Removing a Morse Taper Tool - 33 Seconds or Less
 

Thought this might be useful for some here. I believe I put this out there
before for all to see a while back, but the recent discussions I had offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://tinyurl.com/AutoDrill-Facebook

V8013-R

Removing a Morse Taper Tool - 33 Seconds or Less
 

Joe AutoDrill wrote:
Thought this might be useful for some here. I believe I put this out there
before for all to see a while back, but the recent discussions I had offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4


Good tip if you have an industrial DP, but my old Delta and my new
Ridgid neither have a slot for such a tool.


--
Gerald Ross
Cochran, GA

Never ask a barber whether you need a
haircut.

Removing a Morse Taper Tool - 33 Seconds or Less
 

"Gerald Ross" wrote in message
...
Joe AutoDrill wrote:
Thought this might be useful for some here. I believe I put this out
there
before for all to see a while back, but the recent discussions I had
offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4


Good tip if you have an industrial DP, but my old Delta and my new Ridgid
neither have a slot for such a tool.

Most of the larger units have Morse Tapers... Most of the smaller bench top
and even some floor models use the Jacobs Taper mount only.

I'm probably going to make a video for that too some day. :)
--


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://tinyurl.com/AutoDrill-Facebook

V8013-R

Removing a Morse Taper Tool - 33 Seconds or Less
 

On Tue, 01 Mar 2011 11:57:05 -0500, Gerald Ross wrote:


Good tip if you have an industrial DP, but my old Delta and my new
Ridgid neither have a slot for such a tool.

I have a Taiwanese bench top drill press I bought many years ago. It has
the slot and the tool came with it. And I don't think a bench top
qualifies as industrial grade.

I guess I'll have to look around if I ever need a new drill press.

--
Intelligence is an experiment that failed - G. B. Shaw

Removing a Morse Taper Tool - 33 Seconds or Less
 

Joe AutoDrill wrote:
"Gerald wrote in message
...
Joe AutoDrill wrote:
Thought this might be useful for some here. I believe I put this out
there
before for all to see a while back, but the recent discussions I had
offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4


Good tip if you have an industrial DP, but my old Delta and my new Ridgid
neither have a slot for such a tool.

Most of the larger units have Morse Tapers... Most of the smaller bench top
and even some floor models use the Jacobs Taper mount only.

I'm probably going to make a video for that too some day. :)

Actually both mine have Morse and jacobs tapers. My delta Morse taper
started falling out once but I finally got it to stay. Guess they
were just cheap models.

--
Gerald Ross
Cochran, GA

Never ask a barber whether you need a
haircut.

Removing a Morse Taper Tool - 33 Seconds or Less
 

"Gerald Ross" wrote in message
...
Joe AutoDrill wrote:
Thought this might be useful for some here. I believe I put this out
there
before for all to see a while back, but the recent discussions I had
offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4


Good tip if you have an industrial DP, but my old Delta and my new Ridgid
neither have a slot for such a tool.


Bummer. My new Delta came with the slot and the tool, IIRC my old Rockwell
did too.

Removing a Morse Taper Tool - 33 Seconds or Less
 

On Mar 1, 9:29*am, "Joe AutoDrill" wrote:
Thought this might be useful for some here. *I believe I put this out there
before for all to see a while back, but the recent discussions I had offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4

See lots of old drifts at flea market tables. The vendors
never know what they are.

Removing a Morse Taper Tool - 33 Seconds or Less
 

In article , "Leon" wrote:

"Gerald Ross" wrote in message
m...
Joe AutoDrill wrote:
Thought this might be useful for some here. I believe I put this out
there
before for all to see a while back, but the recent discussions I had
offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4


Good tip if you have an industrial DP, but my old Delta and my new Ridgid
neither have a slot for such a tool.


Bummer. My new Delta came with the slot and the tool, IIRC my old Rockwell
did too.


The tip was good for one thing, at least: a box of miscellaneous tools-n-stuff
that I bought at an auction a couple years ago had one of those tools in it.

Now I know what it's for.

Removing a Morse Taper Tool - 33 Seconds or Less
 

"Doug Miller" wrote in message
...
In article , "Leon"
wrote:

"Gerald Ross" wrote in message
om...
Joe AutoDrill wrote:
Thought this might be useful for some here. I believe I put this out
there
before for all to see a while back, but the recent discussions I had
offline
with someone in another forum made me think others here might find it
useful.

http://www.youtube.com/watch?v=rJ3jyEbcse4


Good tip if you have an industrial DP, but my old Delta and my new
Ridgid
neither have a slot for such a tool.


Bummer. My new Delta came with the slot and the tool, IIRC my old
Rockwell
did too.


The tip was good for one thing, at least: a box of miscellaneous
tools-n-stuff
that I bought at an auction a couple years ago had one of those tools in
it.

Now I know what it's for.

Simple but damn handy.