Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
FS 1st of the new year planes and 30% off the rest of my planes.
30%0 Off planes of all sorts.
The plow plane is almost finished. A few more refinements to work out. You can see the pics here http://www.knight-toolworks.com/web_.../betaplow1.JPG http://www.knight-toolworks.com/web_.../betaplow2.JPG http://www.knight-toolworks.com/web_.../betaplow3.JPG http://www.knight-toolworks.com/web_.../betaplow4.JPG I have several first of the New Year planes. http://www.knight-toolworks.com/web_...yearplanes.jpg Right now I have two pocket planes that is a 1.5" iron they are about 5" long less then 2" wide and 2" tall with nice short irons so you can use them one handed http://www.knight-toolworks.com/web_...urpleheart.jpg One in ebony and one in zircote both woods are getting hard to find. I have two small finish planes like this one http://www.knight-toolworks.com/web_...nerosewood.jpg That are 7.5" long a bit less then 3" wide and 2" high with short irons. I have one like the pic above and a bubinga one. All of these are dated numbered and signed. I have enough ebony to make two of the finish planes if interested. Email me if your interested in these one of a kind planes. New marking knives and hammers are now available. http://www.knight-toolworks.com/web_.../newknives.jpg made by CHESTER TOOLWORKS LLC and they are made from precision ground 3/32" thick O1 tool steel and are 5/16" wide. Snakewood, East Indian Rosewood, Brazilian Tulipwood, or Gabon Ebony. 44.00 for the snakewood and shipping 39.00 and shipping for the other woods. New plane adjusting hammer http://www.knight-toolworks.com/web_.../newhammer.jpg CTW hammers are designed specifically for adjusting the blades and wedges of wooden hand planes and infill hand planes. The polished brass and Lignum Vitae head is weighted toward the brass striking end and is designed so that it won't mar or mushroom the blade like steel hammers. The Lignum end is of a smaller diameter and is used to tap the toe or heel of the plane without leaving dent marks. It should also be the end used for tapping wedges tight since it won't damage the heel of the wedge. Handles are individually shaped from Quartersawn White Ash with the grain oriented to prevent the runout which weakens many other hammer handles. 45.00 plus shipping. New plane idea's http://www.knight-toolworks.com/web_...urpleheart.jpg http://www.knight-toolworks.com/web_...laybubinga.jpg I also have new tools almost ready for beta testing email me if interested. A plow plane a side rabbet plane based on a nice old design and a set of T&G planes. Knight Toolworks in conjunction with Harrolson at www.japanesetools.com have had these custom made Japanese irons made for western planes. These are the first and only hand forged/laminated Japanese irons that will fit a regular wedged plane. They are 2" wide and 5.25" long and are a bit over ¼" thick. They will drop into any knight Toolworks plane that uses a 2" iron with just a little mouth and wedge adjustment. They are made from blue steel (holds and edge longer then pretty much any tool steel on the market) and wrought iron. I believe these to be the best irons out there over O-1 and A-2 irons. They will hold an edge longer then A-2 they will get sharper they will leave a deeper/cleaner surface and they make the plane easier to use. They will really help with tearout too. They are hand stamped with Shizu Tani (tranquil valley) Shipping is 5.00 including insurance. http://www.knight-toolworks.com/web_...ironcoffin.jpg http://www.knight-toolworks.com/grap...gradeirons.jpg All planes now have finger grips and brass set screws to adjust the fit of the iron. Rock maple Purpleheart Cocobolo at an extra cost is also available. Padouk Please check my page for all my planes www.knight-toolworks.com I also have razee jointers and jack planes and scrubs. http://www.knight-toolworks.com/wooden.htm I have great looking/feeling coffin smoothers http://www.knight-toolworks.com/graphics/coffin.jpg All planes now have setscrews to center the irons in the body and make adjusting the iron easy. All planes are sanded/planed and finished with a special oil and wax finish. -- Knight-Toolworks & Custom Planes Custom made wooden planes at reasonable prices See http://www.knight-toolworks.com For prices and ordering instructions. |