Anyone know a supplier of medium to large hole saw bits that are carbide
equipped for production use? I have a customer looking for custom tooling
for 2" to 5" hole sizes and would love to point them in the direction of a
"recommended" supplier rather than a Googled supplier.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://tinyurl.com/AutoDrill-Facebook

V8013-R

We are.

Emily
Carbide Processors, Inc.
www.carbideprocessors.com
800 346-8274

They aren't up on our web site yet because we don't have a standard
product line. These are all custom for industry.

Tom Walz


On Feb 2, 6:39*am, "Joe AutoDrill" wrote:
Anyone know a supplier of medium to large hole saw bits that are carbide
equipped for production use? *I have a customer looking for custom tooling
for 2" to 5" hole sizes and would love to point them in the direction of a
"recommended" supplier rather than a Googled supplier.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills:http://www.AutoDrill.com
Multiple Spindle Drills:http://www.Multi-Drill.com
Production Tapping:http://Production-Tapping-Equipment.com/
Flagship Site:http://www.Drill-N-Tap.com
VIDEOS:http://www.youtube.com/user/AutoDrill
TWITTER:http://twitter.com/AutoDrill
FACEBOOK:http://tinyurl.com/AutoDrill-Facebook

V8013-R

Depending on the size, you might look at these:
http://www.hougen.com/cutters/cutters_index.html
We cut 1 1/2 dia thru 1 1/2" thick A36 in about 20 mins.
Can't remember that last time we bought new ones.
R. Wink

On Wed, 2 Feb 2011 09:39:47 -0500, "Joe AutoDrill"
wrote:

Anyone know a supplier of medium to large hole saw bits that are carbide
equipped for production use? I have a customer looking for custom tooling
for 2" to 5" hole sizes and would love to point them in the direction of a
"recommended" supplier rather than a Googled supplier.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://tinyurl.com/AutoDrill-Facebook

V8013-R

"rwwink" wrote in message
...
Depending on the size, you might look at these:
http://www.hougen.com/cutters/cutters_index.html
We cut 1 1/2 dia thru 1 1/2" thick A36 in about 20 mins.
Can't remember that last time we bought new ones.
R. Wink

Thanks for the excellent tip. I'm familiar with Hougen and Jancy and sent
the customer to Hougen first thing. In fact, check out this video of our
machine drilling a decent size hole through decently thick material. 2"
diameter through 3/4" mild steel.

http://www.youtube.com/watch?v=29oswoasnLQ

The video is only just over a minute long so I'd have to guess it took 40-50
seconds total at most. I'll have to go rewatch it to see.

....It's the "birds nest" of chips that causes us a problem with metal. I'm
not sure how their tooling would work in greenish pine.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Production Tapping: http://Production-Tapping-Equipment.com/
Flagship Site: http://www.Drill-N-Tap.com
VIDEOS: http://www.youtube.com/user/AutoDrill
TWITTER: http://twitter.com/AutoDrill
FACEBOOK: http://tinyurl.com/AutoDrill-Facebook

V8013-R