Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
How would you have done it?
I installed a overhead storage shelf made by Hyloft
(see item he http://www.amazon.com/HyLoft-540-45-...ef=pd_sim_hi_4 ) Need to make sure the corners were parallel to one another. They suggested hanging one then measure off it to get to line up. My brother and I struggled a bit to do that. We got it done, but the hardest part I thought was how do you hang something parallel in middle of a garage/workshop ceiling? No reference points within 5 feet of any one direction. We did it with careful measuring. I thought later we should have just made a template out of cardboard and just done it that way. The brackets have to line up on a joist. The job was way too long for what should have been a 20 minute deal. Like to do it again, buy since my brother is leaving to go home this weekend, it will have to be a solo effort. MJ |
#2
Posted to rec.woodworking
|
|||
|
|||
How would you have done it?
My first thought would be to assemble it on the floor lift it up into
place. Some cargo straps and Lumb-R-Grip Hanger Hooks would do the job for an open ceiling. For a drywall ceiling, you could use some cheap screw-in hooks. -- -MIKE- "Playing is not something I do at night, it's my function in life" --Elvin Jones (1927-2004) -- http://mikedrums.com ---remove "DOT" ^^^^ to reply |
#3
Posted to rec.woodworking
|
|||
|
|||
How would you have done it?
wrote in message ... I installed a overhead storage shelf made by Hyloft (see item he http://www.amazon.com/HyLoft-540-45-...ef=pd_sim_hi_4 ) Need to make sure the corners were parallel to one another. They suggested hanging one then measure off it to get to line up. My brother and I struggled a bit to do that. We got it done, but the hardest part I thought was how do you hang something parallel in middle of a garage/workshop ceiling? No reference points within 5 feet of any one direction. We did it with careful measuring. I thought later we should have just made a template out of cardboard and just done it that way. The brackets have to line up on a joist. The job was way too long for what should have been a 20 minute deal. Like to do it again, buy since my brother is leaving to go home this weekend, it will have to be a solo effort. MJ Install like a garage door opener. Attach one element and swing the other end up and attach. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|