ooo...ooo...ooo...a new toy in Sketchup
 

I've been drawing a couple of vanities I'll be making as soon as I finish
some tile work.

When I draw stuff I draw it in much the same manner as I'll build it. Start
with fixed stuff - walls, floor,drains etc. - draw the plinths, cabinet
bottoms & partitions, top support, face frame, doors and any cabinet built
ins, etc.

I often want to view bits and pieces so I put like things on a layer. Works
fine for me except when I get most all drawn and want to drill down to, say,
the plinths...lots of layers to turn on/off. I guess groups could work but
I've never much messed with them.

Enter "Scenes". I'm sure they are old hat to many of you but they are new
to me and they are a godsend. Now I can have a scene with all doors closed,
another with all (or some) open; I can have one with just the guts. It is
WONDERFUL and all is right with the world :)

--

dadiOH
____________________________

Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net

ooo...ooo...ooo...a new toy in Sketchup
 

On 6/29/2014 1:01 PM, dadiOH wrote:

I often want to view bits and pieces so I put like things on a layer. Works
fine for me except when I get most all drawn and want to drill down to, say,
the plinths...lots of layers to turn on/off. I guess groups could work but
I've never much messed with them.

Enter "Scenes". I'm sure they are old hat to many of you but they are new
to me and they are a godsend. Now I can have a scene with all doors closed,
another with all (or some) open; I can have one with just the guts. It is
WONDERFUL and all is right with the world :)

Yep ... Layers, assigned to Scenes, are key to making "Presentations" in
Sketchup, even if it's just for your benefit.


--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)

ooo...ooo...ooo...a new toy in Sketchup
 

On 6/29/2014 1:01 PM, dadiOH wrote:
I've been drawing a couple of vanities I'll be making as soon as I finish
some tile work.

When I draw stuff I draw it in much the same manner as I'll build it. Start
with fixed stuff - walls, floor,drains etc. - draw the plinths, cabinet
bottoms & partitions, top support, face frame, doors and any cabinet built
ins, etc.

I often want to view bits and pieces so I put like things on a layer. Works
fine for me except when I get most all drawn and want to drill down to, say,
the plinths...lots of layers to turn on/off. I guess groups could work but
I've never much messed with them.

Enter "Scenes". I'm sure they are old hat to many of you but they are new
to me and they are a godsend. Now I can have a scene with all doors closed,
another with all (or some) open; I can have one with just the guts. It is
WONDERFUL and all is right with the world :)



Scenes are pretty cool. I often will have a cabinet door opened to
different positions and each position on a different scene.

ooo...ooo...ooo...a new toy in Sketchup
 

On 7/1/2014 6:00 PM, Edward A. Falk wrote:
In article , dadiOH wrote:

Enter "Scenes". I'm sure they are old hat to many of you but they are new
to me and they are a godsend. Now I can have a scene with all doors closed,
another with all (or some) open; I can have one with just the guts. It is
WONDERFUL and all is right with the world :)

Oh, yeah, scenes + layers are a great combination. If I'm
modelling a room, I'll have several scenes that represent specific
camera views (view from door, view from corner, etc.). Then I'll
have a "view from above" scene that also hides the layer that holds
the ceiling. Then I'll have an "empty room" scene that hides all the
layers that contain furniture and trim. Then a "full room" scene
that turns all the layers on.

Sometimes I'll do something like "furniture option 1" and
"furniture option 2" which hide and show different furniture
layers.

A few simple examples:

http://www.efalk.org/Vardo/bigs/vardo002.jpg.html
http://www.efalk.org/Vardo/bigs/vardo005.jpg.html
http://www.efalk.org/Vardo/bigs/vardo006.jpg.html
http://www.efalk.org/Vardo/bigs/vardo007.jpg.html

Another trick is to make walls opaque on one side, and transparent on
the other, so you can look into the room from any viewpoint.

http://www.efalk.org/Bath/bigs/bathroom5a.png.html

Excellently executed model!

--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)

ooo...ooo...ooo...a new toy in Sketchup
 

Edward A. Falk wrote:
In article , dadiOH wrote:

Enter "Scenes". I'm sure they are old hat to many of you but they are new
to me and they are a godsend. Now I can have a scene with all doors closed,
another with all (or some) open; I can have one with just the guts. It is
WONDERFUL and all is right with the world :)

Oh, yeah, scenes + layers are a great combination. If I'm
modelling a room, I'll have several scenes that represent specific
camera views (view from door, view from corner, etc.). Then I'll
have a "view from above" scene that also hides the layer that holds
the ceiling. Then I'll have an "empty room" scene that hides all the
layers that contain furniture and trim. Then a "full room" scene
that turns all the layers on.

Sometimes I'll do something like "furniture option 1" and
"furniture option 2" which hide and show different furniture
layers.

A few simple examples:

http://www.efalk.org/Vardo/bigs/vardo002.jpg.html
http://www.efalk.org/Vardo/bigs/vardo005.jpg.html
http://www.efalk.org/Vardo/bigs/vardo006.jpg.html
http://www.efalk.org/Vardo/bigs/vardo007.jpg.html

Another trick is to make walls opaque on one side, and transparent on
the other, so you can look into the room from any viewpoint.

http://www.efalk.org/Bath/bigs/bathroom5a.png.html

But bewa this messes up renderers.


Cool! I discovered making surfaces transparent on one dude and opaque on
the other when designing our new entertainment nook in our home. I have a
model of our whole house and seeing through some of the walls in certain
instances is very helpful.

ooo...ooo...ooo...a new toy in Sketchup
 

On 7/2/2014 7:15 AM, Leon wrote:
Edward A. Falk wrote:

Another trick is to make walls opaque on one side, and transparent on
the other, so you can look into the room from any viewpoint.

http://www.efalk.org/Bath/bigs/bathroom5a.png.html

Cool! I discovered making surfaces transparent on one dude and opaque on
the other when designing our new entertainment nook in our home. I have a
model of our whole house and seeing through some of the walls in certain
instances is very helpful.


I just use one for the entire wall, the "Translucent_Glass_Gray" in the
"Translucent" Materials category:

https://picasaweb.google.com/1113554...3?noredirect=1


--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)

ooo...ooo...ooo...a new toy in Sketchup
 

"Edward A. Falk" wrote in message


Another trick is to make walls opaque on one side, and transparent on
the other, so you can look into the room from any viewpoint.

Agreed. Here's another someone may find useful...

I often make fairly detailed notes/instructions about a project. Sketchup's
built in text things are useful but aren't really up to what I need for the
aforementioned. My solution is to use a document program to write what I
want, format it as desired - complete with underlining, colors, etc - and
make a screen shot of it, saving the SS as a jpeg. I then import that jpeg
into SketchUp and use it as a "material" on a prepared surface, adjusting
the fit either by scaling the surface or editing the length/width of the new
material. Stick the surface into an "Instruction" layer and all is well :)




--

dadiOH
____________________________

Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net

ooo...ooo...ooo...a new toy in Sketchup
 

On 7/2/2014 8:03 AM, Swingman wrote:
On 7/2/2014 7:15 AM, Leon wrote:
Edward A. Falk wrote:

Another trick is to make walls opaque on one side, and transparent on
the other, so you can look into the room from any viewpoint.

http://www.efalk.org/Bath/bigs/bathroom5a.png.html

Cool! I discovered making surfaces transparent on one dude and
opaque on
the other when designing our new entertainment nook in our home. I have a
model of our whole house and seeing through some of the walls in certain
instances is very helpful.


I just use one for the entire wall, the "Translucent_Glass_Gray" in the
"Translucent" Materials category:

https://picasaweb.google.com/1113554...3?noredirect=1



FWIW you can make "ANY" material transparent and to any degree of
transparancy. You don't have to hunt down the transparent samples and
use just those.

BYPAKT Whut?

ooo...ooo...ooo...a new toy in Sketchup
 

On 7/2/2014 8:56 AM, dadiOH wrote:
"Edward A. Falk" wrote in message


Another trick is to make walls opaque on one side, and transparent on
the other, so you can look into the room from any viewpoint.

Agreed. Here's another someone may find useful...

I often make fairly detailed notes/instructions about a project. Sketchup's
built in text things are useful but aren't really up to what I need for the
aforementioned. My solution is to use a document program to write what I
want, format it as desired - complete with underlining, colors, etc - and
make a screen shot of it, saving the SS as a jpeg. I then import that jpeg
into SketchUp and use it as a "material" on a prepared surface, adjusting
the fit either by scaling the surface or editing the length/width of the new
material. Stick the surface into an "Instruction" layer and all is well :)




Good to know!

ooo...ooo...ooo...a new toy in Sketchup
 

On 7/2/2014 12:54 PM, Leon wrote:

FWIW you can make "ANY" material transparent and to any degree of
transparancy. You don't have to hunt down the transparent samples and
use just those.

BYPAKT Whut?

Yep, but I don't have to hunt down anything. I have a materials folder
with materials I routinely use that shows up when I grab the paint
brush. One click, I get the effect I want without having to adjust
anything. ;)

--
eWoodShop: www.eWoodShop.com
Wood Shop: www.e-WoodShop.net
https://www.google.com/+eWoodShop
https://plus.google.com/+KarlCaillouet/posts
http://www.custommade.com/by/ewoodshop/
KarlCaillouet@ (the obvious)

ooo...ooo...ooo...a new toy in Sketchup
 

On 7/2/2014 1:20 PM, Swingman wrote:
On 7/2/2014 12:54 PM, Leon wrote:

FWIW you can make "ANY" material transparent and to any degree of
transparancy. You don't have to hunt down the transparent samples and
use just those.

BYPAKT Whut?

Yep, but I don't have to hunt down anything. I have a materials folder
with materials I routinely use that shows up when I grab the paint
brush. One click, I get the effect I want without having to adjust
anything. ;)



BTW Sharp finally decided to replace the TV.

ooo...ooo...ooo...a new toy in Sketchup
 

On 7/1/2014 7:00 PM, Edward A. Falk wrote:
In article , dadiOH wrote:

Enter "Scenes". I'm sure they are old hat to many of you but they are new
to me and they are a godsend. Now I can have a scene with all doors closed,
another with all (or some) open; I can have one with just the guts. It is
WONDERFUL and all is right with the world :)

Oh, yeah, scenes + layers are a great combination. If I'm
modelling a room, I'll have several scenes that represent specific
camera views (view from door, view from corner, etc.). Then I'll
have a "view from above" scene that also hides the layer that holds
the ceiling. Then I'll have an "empty room" scene that hides all the
layers that contain furniture and trim. Then a "full room" scene
that turns all the layers on.

Sometimes I'll do something like "furniture option 1" and
"furniture option 2" which hide and show different furniture
layers.

A few simple examples:

http://www.efalk.org/Vardo/bigs/vardo002.jpg.html

Well done.

How does this collapse? I ask because I have a similar trailer, called a
HiLo. This has tracks and 4 wires that wind on a spool. I can not see
how you would do this with your model, but I love the concept.

http://www.efalk.org/Vardo/bigs/vardo005.jpg.html
http://www.efalk.org/Vardo/bigs/vardo006.jpg.html
http://www.efalk.org/Vardo/bigs/vardo007.jpg.html

Another trick is to make walls opaque on one side, and transparent on
the other, so you can look into the room from any viewpoint.

http://www.efalk.org/Bath/bigs/bathroom5a.png.html

But bewa this messes up renderers.



--
pentapus