Hi Everyone,
I've been asked by a couple of friends if I would make a Butsudan (A
Buddhist altar)
for them. I've done a DAGS for it but can't come up with any plans. I need
to know minimum sizes etc. I found plenty of piccys but nothing to tell me
what I need to know
Can you guys help?

Thanks
Mick


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.733 / Virus Database: 487 - Release Date: 02/08/04

Through google I found a lot of sites with plenty of pix and the outside
dims. You may have to use those dims and draw something up yourself.
But there is definitely no shortage of ideas out there.
www.Butsudan.com
When I googled for butsudan, a lot of sites came back, maybe you should
look deeper in the search results?
It looks as if this is something that can be designed to suit the tastes
of your friends, quite freehand in the design.
Mark L.

Mick stanford wrote:
Hi Everyone,
I've been asked by a couple of friends if I would make a Butsudan (A
Buddhist altar)
for them. I've done a DAGS for it but can't come up with any plans. I need
to know minimum sizes etc. I found plenty of piccys but nothing to tell me
what I need to know
Can you guys help?

Thanks
Mick


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.733 / Virus Database: 487 - Release Date: 02/08/04

On Mon, 09 Aug 2004 19:52:54 GMT, "Mick stanford"
calmly ranted:

Hi Everyone,
I've been asked by a couple of friends if I would make a Butsudan (A
Buddhist altar)
for them. I've done a DAGS for it but can't come up with any plans. I need
to know minimum sizes etc. I found plenty of piccys but nothing to tell me
what I need to know
Can you guys help?

Judging by everything I've just read on a dozen sites
(yeah, I got curious, too) there is no specific size
or style requirement listed. Anything from a lone
candle holder to a room full of offering bowls, candles,
and statues is used.

Ask your friends for -their- preferences and build a
cabinet (or open altar) to suit their tastes, or have
them consult their holy man for his input, Mick.


- Woodworkers of the world, Repent! Repeat after me:
"Forgive Me Father, For I Have Stained and Polyed."
-
http://diversify.com Comprehensive Website Design

On Mon, 09 Aug 2004 19:52:54 GMT, "Mick stanford"
wrote:

I've been asked by a couple of friends if I would make a Butsudan (A
Buddhist altar)

Japanese Buddhist presumably (Nichiren ?), if they call it that. Every
tradition has its own styles, so don't expect something from Thailand
to hit the spot.

What are they after ? Floor standing or table ? Do they want an
"altar" (as Xians might understand it), a statuary cabinet, or both ?
If they follow Nichiren, then I believe they favour multiple shelves
inside the cabinet (there are several idols in there). Do they already
have a statue to place inside it, and how big is it ?

My guess would be that they want the cabinet, and probably just the
cabinet. This should have two side-hung doors, not one, and
traditionally the cabinet is oval, with proportions of about 2:1. This
stuff isn't critical, but the history of such cabinets is that they
began as portable (shoulder carried) shrines, so the size and shape
should be roughly consistent with that.

As for the style, then they're typically Japanese, yet atypical in
that they have this elliptical plan view, with a built-up carcase and
hinges. Most Japanese cabinetry is rectilinear and has either lift-off
or sliding doors. A Western cabinetry guide (Krenov ?) would explain
the techniques you'll need - a coopered carcase is typical, maybe
panelled inside in a contrasting light-coloured timber. For
moisture-proofing, much Japanese cabinetry is two-layer, with an inner
of paulownia (use lime/basswood).

If you're unfamiliar with Japanese styling, then there's a lot to
learn to get the "feel" right. Try Toshio Odate's book on tools, and
maybe the Heineken's on Tansu (small portable cabinets). There are any
number of books on Japanese "style" and aesthetics, but these two
convey some of the appropriate joinery. Remember that Japan has huge
seasonal variation in moisture, so much joinery exists to cope with
this (much worse problems than Western cabinetry has to cope with).

Older cabinets, especially the portable ones, would be lacquered. You
just can't do this in the West - if you need real lacquer, then have
it done for you in Japan or Viet Nam. Simple lacquerwork can be
emulated with black shellac, but it's not exctly right and you can't
use decorative styles like maki-e.

Timber choices are pretty broad, but you do need to get a feel for
Japanese taste (maybe not "iki" though, on a religious piece). I use
lime (basswood) for most of my internal work, because I can't get the
exact local timbers. Walnut or high-end figured softwoods are
appropriate for visible timber, but be gentle with the finishing - a
hand-planed finish should be smooth enough for the texture to be
invisible, yet still tactile. Butsudan though are a little "showier"
than domestic work - there may be a gloss finish (use shellac) or
smooth sanding, there may be inlay work (especially handles or on the
lid) in contrasting timber that would be though gaudy in most pieces.
A traditional finish would be plain black lacquer outside and gold
leaf inside - this enormous contrast between open and closed is very
much part of the style.


(I've never made a butsudan and have no intention of ever doing so. It
would be like asking a Presbyterian to display a statue of the Blessed
Virgin Mary).

I missed the original post, but....

1) Ask your friends what they want. They are your "customers" and the
best source. The more input they give you, the more they will value the
results (assuming you build what they ask for).

2) Roll your own. Personally, I have no idea why anyone would ever
build anything from someone else's plans (unless they are paying you to)
or imitating a style instead of it's essence (I will probably not be
popular here!) Half the fun of woodworking is making something that no
one has ever seen before! Besides, there are a number of people who
make traditional butsudans, so if your friends asked you to make one,
they may like the idea of one that is non-traditional.

Anyway, if they are American SGI members, there aren't a lot of hard and
fast rules. There is a great respect for cultural plularism, and there
is no reason to adopt "Japanese style" because you think you should.
Although most butsudans have places to put incense, matches, candle
holder, bowl, beads, vase, bell and Gohonzen, it's my understanding (I
may be wrong) that the Gohonzen is the only item specific to Nichiren
Buddhism. The rest are inherited from Shinto or other Japanese
ritualistic practices, though you may never get any SGI members to
explain that. (I am just assuming they are SGI Buddhists, here....)

The Butsudan's main function is to hold the Gohonzen, and small ones do
nothing else. Task A would be to look at their Gohonzen. Since there
may be several (or many) people chanting in front of it, the cabinet
should be shallow, or there should be a way for the Gohonzen to hang
toward the front of the cabinet, so that it is visible when you are not
right in front of it. Yes, two doors which open wide is good. A small
light inside (soft light, in the front, behind a top rail) to highlight
the Gohonzen would help a lot, although these are not common.

Some people chant sitting in chairs, others sit on the floor, so the
height is a user preference. That said, I think the bottom of the
Gohonzen should be just above eye level when sitting in a chair (it's
better to be looking upward a bit). Most users have a variety of the
acoutrements above, and you should find out how many and big they are.
Even better, go to a few meetings and chant nam-myoho-renge-kyo. (It's
not devil-worship, it won't kill you. But be careful--I was
brainwashed!) Scope out a lot of them--not just the cabinets, but the
whole setup.

I agree with the inside/outside contrast. "Plain on the outside and
absolutely beautiful on the inside" would be a good goal to set.


Good luck!



Andy Dingley wrote:

On Mon, 09 Aug 2004 19:52:54 GMT, "Mick stanford"
wrote:


I've been asked by a couple of friends if I would make a Butsudan (A
Buddhist altar)


Japanese Buddhist presumably (Nichiren ?), if they call it that. Every
tradition has its own styles, so don't expect something from Thailand
to hit the spot.

What are they after ? Floor standing or table ? Do they want an
"altar" (as Xians might understand it), a statuary cabinet, or both ?
If they follow Nichiren, then I believe they favour multiple shelves
inside the cabinet (there are several idols in there). Do they already
have a statue to place inside it, and how big is it ?

My guess would be that they want the cabinet, and probably just the
cabinet. This should have two side-hung doors, not one, and
traditionally the cabinet is oval, with proportions of about 2:1. This
stuff isn't critical, but the history of such cabinets is that they
began as portable (shoulder carried) shrines, so the size and shape
should be roughly consistent with that.

As for the style, then they're typically Japanese, yet atypical in
that they have this elliptical plan view, with a built-up carcase and
hinges. Most Japanese cabinetry is rectilinear and has either lift-off
or sliding doors. A Western cabinetry guide (Krenov ?) would explain
the techniques you'll need - a coopered carcase is typical, maybe
panelled inside in a contrasting light-coloured timber. For
moisture-proofing, much Japanese cabinetry is two-layer, with an inner
of paulownia (use lime/basswood).

If you're unfamiliar with Japanese styling, then there's a lot to
learn to get the "feel" right. Try Toshio Odate's book on tools, and
maybe the Heineken's on Tansu (small portable cabinets). There are any
number of books on Japanese "style" and aesthetics, but these two
convey some of the appropriate joinery. Remember that Japan has huge
seasonal variation in moisture, so much joinery exists to cope with
this (much worse problems than Western cabinetry has to cope with).

Older cabinets, especially the portable ones, would be lacquered. You
just can't do this in the West - if you need real lacquer, then have
it done for you in Japan or Viet Nam. Simple lacquerwork can be
emulated with black shellac, but it's not exctly right and you can't
use decorative styles like maki-e.

Timber choices are pretty broad, but you do need to get a feel for
Japanese taste (maybe not "iki" though, on a religious piece). I use
lime (basswood) for most of my internal work, because I can't get the
exact local timbers. Walnut or high-end figured softwoods are
appropriate for visible timber, but be gentle with the finishing - a
hand-planed finish should be smooth enough for the texture to be
invisible, yet still tactile. Butsudan though are a little "showier"
than domestic work - there may be a gloss finish (use shellac) or
smooth sanding, there may be inlay work (especially handles or on the
lid) in contrasting timber that would be though gaudy in most pieces.
A traditional finish would be plain black lacquer outside and gold
leaf inside - this enormous contrast between open and closed is very
much part of the style.


(I've never made a butsudan and have no intention of ever doing so. It
would be like asking a Presbyterian to display a statue of the Blessed
Virgin Mary).

Thanks for all the advice lads. The couple who asked me to make their
Butsudan are SGI Buddhists, although they are comparatively new to their
faith and still learning which is why they couldn't give me any hard and
fast information as to what makes up a Butsudan.
Again, many thanks, you've all been a great help
Mick



"J" wrote in message
link.net...
I missed the original post, but....

1) Ask your friends what they want. They are your "customers" and the
best source. The more input they give you, the more they will value the
results (assuming you build what they ask for).

2) Roll your own. Personally, I have no idea why anyone would ever
build anything from someone else's plans (unless they are paying you to)
or imitating a style instead of it's essence (I will probably not be
popular here!) Half the fun of woodworking is making something that no
one has ever seen before! Besides, there are a number of people who
make traditional butsudans, so if your friends asked you to make one,
they may like the idea of one that is non-traditional.

Anyway, if they are American SGI members, there aren't a lot of hard and
fast rules. There is a great respect for cultural plularism, and there
is no reason to adopt "Japanese style" because you think you should.
Although most butsudans have places to put incense, matches, candle
holder, bowl, beads, vase, bell and Gohonzen, it's my understanding (I
may be wrong) that the Gohonzen is the only item specific to Nichiren
Buddhism. The rest are inherited from Shinto or other Japanese
ritualistic practices, though you may never get any SGI members to
explain that. (I am just assuming they are SGI Buddhists, here....)

The Butsudan's main function is to hold the Gohonzen, and small ones do
nothing else. Task A would be to look at their Gohonzen. Since there
may be several (or many) people chanting in front of it, the cabinet
should be shallow, or there should be a way for the Gohonzen to hang
toward the front of the cabinet, so that it is visible when you are not
right in front of it. Yes, two doors which open wide is good. A small
light inside (soft light, in the front, behind a top rail) to highlight
the Gohonzen would help a lot, although these are not common.

Some people chant sitting in chairs, others sit on the floor, so the
height is a user preference. That said, I think the bottom of the
Gohonzen should be just above eye level when sitting in a chair (it's
better to be looking upward a bit). Most users have a variety of the
acoutrements above, and you should find out how many and big they are.
Even better, go to a few meetings and chant nam-myoho-renge-kyo. (It's
not devil-worship, it won't kill you. But be careful--I was
brainwashed!) Scope out a lot of them--not just the cabinets, but the
whole setup.

I agree with the inside/outside contrast. "Plain on the outside and
absolutely beautiful on the inside" would be a good goal to set.


Good luck!



Andy Dingley wrote:

On Mon, 09 Aug 2004 19:52:54 GMT, "Mick stanford"
wrote:


I've been asked by a couple of friends if I would make a Butsudan (A
Buddhist altar)


Japanese Buddhist presumably (Nichiren ?), if they call it that. Every
tradition has its own styles, so don't expect something from Thailand
to hit the spot.

What are they after ? Floor standing or table ? Do they want an
"altar" (as Xians might understand it), a statuary cabinet, or both ?
If they follow Nichiren, then I believe they favour multiple shelves
inside the cabinet (there are several idols in there). Do they already
have a statue to place inside it, and how big is it ?

My guess would be that they want the cabinet, and probably just the
cabinet. This should have two side-hung doors, not one, and
traditionally the cabinet is oval, with proportions of about 2:1. This
stuff isn't critical, but the history of such cabinets is that they
began as portable (shoulder carried) shrines, so the size and shape
should be roughly consistent with that.

As for the style, then they're typically Japanese, yet atypical in
that they have this elliptical plan view, with a built-up carcase and
hinges. Most Japanese cabinetry is rectilinear and has either lift-off
or sliding doors. A Western cabinetry guide (Krenov ?) would explain
the techniques you'll need - a coopered carcase is typical, maybe
panelled inside in a contrasting light-coloured timber. For
moisture-proofing, much Japanese cabinetry is two-layer, with an inner
of paulownia (use lime/basswood).

If you're unfamiliar with Japanese styling, then there's a lot to
learn to get the "feel" right. Try Toshio Odate's book on tools, and
maybe the Heineken's on Tansu (small portable cabinets). There are any
number of books on Japanese "style" and aesthetics, but these two
convey some of the appropriate joinery. Remember that Japan has huge
seasonal variation in moisture, so much joinery exists to cope with
this (much worse problems than Western cabinetry has to cope with).

Older cabinets, especially the portable ones, would be lacquered. You
just can't do this in the West - if you need real lacquer, then have
it done for you in Japan or Viet Nam. Simple lacquerwork can be
emulated with black shellac, but it's not exctly right and you can't
use decorative styles like maki-e.

Timber choices are pretty broad, but you do need to get a feel for
Japanese taste (maybe not "iki" though, on a religious piece). I use
lime (basswood) for most of my internal work, because I can't get the
exact local timbers. Walnut or high-end figured softwoods are
appropriate for visible timber, but be gentle with the finishing - a
hand-planed finish should be smooth enough for the texture to be
invisible, yet still tactile. Butsudan though are a little "showier"
than domestic work - there may be a gloss finish (use shellac) or
smooth sanding, there may be inlay work (especially handles or on the
lid) in contrasting timber that would be though gaudy in most pieces.
A traditional finish would be plain black lacquer outside and gold
leaf inside - this enormous contrast between open and closed is very
much part of the style.


(I've never made a butsudan and have no intention of ever doing so. It
would be like asking a Presbyterian to display a statue of the Blessed
Virgin Mary).



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.733 / Virus Database: 487 - Release Date: 02/08/04