Dangerous Strippers in shop
 

Time for a good LOL

Some time ago my brother had to strip some furniture for his wife so
off to the shop we go. My brother never having stripped a thing in his
life pulls out a back pack with some cloth coveralls, gloves and some
goggles in it.
He proceeds to suit up and starts applying the stripper. He was
having a hard time using the stripper out of the can so I gave him a
paint try to use. And away he went. He was not doing badly at all so I
left him on his own because I had some plans to go over for Monday.
While going over the plans I could not read some of my business
partner's site measurements so I called him and tried to get some
answers. He had no idea what I was trying to figure out. He then asked
me. What I was doing in the shop on a Saturday night? I told him I was
there with my brother and he was doing some stripping and that I
figured I would get a jump on Mondays work. Never having met my
brother before he said he would come down to the shop and we could
figure the plans out and meet my brother at the same time.
About 30 minuets later I hear my brother out back yelling about
something. As I open the door to the shop my brother is jumping up and
down and running around in just his underwear. I asked him what
happened and he told me that he had sat in the paint try of stripper
on accident. Just then the back door opens and my business partner
comes in and looks at my brother first and then me and says "I did not
know you were doing that type of stripping"
After my brother got cleaned up and dressed we all went into the
office. I then called my wife and told her I would be later than
expected. We then all sat down and had a good laugh about "the
stripper in the shop" and had a few beers. About 45 minuets later my
partner's wife, my brother's wife and my wife showed up at the shop
mad as hell demanding to go in the shop because they knew we were not
working and we had a stripper out back.
I guess I had not hung up the phone properly and my wife heard our
conversation and assumed the worst. Then she got on the phone to the
other wives and they all decided to come down at the same time to
catch us in the act. (We all live within a few blocks of each other by
the way)
So the moral of the story is be careful of strippers in the shop.

Thanks: Chris

Dangerous Strippers in shop
 

Really enjoyed the story!!! :O) :O)

Keith P

Dangerous Strippers in shop
 

Chris wrote:
story snipped
So the moral of the story is be careful of strippers in the shop.

Well, yeah, you could get distracted and lose a finger
in the table saw or something . . . which is what I
expected this post to be about from the header.

Bill Ranck
Blacksburg, Va.

Dangerous Strippers in shop
 

Dangerous Strippers in shop
 

wrote:

Chris wrote:
story snipped
So the moral of the story is be careful of strippers in the shop.

Well, yeah, you could get distracted and lose a finger
in the table saw or something . . . which is what I
expected this post to be about from the header.

They'll wiggle and jiggle until you run out of money, and then they'll take
you by the hand, wiggle at you some more, then dump you outside on the curb
with a cry of "There's an ATM across the street. Come back when you have
more money!"

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

Dangerous Strippers in shop
 

Dangerous Strippers in shop
 

On 24 Mar 2004 05:12:16 -0800, (Conan the Librarian)
wrote:

You know, I used to fret over taking a file to the mouth of a plane
until I read Larry Williams' (planemaker extraordinaire, Paddy)
description of fettling (you know what that means, Jeff) a smoother to
get the best possible performance out of it. He describes taking a
file to touch up the leading edge of the mouth to ensure it's
perfectly square and has no little bits of metal that might preclude
you closing the mouth up super-tight.

Web site? Book? Would you please provide a reference for Larry
Williams' writings?

Cape Cod Bob
Visit my web site at http://home.comcast.net/~bobmethelis

Dangerous Strippers in shop
 

Silvan wrote:
wrote:

Well, yeah, you could get distracted and lose a finger
in the table saw or something . . . which is what I

They'll wiggle and jiggle until you run out of money, and then they'll take
you by the hand, wiggle at you some more, then dump you outside on the curb
with a cry of "There's an ATM across the street. Come back when you have
more money!"

That's OK, my wife just opened a chocolate shop a few months
ago and we used the "There's an ATM across the street" line on
lots of women before we got the credit card machine in place.
Worked, too. ;-)

Bill Ranck
Blacksburg, Va.

Dangerous Strippers in shop
 

On Wed, 24 Mar 2004 16:25:25 +0000 (UTC), wrote:

That's OK, my wife just opened a chocolate shop a few months
ago

Are any local churches or the mayor trying to run you out of town?
G

Barry

Dangerous Strippers in shop
 

B a r r y wrote:
On Wed, 24 Mar 2004 16:25:25 +0000 (UTC), wrote:

That's OK, my wife just opened a chocolate shop a few months
ago

Are any local churches or the mayor trying to run you out of town?

No, but I'm keeping my eye out for any Irish Gyspsies that
might show up.

Bill Ranck
Blacksburg, Va.

Dangerous Strippers in shop
 

wrote:

That's OK, my wife just opened a chocolate shop a few months
ago and we used the "There's an ATM across the street" line on
lots of women before we got the credit card machine in place.
Worked, too. ;-)

Remind me NOT to send SWMBO to Blacksburg anytime soon.

Where is this place, so I can keep blinders on her whenever she's near it?

(Yeah, like I could keep her from smelling it. :)

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

Dangerous Strippers in shop
 

That's why you won't find strippers in a woodshop. Woodworkers don't have
any money left.

--
Bill Pounds
http://www.billpounds.com/woodshop


"Silvan" wrote in message
...
wrote:

They'll wiggle and jiggle until you run out of money, and then they'll
take
you by the hand, wiggle at you some more, then dump you outside on the
curb
with a cry of "There's an ATM across the street. Come back when you have
more money!"

Dangerous Strippers in shop
 

Pounds on Wood wrote:

That's why you won't find strippers in a woodshop. Woodworkers don't have
any money left.

That's right. We're too jaded also. "Yeah, those look nice and stuff, but
I'm trying to apply this shellac and you're blocking my light."

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

Dangerous Strippers in shop
 

Silvan writes:

That's why you won't find strippers in a woodshop. Woodworkers don't have
any money left.

That's right. We're too jaded also. "Yeah, those look nice and stuff, but
I'm trying to apply this shellac and you're blocking my light."

You just need to find one who can get the tassles going in different
directions.

Charlie Self
"Laws are like sausages, it is better not to see them being made." Otto von
Bismarck

Dangerous Strippers in shop
 

Cape Cod Bob wrote in message . ..

Web site? Book? Would you please provide a reference for Larry
Williams' writings?

Larry Williams is half of the planemaking team of Clark & Williams
(http://www.planemaker.com/). They make truly outstanding wooden
planes the old-fashioned way. (No affiliation, I just own one of
their smoothers and it is quite possibly the nicest plane I've ever
used, both functionally and aesthetically.)

I forget where I read Larry's take on finetuning a smoother, but I
know he has been a longtime contributor to the Oldtools list. (You
can check out the archives at
http://www.frontier.iarc.uaf.edu/~cswingle/archive/) He also has some
technique articles on his website.


Chuck Vance

Dangerous Strippers in shop
 

Silvan wrote:
wrote:

That's OK, my wife just opened a chocolate shop a few months

Remind me NOT to send SWMBO to Blacksburg anytime soon.

Heh, heh, heh . . .

Where is this place, so I can keep blinders on her whenever she's near it?

If she ever goes to the Blacksburg Farmer's Market, she'll find it.

Bill Ranck
Blacksburg, Va.

Dangerous Strippers in shop
 

wrote:

Where is this place, so I can keep blinders on her whenever she's near
it?

If she ever goes to the Blacksburg Farmer's Market, she'll find it.

Aw crap. :)

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

Dangerous Strippers in shop
 

Charlie Self wrote:

That's right. We're too jaded also. "Yeah, those look nice and stuff,
but I'm trying to apply this shellac and you're blocking my light."

You just need to find one who can get the tassles going in different
directions.

Nah. She'd just be a man hating ice princess like all the rest of them.

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

Dangerous Strippers in shop
 

Silvan writes:

That's right. We're too jaded also. "Yeah, those look nice and stuff,
but I'm trying to apply this shellac and you're blocking my light."

You just need to find one who can get the tassles going in different
directions.

Nah. She'd just be a man hating ice princess like all the rest of them.

Life experiences differ.

Charlie Self
"Confronted with the choice, the American people would choose the policeman's
truncheon over the anarchist's bomb." Spiro T. Agnew

Dangerous Strippers in shop
 

"Conan the Librarian" wrote in message ...
I forget where I read Larry's take on finetuning a smoother, but I
know he has been a longtime contributor to the Oldtools list. (You
can check out the archives at
http://www.frontier.iarc.uaf.edu/~cswingle/archive/) He also has some
technique articles on his website.


Chuck, thanks for posting that link. I read up on the grinding of chisels
and plane irons section and was pleased to find that a grey wheel is still
recommended for rough grinding. I'd almost let the village whisperers
convince me that I *had* to have a white or pink wheel, but I have always
got by with a mix of grey carborundum wheels and water stones (being careful
with the heat, obviously).

I'll read some more later.

Greg