30%0 Off planes of all sorts.

The plow plane is almost finished. A few more refinements to work out. You can
see the pics here
http://www.knight-toolworks.com/web_.../betaplow1.JPG
http://www.knight-toolworks.com/web_.../betaplow2.JPG
http://www.knight-toolworks.com/web_.../betaplow3.JPG
http://www.knight-toolworks.com/web_.../betaplow4.JPG

I have several first of the New Year planes.
http://www.knight-toolworks.com/web_...yearplanes.jpg
Right now I have two pocket planes that is a 1.5" iron they are about 5" long
less then 2" wide and 2" tall with nice short irons so you can use them one
handed
http://www.knight-toolworks.com/web_...urpleheart.jpg
One in ebony and one in zircote both woods are getting hard to find. I have two
small finish planes like this one
http://www.knight-toolworks.com/web_...nerosewood.jpg
That are 7.5" long a bit less then 3" wide and 2" high with short irons. I have
one like the pic above and a bubinga one. All of these are dated numbered and
signed. I have enough ebony to make two of the finish planes if interested.
Email me if your interested in these one of a kind planes.


New marking knives and hammers are now available.
http://www.knight-toolworks.com/web_.../newknives.jpg
made by CHESTER TOOLWORKS LLC and they are made from precision ground 3/32"
thick O1 tool steel and are 5/16" wide. Snakewood, East Indian Rosewood,
Brazilian Tulipwood, or Gabon Ebony. 44.00 for the snakewood and shipping 39.00
and shipping for the other woods.
New plane adjusting hammer
http://www.knight-toolworks.com/web_.../newhammer.jpg CTW hammers are
designed specifically for adjusting the blades and wedges of wooden hand planes
and infill hand planes. The polished brass and Lignum Vitae head is weighted
toward the brass striking end and is designed so that it won't mar or mushroom
the blade like steel hammers. The Lignum end is of a smaller diameter and is
used to tap the toe or heel of the plane without leaving dent marks. It should
also be the end used for tapping wedges tight since it won't damage the heel of
the wedge. Handles are individually shaped from Quartersawn White Ash with the
grain oriented to prevent the runout which weakens many other hammer handles.
45.00 plus shipping. New plane idea's
http://www.knight-toolworks.com/web_...urpleheart.jpg
http://www.knight-toolworks.com/web_...laybubinga.jpg


I also have new tools almost ready for beta testing email me if interested. A
plow plane a side rabbet plane based on a nice old design and a set of T&G
planes.



Knight Toolworks in conjunction with Harrolson at www.japanesetools.com have had
these custom made Japanese irons made for western planes. These are the first
and only hand forged/laminated Japanese irons that will fit a regular wedged
plane. They are 2" wide and 5.25" long and are a bit over ¼" thick. They will
drop into any knight Toolworks plane that uses a 2" iron with just a little
mouth and wedge adjustment. They are made from blue steel (holds and edge longer
then pretty much any tool steel on the market) and wrought iron. I believe these
to be the best irons out there over O-1 and A-2 irons. They will hold an edge
longer then A-2 they will get sharper they will leave a deeper/cleaner surface
and they make the plane easier to use. They will really help with tearout too.
They are hand stamped with Shizu Tani (tranquil valley) Shipping is 5.00
including insurance.
http://www.knight-toolworks.com/web_...ironcoffin.jpg
http://www.knight-toolworks.com/grap...gradeirons.jpg


All planes now have finger grips and brass set screws to adjust the fit of the
iron.
Rock maple
Purpleheart Cocobolo at an extra cost is also available.
Padouk
Please check my page for all my planes www.knight-toolworks.com


I also have razee jointers and jack planes and scrubs.
http://www.knight-toolworks.com/wooden.htm
I have great looking/feeling coffin smoothers
http://www.knight-toolworks.com/graphics/coffin.jpg
All planes now have setscrews to center the irons in the body and make adjusting
the iron easy.

All planes are sanded/planed and finished with a special oil and wax finish.



--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.