DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   Solar update for 1st quarter (https://www.diybanter.com/woodworking/337944-solar-update-1st-quarter.html)

Martin Eastburn April 1st 12 03:51 AM

Solar update for 1st quarter
 
Sometime during the night the engine block cracked -
I think it was fatigue and the oil drained out. Once the
black stuff got out (liquid smake ?!) it was all over.

Now, and someday, I might take the alternator and consider a homemade
job or buy a new engine. Still awiting a bright idea.

I'm thinking a 'Dutch' windmill generator - lawn decoration.
But most of our wind is 20 feet and higher.

Martin

On 3/30/2012 10:31 PM, Lew Hodgett wrote:
"Martin Eastburn" wrote:
Caution -
that is an RV generator - the 220 volt looking plug isn't.


Mine is somewhat like that - my Honda ran to long - over a week and
it was to hard on it.

---------------------------------
A tip for running 10HP Max Eng-Gen sets

Run straight SAE 30 oil and change every 40 running hours or
quarterly.

Learned this the hard way from a small engine specialist.

Lew




Lew Hodgett[_6_] April 1st 12 06:11 AM

Solar update for 1st quarter
 

"Martin Eastburn" wrote:

Sometime during the night the engine block cracked -
I think it was fatigue and the oil drained out. Once the
black stuff got out (liquid smake ?!) it was all over.

--------------------------
May have also been corrosive by products of combustion that weakened
housing.

That was the basic reason for frequent flushing.

BTW, I threw a con rod that had worn egg shaped.

Lew





All times are GMT +1. The time now is 08:00 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter