DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Woodworking (https://www.diybanter.com/woodworking/)
-   -   Oak for trade (https://www.diybanter.com/woodworking/297888-oak-trade.html)

Larry[_7_] February 9th 10 12:51 AM

Oak for trade
 
I aquired some oak (don't know what kind) over the weekend and
don't have any use for it but I hate to see it go to waste. I
have 5 pieces total. List below...

1pc - 3 3/4 x 7 x 30
2pc - 3 1/2 x 7 x 42
2pc - 3 x 3 x 40

These are not perfect but I'm sure you could get 4 "large" legs,
or perhaps a table pedastal out of them. Anyone in the DFW area
interested in trading? I'll entertain anything worthwhile,
tools, other hardwoods, etc. Make me an offer.

Larry


Doug Miller February 9th 10 03:11 AM

Oak for trade
 
In article , Larry wrote:
I aquired some oak (don't know what kind) over the weekend


Nobody really cares much about the exact species, only whether it's red oak or
white oak. Every red oak species has pretty much the same physical
characteristics and appearance as every other; ditto white oak.

How to tell the difference, method 1: wet the end of a board, and smell it.
Wet white oak smells like vanilla and toast. Wet red oak smells like cat ****.

How to tell the difference, method 2: look at the end of a board. Red oak has
visible open pores. White oak does not.

How to tell the difference, method 3: suck on the end of a board like it was a
soda straw. You can draw air through red oak, but not through white.


Larry[_7_] February 9th 10 03:35 AM

Oak for trade
 
(Doug Miller) wrote in
:

In article , Larry
wrote:
I aquired some oak (don't know what kind) over the weekend


Nobody really cares much about the exact species, only
whether it's red oak or white oak. Every red oak species
has pretty much the same physical characteristics and
appearance as every other; ditto white oak.

How to tell the difference, method 1: wet the end of a
board, and smell it. Wet white oak smells like vanilla and
toast. Wet red oak smells like cat ****.


Not sure I know what cat **** smell like. I have dogs...


How to tell the difference, method 2: look at the end of a
board. Red oak has visible open pores. White oak does not.


This seems the most desirable method.


How to tell the difference, method 3: suck on the end of a
board like it was a soda straw. You can draw air through
red oak, but not through white.


Can't see myself sucking on the end of a board either while my
wife's laughing her ass off.

I see if I can figure it out and add the info to the original
post.

Larry



All times are GMT +1. The time now is 09:54 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter