Does anyone know which (if any) of Biesemeyer's 12 splitter sizes fits
the new Craftsman Professional table saw? The Craftsman saw is not
listed on the Biesemeyer web page (perhaps because it is too new), but
I thought maybe the guys at Orion/Craftsman might have modelled the saw
closely around the specs of a Delta left-tilt unisaw.

Anyone know of other after-market splitters that fit the Craftsman Pro saw?

Thanks.

Why don't you call Biesemeyer?

"LStole" wrote in message
news:2004102707422216807%larsstole@gsbuchicagoedu. ..
Does anyone know which (if any) of Biesemeyer's 12 splitter sizes fits
the new Craftsman Professional table saw? The Craftsman saw is not
listed on the Biesemeyer web page (perhaps because it is too new), but
I thought maybe the guys at Orion/Craftsman might have modelled the saw
closely around the specs of a Delta left-tilt unisaw.

Anyone know of other after-market splitters that fit the Craftsman Pro
saw?

Thanks.

I emailed Biesemeyer with the question; still no repsonse.



On 2004-10-27 08:53:57 -0500, "Bob" said:

Does anyone know which (if any) of Biesemeyer's 12 splitter sizes fits
the new Craftsman Professional table saw? The Craftsman saw is not
listed on the Biesemeyer web page (perhaps because it is too new), but
I thought maybe the guys at Orion/Craftsman might have modelled the saw
closely around the specs of a Delta left-tilt unisaw.

Anyone know of other after-market splitters that fit the Craftsman Pro
saw?

Thanks.

I find most vendors do not repond to email. I'd give them a call for an
authoritative answer. They are the only people that can tell if they will
definitively support the saw with the splitter.

Bob

"LStole" wrote in message
news:2004102709083216807%larsstole@gsbuchicagoedu. ..
I emailed Biesemeyer with the question; still no repsonse.



On 2004-10-27 08:53:57 -0500, "Bob" said:

Does anyone know which (if any) of Biesemeyer's 12 splitter sizes fits
the new Craftsman Professional table saw? The Craftsman saw is not
listed on the Biesemeyer web page (perhaps because it is too new), but
I thought maybe the guys at Orion/Craftsman might have modelled the saw
closely around the specs of a Delta left-tilt unisaw.

Anyone know of other after-market splitters that fit the Craftsman Pro
saw?

Thanks.

On Wed, 27 Oct 2004 17:47:55 GMT, "Bob"
wrote:

I find most vendors do not repond to email. I'd give them a call for an
authoritative answer. They are the only people that can tell if they will
definitively support the saw with the splitter.

Not to mention that the call may establish a need for a model that
does fit your saw.

Barry

I just received a response from Biesemeyer -- regrettably, they do NOT
support this saw with any of their models.

That said, I still wonder if one of their models will work. For
example, I read a posting from someone who was able to put a Delta
splitter (the one that is standard with the Uniguard) into a Jet XACTA
saw with only a slight modification.

At $120, it is an expensive experiment, however.

Lars


On 2004-10-27 12:47:55 -0500, "Bob" said:

I find most vendors do not repond to email. I'd give them a call for an
authoritative answer. They are the only people that can tell if they will
definitively support the saw with the splitter.

Bob

"LStole" wrote in message
news:2004102709083216807%larsstole@gsbuchicagoedu. ..
I emailed Biesemeyer with the question; still no repsonse.



On 2004-10-27 08:53:57 -0500, "Bob" said:

Does anyone know which (if any) of Biesemeyer's 12 splitter sizes fits
the new Craftsman Professional table saw? The Craftsman saw is not
listed on the Biesemeyer web page (perhaps because it is too new), but
I thought maybe the guys at Orion/Craftsman might have modelled the saw
closely around the specs of a Delta left-tilt unisaw.

Anyone know of other after-market splitters that fit the Craftsman Pro
saw?

Thanks.

You might want to consider the "low tech version"....

http://www.woodcraft.com/Woodcraft/p...EDF9C73F1A40F6

LStole wrote:

I just received a response from Biesemeyer -- regrettably, they do NOT
support this saw with any of their models.

That said, I still wonder if one of their models will work. For
example, I read a posting from someone who was able to put a Delta
splitter (the one that is standard with the Uniguard) into a Jet XACTA
saw with only a slight modification.

At $120, it is an expensive experiment, however.

On Wed, 27 Oct 2004 14:01:24 -0500, LStole
wrote:

I just received a response from Biesemeyer -- regrettably, they do NOT
support this saw with any of their models.

I'm still waiting for a snap-in General 650 splitter.

Barry

Which of the 3 new models are you asking about? The top of the line model
comes with a Biesemeyer.

Lee

--
To e-mail, replace "bucketofspam" with "dleegordon"

On 2004-10-27 10:20:40 -0500, "Lee Gordon" said:

Which of the 3 new models are you asking about? The top of the line model
comes with a Biesemeyer.

Lee


The top of the line model is the one I am interested in. It comes with
a Biesemeyer fence -- not a splitter.


Lars