I need a stragety for getting Jointer (Rockwell 37-315) knife Nuts Loose
Start by soaking them over night(ish) in Marvel Oil.
UA100 |
I need a stragety for getting Jointer (Rockwell 37-315) knife Nuts Loose
"Unisaw A100" writes: Start by soaking them over night(ish) in Marvel Oil. If that doesn't work, Kroil from Kano Labs. They are on the web. -- Lew S/A: Challenge, The Bullet Proof Boat, (Under Construction in the Southland) Visit: http://home.earthlink.net/~lewhodgett for Pictures |
I need a stragety for getting Jointer (Rockwell 37-315) knife Nuts Loose
If you do opt for the torch, try dripping candle wax around them. It saved
my butt when working on the axle of a tractor once. It really works too! "Gary" wrote in message om... I've had good luck over the years with liquid wrench. Tapping the head with a punch and hammer (lightly) sometimes helps. Last resort - you might try heat (torch) |
All times are GMT +1. The time now is 06:36 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter