working with teak
I am planning to build an entertainment center from either mahogany or teak.
I have read that teak is hard on your scraping type tools like a planer or a jointer. I assume this is due to the sand in the teak. Has anyone in this group made something from teak? If so, was the work hard on your scraping tools? Teak would be my first choice but not if I have to sharpen my scraping tools a few times during the project. TIA. Dick Snyder |
working with teak
In article , "Dick Snyder" wrote:
I am planning to build an entertainment center from either mahogany or teak. I have read that teak is hard on your scraping type tools like a planer or a jointer. I assume this is due to the sand in the teak. Not sand, per se, but silicate compounds. Has anyone in this group made something from teak? Yes. If so, was the work hard on your scraping tools? It's hard on *everything*. Plus, it's pretty oily, so it's usually recommended to wipe the surfaces of joints with acetone before applying glue. Teak would be my first choice but not if I have to sharpen my scraping tools a few times during the project. Teak is beautiful wood. So is mahogany. IMHO, teak is a PITA to work with. Mahogany isn't. Quite the contrary IME. |
working with teak
"Doug Miller" wrote in message
... In article , "Dick Snyder" wrote: I am planning to build an entertainment center from either mahogany or teak. I have read that teak is hard on your scraping type tools like a planer or a jointer. I assume this is due to the sand in the teak. Not sand, per se, but silicate compounds. Any idea if carbide tooling deals with the silicate compounds appropriately or if even carbide is affected by them? -- Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill V8013-R |
working with teak
In article , "Joe AutoDrill" wrote:
"Doug Miller" wrote in message ... In article , "Dick Snyder" wrote: I am planning to build an entertainment center from either mahogany or teak. I have read that teak is hard on your scraping type tools like a planer or a jointer. I assume this is due to the sand in the teak. Not sand, per se, but silicate compounds. Any idea if carbide tooling deals with the silicate compounds appropriately or if even carbide is affected by them? Worst case, a carbide saw blade might need resharpening after running a lot of teak. |
working with teak
Any idea if carbide tooling deals with the silicate compounds
appropriately or if even carbide is affected by them? Worst case, a carbide saw blade might need resharpening after running a lot of teak. Interesting. I would have to presume the same thing applies to drilling then. Any other woods have this property to watch out for? Specifically, I'm curious about Ipe (Eepay) and any of the other "rot resistant" woods used in decking, truck floors, etc. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill V8013-R |
working with teak
either mahogany or teak.
Some of the finest furniture ever built was made of mahogany. Some of the finest patio furniture ever built is made of teak. Just my opinion but teak is way way down the beauty scale from mahogany. I've never really considered it a nice material for furniture but rather boat decks and deck chairs. Again, all opinion. Also, mahogany is a dream to work with. |
working with teak
"SonomaProducts.com" writes:
either mahogany or teak. Some of the finest furniture ever built was made of mahogany. Some of the finest patio furniture ever built is made of teak. Just my opinion but teak is way way down the beauty scale from mahogany. I've never really considered it a nice material for furniture but rather boat decks and deck chairs. Again, all opinion. Also, mahogany is a dream to work with. And much less expensive than teak. I just picked up some 4/4 RGH mahogany 8" x 144" for less than USD6 BF (Jackel Hardwoods in watsonville) !Not Luan, either; this is the good stuff. scott |
working with teak
Most decking jobs with Ipe(several different woods) is mostly a
trip to the store for more drill bits and saw blades. I had a contractor friend who built a rather large(1800 sqft) deck and he told me that went through more than $300 in The hardness is quite remarkable. Joe AutoDrill wrote: Any other woods have this property to watch out for? Specifically, I'm curious about Ipe (Eepay) and any of the other "rot resistant" woods used in decking, truck floors, etc. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill V8013-R |
working with teak
The various rose woods contain silicate compounds and are hard to saw
or turn. Some of the resin or shaving - might be hazardous to allergic reactions. Marin Martin H. Eastburn @ home at Lions' Lair with our computer lionslair at consolidated dot net "Our Republic and the Press will Rise or Fall Together": Joseph Pulitzer TSRA: Endowed; NRA LOH & Patron Member, Golden Eagle, Patriot's Medal. NRA Second Amendment Task Force Charter Charter Founder IHMSA and NRA Metallic Silhouette maker & member. http://lufkinced.com/ On 6/9/2010 9:18 AM, Joe AutoDrill wrote: Any idea if carbide tooling deals with the silicate compounds appropriately or if even carbide is affected by them? Worst case, a carbide saw blade might need resharpening after running a lot of teak. Interesting. I would have to presume the same thing applies to drilling then. Any other woods have this property to watch out for? Specifically, I'm curious about Ipe (Eepay) and any of the other "rot resistant" woods used in decking, truck floors, etc. Regards, Joe Agro, Jr. (800) 871-5022 01.908.542.0244 Automatic / Pneumatic Drills: http://www.AutoDrill.com Multiple Spindle Drills: http://www.Multi-Drill.com Production Tapping: http://Production-Tapping-Equipment.com/ Flagship Site: http://www.Drill-N-Tap.com VIDEOS: http://www.youtube.com/user/AutoDrill V8013-R |
All times are GMT +1. The time now is 02:38 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter