Jet introduces incredibly large lathe
Jet has introduced a new 12' x 21' capacity lathe.
http://www.jettools.com/us/en/p/wood...g-lathe/719200 |
Jet introduces incredibly large lathe
On Fri, 15 Feb 2013 15:44:42 -0600, Leon wrote:
Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 I was all set to order one... basilisk |
Jet introduces incredibly large lathe
On 2/15/2013 3:44 PM, Leon wrote:
Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 Remarkably, they can offer that at $800 price-point... -- |
Jet introduces incredibly large lathe
"Leon" lcb11211@swbelldotnet wrote in message ... Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 If I only had a shop with a 40+ foot ceiling. Art |
Jet introduces incredibly large lathe
Further evidence the proofreading is for wimps!
RonB |
Jet introduces incredibly large lathe
On Fri, 15 Feb 2013 15:44:42 -0600, Leon lcb11211@swbelldotnet
wrote: Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 Question. I'm going to turn some 19' columns on it. Do I run it at the full 3600 rpm? |
Jet introduces incredibly large lathe
Leon lcb11211@swbelldotnet wrote:
Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 Turning Man at Burning Man ... -- www.ewoodshop.com (Mobile) |
Jet introduces incredibly large lathe
Ed Pawlowski wrote in
: On Fri, 15 Feb 2013 15:44:42 -0600, Leon lcb11211@swbelldotnet wrote: Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 Question. I'm going to turn some 19' columns on it. Do I run it at the full 3600 rpm? I believe it's always a good idea to start slow until the piece is round, then you can run it at whatever speed you want. Puckdropper -- Make it to fit, don't make it fit. |
Jet introduces incredibly large lathe
Good catch.
Look at the spec data on the right of the page - lists inches. Martin On 2/15/2013 5:36 PM, Artemus wrote: "Leon" lcb11211@swbelldotnet wrote in message ... Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 If I only had a shop with a 40+ foot ceiling. Art |
Jet introduces incredibly large lathe
On Fri, 15 Feb 2013 15:44:42 -0600, Leon lcb11211@swbelldotnet
wrote: Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 FInally, I can turn those telephone poles that have been lying around the yard into useful table legs. |
Jet introduces incredibly large lathe
On 2/15/2013 11:23 PM, Martin Eastburn wrote:
Good catch. Look at the spec data on the right of the page - lists inches. Yeahbut... I wonder if some clown will file a lawsuit over that error looking to pick up a free lathe. |
Jet introduces incredibly large lathe
Zz Yzx wrote:
On Fri, 15 Feb 2013 15:44:42 -0600, Leon lcb11211@swbelldotnet wrote: Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 FInally, I can turn those telephone poles that have been lying around the yard into useful table legs. Yeah if only the power companies would turn the poles a final time they would look so much better. :-) |
Jet introduces incredibly large lathe
On Fri, 15 Feb 2013 15:44:42 -0600, Leon lcb11211@swbelldotnet
wrote: Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 Remember Tom Plamann's huge shop-built lathe? For turing architectural columns. |
Jet introduces incredibly large lathe
On 2/16/2013 10:07 AM, Zz Yzx wrote:
On Fri, 15 Feb 2013 15:44:42 -0600, Leon lcb11211@swbelldotnet wrote: Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 Remember Tom Plamann's huge shop-built lathe? For turing architectural columns. Yes! I don't think it had that 12' tall capacity however. ;~) |
Jet introduces incredibly large lathe
On 2/15/2013 4:00 PM, Puckdropper wrote:
Leon lcb11211@swbelldotnet wrote in news:wr2dnd5AU- : Jet has introduced a new 12' x 21' capacity lathe. http://www.jettools.com/us/en/p/wood...g-lathe/719200 All they need is a set of turning tools that you can put on a tractor bucket and you'll be set! Nothing like "Real Man" turning. Puckdropper http://www.dailymotion.com/video/xsn...h#.USe7WWd3Ezg |
All times are GMT +1. The time now is 11:22 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter