DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   Remove Blood From Pine (https://www.diybanter.com/woodworking/68203-remove-blood-pine.html)

Buck Turgidson September 7th 04 02:20 PM

Remove Blood From Pine
 
I'm embarrassed to ask, but I got some blood on a pine door that I was
installing (my chiseling technique needs refinement). Any tricks on getting
a smear of dried blood from a pine door? Rather than painting them, I want
to stain them (with something other than blood), so I'd like to remove the
blood stain if possible.



Ace September 7th 04 02:27 PM

Have you tried using hydrogen peroxide on it? That's what I used on my shirt
to take it off to keep it from staining my clothes.


"Buck Turgidson" wrote in message
news:PAi%c.283371$Oi.282015@fed1read04...
I'm embarrassed to ask, but I got some blood on a pine door that I was
installing (my chiseling technique needs refinement). Any tricks on

getting
a smear of dried blood from a pine door? Rather than painting them, I

want
to stain them (with something other than blood), so I'd like to remove the
blood stain if possible.





Doug Miller September 7th 04 04:03 PM

In article PAi%c.283371$Oi.282015@fed1read04, "Buck Turgidson" wrote:
I'm embarrassed to ask, but I got some blood on a pine door that I was
installing (my chiseling technique needs refinement). Any tricks on getting
a smear of dried blood from a pine door? Rather than painting them, I want
to stain them (with something other than blood), so I'd like to remove the
blood stain if possible.


Hydrogen peroxide. The 3% stuff from the first-aid aisle in the drugstore will
do just fine. Don't use the stronger stuff (6% or more) that's used for
bleaching hair, as it may bleach the wood too.

The other 97% is water, so it will dampen the wood and raise the grain. Allow
the wood to dry thoroughly, then sand the spot lightly, before staining and
finishing.

One hand on the chisel. One hand on the mallet. Fingers are safe that way.

--
Regards,
Doug Miller (alphageek-at-milmac-dot-com)

Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter
by sending email to autoresponder at filterinfo-at-milmac-dot-com
You must use your REAL email address to get a response.



Old Nick September 7th 04 04:51 PM

On Tue, 7 Sep 2004 09:20:42 -0400, "Buck Turgidson"
vaguely proposed a theory
.......and in reply I say!:

remove ns from my header address to reply via email

You have to qualify for the most weird non-spam request....

appreciate your sense of humour and honesty

I'm embarrassed to ask, but I got some blood on a pine door that I was
installing (my chiseling technique needs refinement). Any tricks on getting
a smear of dried blood from a pine door? Rather than painting them, I want
to stain them (with something other than blood), so I'd like to remove the
blood stain if possible.


************************************************** ***
I know I am wrong about just about everything. So I
am not going to listen when I am told I am wrong about
the things I know I am right about.

Ray Aldridge September 7th 04 05:14 PM

First, I guess you're going to have to bleed on a piece of scrap from the
door project, so you can test whatever technique you decide to try, before
you try to clean up the actual door.

/got nothin'

NoOne N Particular September 7th 04 06:47 PM

I kinda like the look of bloodwood.

Wayne

P.S. If you have some bloody scrap, try some of the laundry preparation
stuff that us supposed to remove blood.


"Buck Turgidson" wrote in message
news:PAi%c.283371$Oi.282015@fed1read04...
I'm embarrassed to ask, but I got some blood on a pine door that I was
installing (my chiseling technique needs refinement). Any tricks on

getting
a smear of dried blood from a pine door? Rather than painting them, I

want
to stain them (with something other than blood), so I'd like to remove the
blood stain if possible.





RKP51X September 18th 04 04:24 PM

Any tricks on getting
a smear of dried blood from a pine door?


Have you checked Roy Underhill's website?
Roger Poplin dba

RKP51X September 18th 04 04:24 PM

Any tricks on getting
a smear of dried blood from a pine door?


Have you checked Roy Underhill's website?
Roger Poplin dba

Vince Heuring September 18th 04 05:45 PM

In article , RKP51X
wrote:

Any tricks on getting
a smear of dried blood from a pine door?


Have you checked Roy Underhill's website?
Roger Poplin dba


But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
until it's hot but not boiling. Daub it on with a piece of cloth or
paper towel. Of course, test it on some inconspicuous spot first.

--
Vince Heuring To email, remove the Vince.

Vince Heuring September 18th 04 05:45 PM

In article , RKP51X
wrote:

Any tricks on getting
a smear of dried blood from a pine door?


Have you checked Roy Underhill's website?
Roger Poplin dba


But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
until it's hot but not boiling. Daub it on with a piece of cloth or
paper towel. Of course, test it on some inconspicuous spot first.

--
Vince Heuring To email, remove the Vince.

patriarch September 18th 04 05:54 PM

Vince Heuring wrote in
om:

Any tricks on getting
a smear of dried blood from a pine door?


Have you checked Roy Underhill's website?
Roger Poplin dba


But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
until it's hot but not boiling. Daub it on with a piece of cloth or
paper towel. Of course, test it on some inconspicuous spot first.


But wouldn't the test logically require a new blood source? ;-)

Patriarch,
wondering just how far one should reasonably go to protect pine from
peroxide...

patriarch September 18th 04 05:54 PM

Vince Heuring wrote in
om:

Any tricks on getting
a smear of dried blood from a pine door?


Have you checked Roy Underhill's website?
Roger Poplin dba


But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
until it's hot but not boiling. Daub it on with a piece of cloth or
paper towel. Of course, test it on some inconspicuous spot first.


But wouldn't the test logically require a new blood source? ;-)

Patriarch,
wondering just how far one should reasonably go to protect pine from
peroxide...

mac davis September 20th 04 04:24 PM

On Sat, 18 Sep 2004 16:54:40 GMT, patriarch
wrote:

Vince Heuring wrote in
news:180920041045509238%VinceHeuring@dimensional. com:

Any tricks on getting
a smear of dried blood from a pine door?

Have you checked Roy Underhill's website?
Roger Poplin dba


But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
until it's hot but not boiling. Daub it on with a piece of cloth or
paper towel. Of course, test it on some inconspicuous spot first.


But wouldn't the test logically require a new blood source? ;-)

Patriarch,
wondering just how far one should reasonably go to protect pine from
peroxide...


thanks.. one of those questions that pop into your mind but you hate
to ask.. lol

Mac
03 Tahoe Widelite 26GT Travel Trailer
replaced 1958 Hilite tent trailer
99 Dodge Ram QQ 2wd - 5.9L, auto, 3:55 gears

mac davis September 20th 04 04:24 PM

On Sat, 18 Sep 2004 16:54:40 GMT, patriarch
wrote:

Vince Heuring wrote in
news:180920041045509238%VinceHeuring@dimensional. com:

Any tricks on getting
a smear of dried blood from a pine door?

Have you checked Roy Underhill's website?
Roger Poplin dba


But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
until it's hot but not boiling. Daub it on with a piece of cloth or
paper towel. Of course, test it on some inconspicuous spot first.


But wouldn't the test logically require a new blood source? ;-)

Patriarch,
wondering just how far one should reasonably go to protect pine from
peroxide...


thanks.. one of those questions that pop into your mind but you hate
to ask.. lol

Mac
03 Tahoe Widelite 26GT Travel Trailer
replaced 1958 Hilite tent trailer
99 Dodge Ram QQ 2wd - 5.9L, auto, 3:55 gears


All times are GMT +1. The time now is 07:45 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter