercrisesakes.... but I still stand by the footwear
part.


**** you, asshole.

... hey, it's mostly a joke, fercrisesakes.

--
www.e-woodshop.net
Last update: 11/06/04







Bob Schmall January 13th 05 08:02 PM


"Puff Griffis" wrote in message
...
Thank you all for your responses. It looks like poly win's it's place on my
stairwell.
Puff

Caution--that post about slippery finishes is worth your consideration. My
wife and I have gone horizontal a couple of times on our oak treads, so we
asked on the rec. and found Skid Safe, a water-based finish from New
Dimensions (www.ndclean.com). It works--we can take the steps in our socks
now, like many Yanks. It comes only in a gloss finish, however, and will
show wear after a couple of years. And it's about $40 a quart.

Bob




All times are GMT +1. The time now is 04:45 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter