Office Desk Progress and Scientific SAG testing
I completed the major portion of the upper desk cabinet yesterday. This
morning my wife and I brought the monster into the house and placed it on the desk. we did this at this stage mostly to insure that the unit would actually negotiate the double doors entering into the office. I wanted to do this before proceeding and finding out it just would not fit. ;~) The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ Below is the test fit on top of the desk. I still have quite a bit to do, add doors, cabinet backs, varnish on the outer surface of the front and back face frame, add feet to secure the unit to the desk top, a cubby unit to house 9 in/out drawers in the middle, the center arch trim to match the doors, and the top trim. http://www.flickr.com/photos/lcb1121...ream/lightbox/ The plans. http://www.flickr.com/photos/lcb1121...ream/lightbox/ |
Office Desk Progress and Scientific SAG testing
"Leon" lcb11211@swbelldotnet wrote The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ I just can't help myself with an opening like this one. Is that the "Leon Fat Ass Sag Test"? G,D&R |
Office Desk Progress and Scientific SAG testing
On 3/8/2013 11:04 AM, Lee Michaels wrote:
"Leon" lcb11211@swbelldotnet wrote The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ I just can't help myself with an opening like this one. Is that the "Leon Fat Ass Sag Test"? G,D&R Yeah! the LFAST. Should be inducted in to the FIG! |
Office Desk Progress and Scientific SAG testing
On 3/8/2013 11:04 AM, Lee Michaels wrote:
"Leon" lcb11211@swbelldotnet wrote The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ I just can't help myself with an opening like this one. Is that the "Leon Fat Ass Sag Test"? G,D&R I guess I should have captioned that picture with "Does this make my butt look big?" LOL |
Office Desk Progress and Scientific SAG testing
On 3/8/2013 11:51 AM, Leon wrote:
I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ Judging by the picture, your pants seem to fit just fine. As for the future, we all sag eventually. |
Office Desk Progress and Scientific SAG testing
"Lee Michaels" leemichaels*nadaspam* at comcast dot net wrote:
"Leon" lcb11211@swbelldotnet wrote The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ I just can't help myself with an opening like this one. Is that the "Leon Fat Ass Sag Test"? G,D&R The sag ain't in the span ... ;‚¬) -- www.ewoodshop.com (Mobile) |
Office Desk Progress and Scientific SAG testing
Leon wrote:
I completed the major portion of the upper desk cabinet yesterday. This morning my wife and I brought the monster into the house and placed it on the desk. we did this at this stage mostly to insure that the unit would actually negotiate the double doors entering into the office. I wanted to do this before proceeding and finding out it just would not fit. ;~) The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ Below is the test fit on top of the desk. I still have quite a bit to do, add doors, cabinet backs, varnish on the outer surface of the front and back face frame, add feet to secure the unit to the desk top, a cubby unit to house 9 in/out drawers in the middle, the center arch trim to match the doors, and the top trim. http://www.flickr.com/photos/lcb1121...ream/lightbox/ The plans. http://www.flickr.com/photos/lcb1121...ream/lightbox/ In the interest of photographic interest you should have let your wife do the sag test. ;) -- GW Ross A Canadian is an unarmed American with health insurance |
Office Desk Progress and Scientific SAG testing
On 3/8/2013 3:18 PM, G. Ross wrote:
Leon wrote: I completed the major portion of the upper desk cabinet yesterday. This morning my wife and I brought the monster into the house and placed it on the desk. we did this at this stage mostly to insure that the unit would actually negotiate the double doors entering into the office. I wanted to do this before proceeding and finding out it just would not fit. ;~) The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ Below is the test fit on top of the desk. I still have quite a bit to do, add doors, cabinet backs, varnish on the outer surface of the front and back face frame, add feet to secure the unit to the desk top, a cubby unit to house 9 in/out drawers in the middle, the center arch trim to match the doors, and the top trim. http://www.flickr.com/photos/lcb1121...ream/lightbox/ The plans. http://www.flickr.com/photos/lcb1121...ream/lightbox/ In the interest of photographic interest you should have let your wife do the sag test. ;) I'll mention that to her. ;~) |
Office Desk Progress and Scientific SAG testing
On 3/8/2013 3:18 PM, G. Ross wrote:
Leon wrote: I completed the major portion of the upper desk cabinet yesterday. This morning my wife and I brought the monster into the house and placed it on the desk. we did this at this stage mostly to insure that the unit would actually negotiate the double doors entering into the office. I wanted to do this before proceeding and finding out it just would not fit. ;~) The design strongly relies on the strength of the 4, 3 1/2" oak rails that span the 90+ inches. The method used to test for SAG shown below is tried and true for me. I believe that there should be no noticeable future sag. http://www.flickr.com/photos/lcb1121...ream/lightbox/ Below is the test fit on top of the desk. I still have quite a bit to do, add doors, cabinet backs, varnish on the outer surface of the front and back face frame, add feet to secure the unit to the desk top, a cubby unit to house 9 in/out drawers in the middle, the center arch trim to match the doors, and the top trim. http://www.flickr.com/photos/lcb1121...ream/lightbox/ The plans. http://www.flickr.com/photos/lcb1121...ream/lightbox/ In the interest of photographic interest you should have let your wife do the sag test. ;) NO WAY!!! My butt is bigger than his and will not withstand the comments made here Just ask Swingman. Kim |
Office Desk Progress and Scientific SAG testing
Well sir, I am going to throw out the old "sagulator" program.
I have a new benchmark. I wasn't ready for that pic, but just about knocked my laptop off my lap I was laughing so hard! Desk looks great, Leon. And we know for sure it will hold up a couple of machines, right? ;^) Robert |
Office Desk Progress and Scientific SAG testing
" wrote:
Well sir, I am going to throw out the old "sagulator" program. I have a new benchmark. I wasn't ready for that pic, but just about knocked my laptop off my lap I was laughing so hard! Desk looks great, Leon. And we know for sure it will hold up a couple of machines, right? ;^) Robert Glad to have put a smile on your face :-). |
All times are GMT +1. The time now is 03:44 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter