Really Dumb idea, Planing PCB?
 

Dear All,

I have to fix a mistake.

I face screwed a cabinet where I shouldn't have, DOH!

The material is pre-finished flat sawn hard maple veneer particle core
board.

It is only one small part I need to cover up, I was thinking about resawing
a piece of 1/8" off of a spare panel, and planing it down as thin as I can
to recover the prefinished veneer and then gluing it onto the side of the
cabinet.

Anyone ever planed particle board?

Thanks,

David.

Every neighbourhood has one, in mine, I'm him.

Remove the "splinter" from my email address to email me.

Newbies, please read this newsgroups FAQ.

rec.ww FAQ http://www.robson.org/woodfaq/
Archives http://groups.google.com/advanced_group_search
Crowbar FAQ http://www.klownhammer.org/crowbar

Really Dumb idea, Planing PCB?
 

Thickness sander.

--
Think thrice, measure twice and cut once.

Sanding is like paying taxes ... everyone has to do it, but it is
important to take steps to minimize it.

There is only one period and no underscores in the real email address.



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Really Dumb idea, Planing PCB?
 

David,
It's hard on blades but planes OK,

What about a plug?

Dave


"David F. Eisan" wrote in message
.cable.rogers.com...
Dear All,

I have to fix a mistake.

I face screwed a cabinet where I shouldn't have, DOH!

The material is pre-finished flat sawn hard maple veneer particle core
board.

It is only one small part I need to cover up, I was thinking about
resawing
a piece of 1/8" off of a spare panel, and planing it down as thin as I can
to recover the prefinished veneer and then gluing it onto the side of the
cabinet.

Anyone ever planed particle board?

Thanks,

David.

Every neighbourhood has one, in mine, I'm him.

Remove the "splinter" from my email address to email me.

Newbies, please read this newsgroups FAQ.

rec.ww FAQ http://www.robson.org/woodfaq/
Archives http://groups.google.com/advanced_group_search
Crowbar FAQ http://www.klownhammer.org/crowbar






----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---

Really Dumb idea, Planing PCB?
 

"David F. Eisan" wrote in message
I face screwed a cabinet where I shouldn't have, DOH!

The material is pre-finished flat sawn hard maple veneer particle core
board.

I'd consider making plugs. I'd even drill a couple of more holes if I had
to in order to balance out the appearance. Plugs will be very subtle and
people will think they belong there.

I'd be afraid to plane something like that. One tiny ooops and you start
over.
Ed

http://pages.cthome.net/edhome