|
Sometimes we're just a genius...
On 1/25/2014 8:42 PM, Mike Marlow wrote:
...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. -- Jeff |
Sometimes we're just a genius...
woodchucker wrote:
On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. No Jeff - I WAS a genius - all those years ago. I came up with that great idea and then somehow forgot all about it. Today - not so much genius. -- -Mike- |
Sometimes we're just a genius...
On Sat, 25 Jan 2014 20:42:17 -0500, "Mike Marlow"
Clearly genius! Then I saw who posted this - years and years ago.... me... One of the few advantages of senility. ~ Many things seems new again. |
Sometimes we're just a genius...
On 1/25/2014 8:42 PM, Mike Marlow wrote:
...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... My neighbor does not think it is such a brilliant idea. My chisels are well protected, but his pool leaks. |
Sometimes we're just a genius...
Ed Pawlowski wrote:
On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... My neighbor does not think it is such a brilliant idea. My chisels are well protected, but his pool leaks. One might come to the conclusion that if the swimming pool liner strips worked out well that you would still be using those and not looking for that solution. :-) |
Sometimes we're just a genius...
On 1/25/2014 7:44 PM, woodchucker wrote:
On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. Figure out Sketchup!!!!!! LOL I make very few misscuts these days knowing that the drawings are reliable. |
Sometimes we're just a genius...
On 1/25/2014 8:42 PM, Mike Marlow wrote:
woodchucker wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. No Jeff - I WAS a genius - all those years ago. I came up with that great idea and then somehow forgot all about it. Today - not so much genius. You are no less genius today that you were then! You just don't remember why you quit using the pool parts as your chisel protectors. I think most of the protective tips get lost because they come off inside a drawer. I have seen a tip to glue a rare earth magnet to the protector so that it does not come off with out some effort. |
Sometimes we're just a genius...
On 1/26/2014 11:39 AM, Leon wrote:
On 1/25/2014 8:42 PM, Mike Marlow wrote: woodchucker wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. No Jeff - I WAS a genius - all those years ago. I came up with that great idea and then somehow forgot all about it. Today - not so much genius. You are no less genius today that you were then! You just don't remember why you quit using the pool parts as your chisel protectors. I think most of the protective tips get lost because they come off inside a drawer. I have seen a tip to glue a rare earth magnet to the protector so that it does not come off with out some effort. I don't like magnetizing chisels or planes. When you sharpen you are causing a mess. Would rather not have that problem. -- Jeff |
Sometimes we're just a genius...
Ed Pawlowski wrote:
On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... My neighbor does not think it is such a brilliant idea. My chisels are well protected, but his pool leaks. Ooops - meant to say the plastic clips that hold the liner to the wall. -- -Mike- |
Sometimes we're just a genius...
Leon wrote:
Ed Pawlowski wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... My neighbor does not think it is such a brilliant idea. My chisels are well protected, but his pool leaks. One might come to the conclusion that if the swimming pool liner strips worked out well that you would still be using those and not looking for that solution. :-) Or... one might read what I wrote and understand that the brilliance of that idea was simply lost on me over time. They do work. Just don't understand for the life of me, why I didn't remember that. -- -Mike- |
Sometimes we're just a genius...
"Mike Marlow" wrote in message ... ....and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... -- -Mike- Mike Even a genius looses memory as they age. Join the crowd of us old farts. WW |
Sometimes we're just a genius...
On 1/26/2014 2:15 PM, Mike Marlow wrote:
Leon wrote: Ed Pawlowski wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... My neighbor does not think it is such a brilliant idea. My chisels are well protected, but his pool leaks. One might come to the conclusion that if the swimming pool liner strips worked out well that you would still be using those and not looking for that solution. :-) Or... one might read what I wrote and understand that the brilliance of that idea was simply lost on me over time. They do work. Just don't understand for the life of me, why I didn't remember that. But did not those pool style protectors get lost too? Hence you forgot about them? |
Sometimes we're just a genius...
On 1/26/2014 2:07 PM, woodchucker wrote:
On 1/26/2014 11:39 AM, Leon wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: woodchucker wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. No Jeff - I WAS a genius - all those years ago. I came up with that great idea and then somehow forgot all about it. Today - not so much genius. You are no less genius today that you were then! You just don't remember why you quit using the pool parts as your chisel protectors. I think most of the protective tips get lost because they come off inside a drawer. I have seen a tip to glue a rare earth magnet to the protector so that it does not come off with out some effort. I don't like magnetizing chisels or planes. When you sharpen you are causing a mess. Would rather not have that problem. Well, placing the magnet on and removing the magnet should cancel out the magnetism. That is usually how that all works. |
Sometimes we're just a genius...
Leon wrote:
On 1/25/2014 8:42 PM, Mike Marlow wrote: woodchucker wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. No Jeff - I WAS a genius - all those years ago. I came up with that great idea and then somehow forgot all about it. Today - not so much genius. You are no less genius today that you were then! You just don't remember why you quit using the pool parts as your chisel protectors. I think most of the protective tips get lost because they come off inside a drawer. I have seen a tip to glue a rare earth magnet to the protector so that it does not come off with out some effort. Well, actually, these did work pretty well. I just really and truly forgot about them. Don't try to overthink this Leon. I quit using them because somewhere along the way I came upon a couple of the sizes I needed that were factory protectors and they looked better. Once I got back to the point where I had again lost one or two, I was back to looking for a decent solution. -- -Mike- |
Sometimes we're just a genius...
Leon wrote:
On 1/26/2014 2:15 PM, Mike Marlow wrote: Leon wrote: Ed Pawlowski wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... My neighbor does not think it is such a brilliant idea. My chisels are well protected, but his pool leaks. One might come to the conclusion that if the swimming pool liner strips worked out well that you would still be using those and not looking for that solution. :-) Or... one might read what I wrote and understand that the brilliance of that idea was simply lost on me over time. They do work. Just don't understand for the life of me, why I didn't remember that. But did not those pool style protectors get lost too? Hence you forgot about them? Nope. Came across some factory protectors and used those. Until I lost some more... -- -Mike- |
Sometimes we're just a genius...
"Mike Marlow" wrote in news:lc3q4e$tud$1
@dont-email.me: Ooops - meant to say the plastic clips that hold the liner to the wall. Ah! I was wondering how thin vinyl would offer any protection against a sharp cutting edge. My sister made some using the webbing that they use on duffle bags and other straps. They're holding up great, and have a bit of material on the top to tie the guard to the chisel. Puckdropper -- Make it to fit, don't make it fit. |
Sometimes we're just a genius...
On 1/26/2014 6:23 PM, Mike Marlow wrote:
Leon wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: woodchucker wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... `And sometimes we're not. I have had a rough day. I just cut the wrong side of something. I f'd up a drawer front too today. I couldn't figure out sketchup to do a dust bin for the saw. Then I had a brain fart while calculating the angles, and sizes... Glad that you're a genius... I was a half wit today. No Jeff - I WAS a genius - all those years ago. I came up with that great idea and then somehow forgot all about it. Today - not so much genius. You are no less genius today that you were then! You just don't remember why you quit using the pool parts as your chisel protectors. I think most of the protective tips get lost because they come off inside a drawer. I have seen a tip to glue a rare earth magnet to the protector so that it does not come off with out some effort. Well, actually, these did work pretty well. I just really and truly forgot about them. Don't try to overthink this Leon. I quit using them because somewhere along the way I came upon a couple of the sizes I needed that were factory protectors and they looked better. Once I got back to the point where I had again lost one or two, I was back to looking for a decent solution. Ok, I understand now. I was not aware that you had temporarily found a better choice. Now it all fits in to place nicely! |
Sometimes we're just a genius...
On 1/26/2014 6:25 PM, Mike Marlow wrote:
Leon wrote: On 1/26/2014 2:15 PM, Mike Marlow wrote: Leon wrote: Ed Pawlowski wrote: On 1/25/2014 8:42 PM, Mike Marlow wrote: ...and sometimes we're not. I was noodling around on the net tonight looking for ideas or replacement edge protectors for my chisels, because more than one of mine have disappeared. I found all kinds of ideas that had varying degrees of interest for me and then I stumbled onto this piece of absolute genius. This one fellow suggested cutting strips of above ground swimming pool liner to the needed width for the chisel in question. Absolute brilliance, I realized. Clearly genius! Then I saw who posted this - years and years ago.... me... My neighbor does not think it is such a brilliant idea. My chisels are well protected, but his pool leaks. One might come to the conclusion that if the swimming pool liner strips worked out well that you would still be using those and not looking for that solution. :-) Or... one might read what I wrote and understand that the brilliance of that idea was simply lost on me over time. They do work. Just don't understand for the life of me, why I didn't remember that. But did not those pool style protectors get lost too? Hence you forgot about them? Nope. Came across some factory protectors and used those. Until I lost some more... I replied in another post, I see your whole point now. Thanks. |
Sometimes we're just a genius...
Not that easy. It takes AC coil around or on a core that moves to clean
the magnetized item. The softer the steel (iron) the faster it becomes magnetized. One favorite trick I have is to put my Cross or Phillips / slot screw driver into the hex holder with a strong magnet - used with electric drills. That works rapidly and lasts a long time. Martin On 1/26/2014 5:30 PM, Leon wrote: Well, placing the magnet on and removing the magnet should cancel out the magnetism. That is usually how that all works. |
Sometimes we're just a genius...
That sounds good - and so does a thick inter tube for a bicycle or car/....
Longwise along the blade a long fold that folds over - making for a sheath. Tie wrap or tie cord. A little sloppy is ok. Cover the whole blade as this keeps it in place easier. As blade to blade becomes several thicknesses between each other. Sliding cuts can occur. But most of the time it bounces back. Martin On 1/26/2014 8:39 PM, Puckdropper wrote: "Mike Marlow" wrote in news:lc3q4e$tud$1 @dont-email.me: Ooops - meant to say the plastic clips that hold the liner to the wall. Ah! I was wondering how thin vinyl would offer any protection against a sharp cutting edge. My sister made some using the webbing that they use on duffle bags and other straps. They're holding up great, and have a bit of material on the top to tie the guard to the chisel. Puckdropper |
| All times are GMT +1. The time now is 11:33 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter