|
wow you guys are quiet
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the
binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. -- Jeff |
wow you guys are quiet
woodchucker wrote:
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. HF is an hour's drive away from me, and besides--I'm all clamped out. Now if they still had the better turning set like they used to, I would get another one. They make good starting points for design your own scrapers. -- GW Ross They told me I was gullible ... and I believed them! |
wow you guys are quiet
On Tue, 12 Mar 2013 20:16:00 -0400, woodchucker wrote:
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. Nice! I was unaware HF sold KliKlamp type clamps. According to the pic you posted it looks like they are item number 60434 but that's not found on their web site. Are they a new item and not yet on HF's web site or were they bought years ago and have since been discontinued? SORRY, NO ITEMS FOUND FOR ''60434'' http://www.harborfreight.com/catalog...esult/?q=60434 |
wow you guys are quiet
"woodchucker" wrote in message ... I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. -- Jeff It would help if the picture showed up. WW |
wow you guys are quiet
"woodchucker" wrote in message ... I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. -- Jeff Checked again and the photo came through. WW |
wow you guys are quiet
On Tuesday, March 12, 2013 8:16:00 PM UTC-4, woodchucker wrote:
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. Seriously. Who's up next for "how do i fill a hole"? JP grumble |
wow you guys are quiet
|
wow you guys are quiet
"JayPique" wrote: Seriously. Who's up next for "how do i fill a hole"? JP grumble -------------------------------- Depends on the hole. Lew |
wow you guys are quiet
"G. Ross" wrote in message ... woodchucker wrote: I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. HF is an hour's drive away from me, and besides--I'm all clamped out. Now if they still had the better turning set like they used to, I would get another one. They make good starting points for design your own scrapers. -- GW Ross They told me I was gullible ... and I believed them! GW, both of our HF here in the Chicago burbs have the old set (dark purple handles) I have a couple sets that I've turned into many custom scrapers! Dan |
wow you guys are quiet
"Lew Hodgett" wrote in news:513fefbd$0$21104
: "JayPique" wrote: Seriously. Who's up next for "how do i fill a hole"? JP grumble -------------------------------- Depends on the hole. Lew I like to fill mine with a special filler: 78% Element 3, 21% Element 8, and 1% other. It works great for all holes, and when you don't need it any more you can easily remove it to fill the hole with something else. Puckdropper -- Make it to fit, don't make it fit. |
wow you guys are quiet
woodchucker wrote:
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. I couldn't find a "geared ratchet clamp" on the HF site. Perhaps if you provided an item number...? |
wow you guys are quiet
"JayPique" wrote in message
... You all must be sick, or dying. Seriously. Who's up next for "how do i fill a hole"? Are you suggesting that the holes be filled with the sick, dying or dead? |
wow you guys are quiet
On Tuesday, March 12, 2013 7:16:00 PM UTC-5, woodchucker wrote:
I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. -- Jeff We are making sawdust. |
wow you guys are quiet
On 3/12/2013 9:59 PM, Spalted Walt wrote:
On Tue, 12 Mar 2013 20:16:00 -0400, woodchucker wrote: I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. Nice! I was unaware HF sold KliKlamp type clamps. According to the pic you posted it looks like they are item number 60434 but that's not found on their web site. Are they a new item and not yet on HF's web site or were they bought years ago and have since been discontinued? SORRY, NO ITEMS FOUND FOR ''60434'' http://www.harborfreight.com/catalog...esult/?q=60434 yep that the number. And I saw them about 3 or 4 months ago and did not find them on the web site. Went in this past Sunday and expected to pay $19.99 plus 20% off coupon, but it was on sale plus the 20% and it wound up 8.38... so I sent the wife in... Going to get more. I ground off the nubs on the pad. These are great clamps for that price, or even more. -- Jeff |
wow you guys are quiet
On 3/13/2013 9:30 AM, HeyBub wrote:
woodchucker wrote: I posted the HF geared ratchet clamp like the Bessey KliKlamp on the binaries and not one of you commented. good ,bad or rant. You all must be sick, or dying. I couldn't find a "geared ratchet clamp" on the HF site. Perhaps if you provided an item number...? it is item # 60434 like spalted walt said.. it's not on the site.. and that makes it impossible to track for sales. -- Jeff |
wow you guys are quiet
In article om,
Lew Hodgett wrote: "JayPique" wrote: Seriously. Who's up next for "how do i fill a hole"? JP grumble -------------------------------- Depends on the hole. Lew Surely he can't go wrong with epoxy and micro-baloons, right Lew? :) -- There are no stupid questions, but there are lots of stupid answers. Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf. lonestar. org |
wow you guys are quiet
"JayPique" wrote:
Seriously. Who's up next for "how do i fill a hole"? JP grumble -------------------------------- Lew Hodgett wrote: Depends on the hole. Lew ---------------------------------- "Larry W" wrote: Surely he can't go wrong with epoxy and micro-baloons, right Lew? ------------------------------------- Don't think I'd go quite that farG. Lew |
wow you guys are quiet
On Wed, 13 Mar 2013 18:13:24 -0400, woodchucker wrote:
yep that the number. And I saw them about 3 or 4 months ago and did not find them on the web site. Went in this past Sunday and expected to pay $19.99 plus 20% off coupon, but it was on sale plus the 20% and it wound up 8.38... so I sent the wife in... Going to get more. I ground off the nubs on the pad. These are great clamps for that price, or even more. Called 3 different HF in my area, 1 store had 2 in stock, the rest were out and didn't expect to get any in - since the 60434 clamp is a "clearance item". I grabbed the remaining 2 although 1 was missing the rubber pad. I'll epoxy a pad that I bought a couple of years ago: http://www.harborfreight.com/9-pairs...ads-91952.html Every bit as strong as the Bessey, if not stronger... http://holzwerkerblog.de/wp-content/...y_kliklamp.jpg |
| All times are GMT +1. The time now is 05:39 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter