|
Sunny Window and Wood
I want to build a low table just under one of my windows. The window
is the sunniest one in the house. I'm concerned about the sun fading the wood... and Colorado sun is merciless. What would be a good choice of wood and finish for this? I might even put some UV protective glass on the top. I happen to have some hard maple, lyptus, and zerba wood already in my shop, not that I would not go out and buy something else....like walnut.... What say y'all? |
Maple has my vote.
"Never Enough Money" wrote in message om... I want to build a low table just under one of my windows. The window is the sunniest one in the house. I'm concerned about the sun fading the wood... and Colorado sun is merciless. What would be a good choice of wood and finish for this? I might even put some UV protective glass on the top. I happen to have some hard maple, lyptus, and zerba wood already in my shop, not that I would not go out and buy something else....like walnut.... What say y'all? |
On Sun, 31 Oct 2004 12:49:44 -0500, "Mark Hopkins"
wrote: "Never Enough Money" wrote in message . com... I want to build a low table just under one of my windows. The window is the sunniest one in the house. I'm concerned about the sun fading the wood... and Colorado sun is merciless. What would be a good choice of wood and finish for this? I might even put some UV protective glass on the top. I happen to have some hard maple, lyptus, and zerba wood already in my shop, not that I would not go out and buy something else....like walnut.... What say y'all? Maple has my vote. Just don't try dyeing it. Dyes will fade in sunlight, linseed oil will yellow -- tung oil or other finishes are probably your best bet. |
In article ,
Never Enough Money wrote: I want to build a low table just under one of my windows. The window is the sunniest one in the house. I'm concerned about the sun fading the wood... and Colorado sun is merciless. What about something like cherry? Sunlight darkens cherry rather than making it lighter. If it's a coffee table type thing, some sort of varnish would probably be a good finish. You'd want something alcohol resistant anyway. |
If you have newer windows, the sun may not be a big a problem as you think.
Many windows have a LoE coating which, simply put, is a coating of silver which filters out much of the uv rays. More recently, some windows are even coated with 2 layers of silver (LoE2) which blocks almost all the uv rays. Check the glass and see if it is marked anywhere in little letters, or maybe the manufacturer could tell you more. -dave "Never Enough Money" wrote in message om... I want to build a low table just under one of my windows. The window is the sunniest one in the house. I'm concerned about the sun fading the wood... and Colorado sun is merciless. What would be a good choice of wood and finish for this? I might even put some UV protective glass on the top. I happen to have some hard maple, lyptus, and zerba wood already in my shop, not that I would not go out and buy something else....like walnut.... What say y'all? |
|
Phisherman, you are soooo correct but I can't bring myself to covering
up beautiful wood grain. Although I could only paint the top. Some other ideas are emerging. In Colorado we have a rock called flagstone. It's very flat and you can get it in inch thick very flat pieces. The rock "stores" will cut it for you. Another idea is tile. I have some left over from a room I finished in my basement. I would have some wood trim to hold it but it would minimize the amount of wood exposed to sun. As I noted above, I have UV filters in my windows so it's not as great a worry as I originally thought. Thanks for the reply. Phisherman wrote in message . .. On 31 Oct 2004 09:39:25 -0800, (Never Enough Money) wrote: I want to build a low table just under one of my windows. The window is the sunniest one in the house. I'm concerned about the sun fading the wood... and Colorado sun is merciless. What would be a good choice of wood and finish for this? I might even put some UV protective glass on the top. I happen to have some hard maple, lyptus, and zerba wood already in my shop, not that I would not go out and buy something else....like walnut.... What say y'all? Paint is excellent UV protection. I'd build the stand out of pine or poplar and save the expensive woods for other furniture. |
| All times are GMT +1. The time now is 05:28 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter