Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
It looks like we are going to have to a large horse chestnut tree
taken out. Is the wood good for anything? If so, who might want it? The trunk is about 2-3 feet across near the bottom. It looks like there might be some interesting burl-like pieces in several places. |
#3
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
Steve Turner wrote:
wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? The trunk is about 2-3 feet across near the bottom. It looks like there might be some interesting burl-like pieces in several places. None of the tree books I have that describe Horsechestnut say anything about the properties of the lumber, but they do say that it's an "introduced" member of the Buckeye family, native to Asia and southeastern Europe. However, "The Encyclopedia of Wood" by the U.S. Department of Agriculture has this to say about Buckeye: ======== Buckeye consists of two species, yellow buckeye (Aesculus octandra) and Ohio buckeye (a. glabra). These species range from the Appalachians of Pennsylvania, Virginia, and North Carolina westward to Kansas, Oklahoma, and Texas. Buckeye is not customarily separated from other species when manufactured into lumber and can be used for the same purposes as aspen (Populus), basswood (Tilia), and sapwood of yellow-poplar (Liriodendron tulipifera). The white sapwood of buckeye merges gradually into the creamy or yellowish white heartwood. The wood is uniform in texture, generally straight grained, light in weight, weak when used as a beam, soft, and low in shock resistance. It is rated low on machinability such as shaping, mortising, boring, and turning. Buckeye is suitable for pulping for paper; in lumber form, it has been used principally for furniture, boxes and crates, food containers, wooden ware, novelties, and planing mill products. ======== Based on all that, I don't think I would bother having it milled... Sounds like it might be good for carving though, depending on how soft it is. You mention Aspen along with Poplar. Poplar is reasonably hard while aspen is much like basswood. |
#4
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
"Steve Turner" wrote:
Department of Agriculture has this to say about Buckeye: Don't know about the DofA definition, but in Ohio a Buckeye is defined as a worthless nut. OSU fans not included.grin Lew |
#5
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On Tue, 17 Mar 2009 03:26:11 GMT, "Lew Hodgett"
wrote: "Steve Turner" wrote: Department of Agriculture has this to say about Buckeye: Don't know about the DofA definition, but in Ohio a Buckeye is defined as a worthless nut. OSU fans not included.grin Lew I'm an OSU graduate and I witnessed plenty of nuts along High Street, especially after beating Michigan in football. Woody Hayes was a nut of another kind, all by himself. The buckeyes are very good for dropping down crawdad holes. |
#6
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
"Phisherman" wrote:
I'm an OSU graduate and I witnessed plenty of nuts along High Street, especially after beating Michigan in football. Woody Hayes was a nut of another kind, all by himself. The buckeyes are very good for dropping down crawdad holes. Have two sons that are both OSU graduates. Love that bumper sticker you see in Columbus: Directions to Ann Arbor, North till you smell it, West till you step in it. If you travelled north west Ohio during football season as I did, you best not go into a restaurant or bar before you found out if it was a Buckeye or Wolverine establishment. They take their college football very seriously. Lew |
#7
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On Mon, 16 Mar 2009 21:57:53 -0500, Steve Turner
wrote: wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? The trunk is about 2-3 feet across near the bottom. It looks like there might be some interesting burl-like pieces in several places. None of the tree books I have that describe Horsechestnut say anything about the properties of the lumber, but they do say that it's an "introduced" member of the Buckeye family, native to Asia and southeastern Europe. However, "The Encyclopedia of Wood" by the U.S. Department of Agriculture has this to say about Buckeye: ======== Buckeye consists of two species, yellow buckeye (Aesculus octandra) and Ohio buckeye (a. glabra). These species range from the Appalachians of Pennsylvania, Virginia, and North Carolina westward to Kansas, Oklahoma, and Texas. Buckeye is not customarily separated from other species when manufactured into lumber and can be used for the same purposes as aspen (Populus), basswood (Tilia), and sapwood of yellow-poplar (Liriodendron tulipifera). The white sapwood of buckeye merges gradually into the creamy or yellowish white heartwood. The wood is uniform in texture, generally straight grained, light in weight, weak when used as a beam, soft, and low in shock resistance. It is rated low on machinability such as shaping, mortising, boring, and turning. Buckeye is suitable for pulping for paper; in lumber form, it has been used principally for furniture, boxes and crates, food containers, wooden ware, novelties, and planing mill products. ======== Based on all that, I don't think I would bother having it milled... I don't want it myself. I used to do a little woodworking, but not anymore. I just thought I'd see if is worth offering it to anyone. It sounds like it is too soft for most uses. |
#8
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On Mar 17, 3:14*am, wrote:
On Mon, 16 Mar 2009 21:57:53 -0500, Steve Turner wrote: wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? The trunk is about 2-3 feet across near the bottom. It looks like there might be some interesting burl-like pieces in several places. None of the tree books I have that describe Horsechestnut say anything about the properties of the lumber, but they do say that it's an "introduced" member of the Buckeye family, native to Asia and southeastern Europe. *However, "The Encyclopedia of Wood" by the U.S. Department of Agriculture has this to say about Buckeye: ======== Buckeye consists of two species, yellow buckeye (Aesculus octandra) and Ohio buckeye (a. glabra). *These species range from the Appalachians of Pennsylvania, Virginia, and North Carolina westward to Kansas, Oklahoma, and Texas. *Buckeye is not customarily separated from other species when manufactured into lumber and can be used for the same purposes as aspen (Populus), basswood (Tilia), and sapwood of yellow-poplar (Liriodendron tulipifera). The white sapwood of buckeye merges gradually into the creamy or yellowish white heartwood. *The wood is uniform in texture, generally straight grained, light in weight, weak when used as a beam, soft, and low in shock resistance. *It is rated low on machinability such as shaping, mortising, boring, and turning. Buckeye is suitable for pulping for paper; in lumber form, it has been used principally for furniture, boxes and crates, food containers, wooden ware, novelties, and planing mill products. ======== Based on all that, I don't think I would bother having it milled... I don't want it myself. I used to do a little woodworking, but not anymore. I just thought I'd see if is worth offering it to anyone. It sounds like it is too soft for most uses. I'm on here late, but as far as I can tell, almost no wood is too soft or too hard but what some woodworker can't use it for something, even if it's firewood in the stove. I've got bits of an old Chinese chestnut here that are good for turning, eventually, and two friends who are good turners. Check around locally for people you know who are woodworkers. If you can't find any, check the shop teachers at your local HS for some names. |
#9
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On Thu, 26 Mar 2009 12:28:39 -0700 (PDT), Charlie Self
wrote: On Mar 17, 3:14*am, wrote: On Mon, 16 Mar 2009 21:57:53 -0500, Steve Turner wrote: wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? The trunk is about 2-3 feet across near the bottom. It looks like there might be some interesting burl-like pieces in several places. None of the tree books I have that describe Horsechestnut say anything about the properties of the lumber, but they do say that it's an "introduced" member of the Buckeye family, native to Asia and southeastern Europe. *However, "The Encyclopedia of Wood" by the U.S. Department of Agriculture has this to say about Buckeye: ======== Buckeye consists of two species, yellow buckeye (Aesculus octandra) and Ohio buckeye (a. glabra). *These species range from the Appalachians of Pennsylvania, Virginia, and North Carolina westward to Kansas, Oklahoma, and Texas. *Buckeye is not customarily separated from other species when manufactured into lumber and can be used for the same purposes as aspen (Populus), basswood (Tilia), and sapwood of yellow-poplar (Liriodendron tulipifera). The white sapwood of buckeye merges gradually into the creamy or yellowish white heartwood. *The wood is uniform in texture, generally straight grained, light in weight, weak when used as a beam, soft, and low in shock resistance. *It is rated low on machinability such as shaping, mortising, boring, and turning. Buckeye is suitable for pulping for paper; in lumber form, it has been used principally for furniture, boxes and crates, food containers, wooden ware, novelties, and planing mill products. ======== Based on all that, I don't think I would bother having it milled... I don't want it myself. I used to do a little woodworking, but not anymore. I just thought I'd see if is worth offering it to anyone. It sounds like it is too soft for most uses. I'm on here late, but as far as I can tell, almost no wood is too soft or too hard but what some woodworker can't use it for something, even if it's firewood in the stove. I've got bits of an old Chinese chestnut here that are good for turning, eventually, and two friends who are good turners. Check around locally for people you know who are woodworkers. If you can't find any, check the shop teachers at your local HS for some names. I wish I had thought of the local high schools. Too late now. It's all gone to the chipper. It might not have been much good anyway. The reason we had to take it out was that it had serious root damage and started leaning. The tree guy showed me some of the cross sections. The damaged wood went pretty far in. He said the tree had been badly pruned for many years. |
#10
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
|
#11
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
|
#12
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
|
#13
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On Tue, 17 Mar 2009 13:29:55 GMT, (Doug Miller)
wrote: In article , wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? I've never done any woodworking with it -- but it makes *damn* good firewood. If you're anywhere near Indianapolis, I'd be happy to take it for that purpose. About 2,000 miles away ;-) We're not allowed to burn anything in fireplaces around here. :-( |
#14
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
Maybe you can buy some carbon credits from some third world country
that has a good allocation from the new world government but has no infrastructure yet to generate much carbon on their own. Zimbabwai or Nambia come to mind, they could use the cash. Oh wait, Obama hasn't had his cap-and-trade and world government budget passed yet. Maybe next year. On Mar 17, 9:50*am, wrote: On Tue, 17 Mar 2009 13:29:55 GMT, (Doug Miller) wrote: In article , wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? I've never done any woodworking with it -- but it makes *damn* good firewood. If you're anywhere near Indianapolis, I'd be happy to take it for that purpose. About 2,000 miles away ;-) We're not allowed to burn anything in fireplaces around here. :-( |
#15
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On Tue, 17 Mar 2009 10:01:36 -0700 (PDT), "SonomaProducts.com"
wrote: Maybe you can buy some carbon credits from some third world country that has a good allocation from the new world government but has no infrastructure yet to generate much carbon on their own. Zimbabwai or Nambia come to mind, they could use the cash. Oh wait, Obama hasn't had his cap-and-trade and world government budget passed yet. Maybe next year. And your plan is what? I suppose you would have voted for Bush again. |
#16
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
Nucular Reaction wrote:
On Tue, 17 Mar 2009 10:01:36 -0700 (PDT), "SonomaProducts.com" wrote: Maybe you can buy some carbon credits from some third world country that has a good allocation from the new world government but has no infrastructure yet to generate much carbon on their own. Zimbabwai or Nambia come to mind, they could use the cash. Oh wait, Obama hasn't had his cap-and-trade and world government budget passed yet. Maybe next year. And your plan is what? I suppose you would have voted for Bush again. My plan is to agree with everything Obama says or does because thank God he isn't Bush. Yep, that's my plan.... -- Any given amount of traffic flow, no matter how sparse, will expand to fill all available lanes. To reply, eat the taco. http://www.flickr.com/photos/bbqboyee/ |
#17
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
I am not a Bush defender, I am a tax hater and a liberty lover.
I think it really sucks that governments just pick a thing and tax it. This cap-and-trade crap will tax our industries into the ground while China and others not only keep freely trashing our planet but also sell credits from the regions of wasteland where they haven't developed any industry yet. Maybe our government will start taxing the generation of sawdust of various species because until we woodworkers liberate it from it's storage in a board where it is safely compressed and kept from becoming an irritant to some people it is of no harm. But once we have expanded it into sawdust, we should pay a tax to offset the cost to society for our injurious behavior. On Mar 17, 1:52*pm, Nucular Reaction wrote: On Tue, 17 Mar 2009 10:01:36 -0700 (PDT), "SonomaProducts.com" wrote: Maybe you can buy some carbon credits from some third world country that has a good allocation from the new world government but has no infrastructure yet to generate much carbon on their own. Zimbabwai or Nambia come to mind, they could use the cash. Oh wait, Obama hasn't had his cap-and-trade and world government budget passed yet. Maybe next year. And your plan is what? I suppose you would have voted for Bush again. |
#18
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
In article , wrote:
On Tue, 17 Mar 2009 13:29:55 GMT, (Doug Miller) wrote: In article , wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? I've never done any woodworking with it -- but it makes *damn* good firewood. If you're anywhere near Indianapolis, I'd be happy to take it for that purpose. About 2,000 miles away ;-) Too far for me to bother bringing a trailer, I guess. g We're not allowed to burn anything in fireplaces around here. :-( People's Republic of California? |
#19
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
(Doug Miller) writes:
In article , wrote: On Tue, 17 Mar 2009 13:29:55 GMT, (Doug Miller) wrote: In article , wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? I've never done any woodworking with it -- but it makes *damn* good firewood. If you're anywhere near Indianapolis, I'd be happy to take it for that purpose. About 2,000 miles away ;-) Too far for me to bother bringing a trailer, I guess. g We're not allowed to burn anything in fireplaces around here. :-( People's Republic of California? Fires and fireplaces are legal in California. Some municipalities no longer allow fireplaces in new construction (but that's not state-wide) and some areas forbid burning on nights when there is an inversion layer (10 or so nights per winter) (also not state-wide). soctt |
#20
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
"Scott Lurndal" wrote:
Fires and fireplaces are legal in California. Some municipalities no longer allow fireplaces in new construction (but that's not state-wide) and some areas forbid burning on nights when there is an inversion layer (10 or so nights per winter) (also not state-wide). An even larger threat is posed by the possibility of an errant spark during fire season. You can have a 10,000 acre brush fire in a heart beat, especially if the winds are blowing. Lew |
#21
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
Common Uses
Baskets Boxes and crates Broom handles Brush backs & handles Brush backs & handles Building materials Cabinetmaking Carvings Decorative plywood Flooring Food containers Furniture Handles: general Interior construction Interior trim Moldings Plywood Pulp/Paper products Sporting Goods Tables Textile equipment Toys Turnery Veneer Veneer: decorative Easy to saw, very easy to glue. Good results in Moulding. Very Stable. Easy to work with hand tools. Fair to good results with turning or some report easy. That is a good idea. wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? The trunk is about 2-3 feet across near the bottom. It looks like there might be some interesting burl-like pieces in several places. |
#22
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On Mar 17, 11:57*pm, "Martin H. Eastburn"
wrote: Common Uses Baskets Boxes and crates Broom handles Brush backs & handles Brush backs & handles Building materials Cabinetmaking Carvings Decorative plywood Flooring Food containers Furniture Handles: general Interior construction Interior trim Moldings Plywood Pulp/Paper products Sporting Goods Tables Textile equipment Toys Turnery Veneer Veneer: decorative Easy to saw, very easy to glue. Good results in Moulding. *Very Stable. Easy to work with hand tools. Fair to good results with turning or some report easy. That is a good idea. wrote: It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? If so, who might want it? The trunk is about 2-3 feet across near the bottom. It looks like there might be some interesting burl-like pieces in several places. A LOT like poplar. Watch the bugs. |
#23
Posted to rec.woodworking
|
|||
|
|||
Is horse chestnut wood good for anything?
On 17 Mar, 01:05, wrote:
It looks like we are going to have to a large horse chestnut tree taken out. Is the wood good for anything? Sweet chestnut yes, horse chestnut not so good. It's OK. It's not terrible, but it's not good either. It's usable for most things, but there's always something that's better suited, better looking, or better lasting. You'd use it if you have it, but you wouldn't seek it out. It's also a bit variable and much depends on your individual tree. (I'm in the UK, your local climate and species might change this) As to carving it, I'd expect it to be workable but quite hard going. It's certainly not basswood. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
American Chestnut | Woodworking | |||
Horse power, horse hockey | Woodworking | |||
Turning Chestnut | Woodturning | |||
Chestnut on the way back?? | Woodworking |