Home |
Search |
Today's Posts |
![]() |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to rec.woodworking
|
|||
|
|||
![]()
Am building a two drawer lateral filing cabinet with the drawers 36"
long and 18" front to back. At present plan to use 18" full extension slides rated at 100 lbs. Can I stay with the 100 lbs. slides or would it be better to upgrade to !50 lbs. slides. Would prefer to use the 100 lbs. slides because they are $30.00 cheaper per drawer. Have never built anything with drawers that long and would rather be safe than sorry. All advice is welcome. Thanks. Vic |
#2
![]()
Posted to rec.woodworking
|
|||
|
|||
![]()
Victor wrote:
Am building a two drawer lateral filing cabinet with the drawers 36" long and 18" front to back. At present plan to use 18" full extension slides rated at 100 lbs. Can I stay with the 100 lbs. slides or would it be better to upgrade to !50 lbs. slides. Would prefer to use the 100 lbs. slides because they are $30.00 cheaper per drawer. Have never built anything with drawers that long and would rather be safe than sorry. All advice is welcome. Thanks. Vic It really all depends on what you are going to file. If you plan on filling it with legal briefs or the like, go for the 150 and 200 if you can find them. If it is for home use, the 100 should be good. Deb |
#3
![]()
Posted to rec.woodworking
|
|||
|
|||
![]()
Let's see. Copy paper weighs about 5# per ream and occupies about
0.1 cu-ft. So a block of solid paper would weigh 50 #/cu-ft. Your drawers (assuming a height of 8.5") have a capacity of about 3.2 cu-ft. So, worst cast, the maximum weight if you pack it rock solid with paper would be about 160#. In reality you would likely be far lighter than this but how much is your call. None of the above applies if you fill the drawer with gold ingots! Art "Victor" wrote in message ... Am building a two drawer lateral filing cabinet with the drawers 36" long and 18" front to back. At present plan to use 18" full extension slides rated at 100 lbs. Can I stay with the 100 lbs. slides or would it be better to upgrade to !50 lbs. slides. Would prefer to use the 100 lbs. slides because they are $30.00 cheaper per drawer. Have never built anything with drawers that long and would rather be safe than sorry. All advice is welcome. Thanks. Vic |
#4
![]()
Posted to rec.woodworking
|
|||
|
|||
![]()
Victor wrote:
Am building a two drawer lateral filing cabinet with the drawers 36" long and 18" front to back. At present plan to use 18" full extension slides rated at 100 lbs. Can I stay with the 100 lbs. slides or would it be better to upgrade to !50 lbs. slides. Would prefer to use the 100 lbs. slides because they are $30.00 cheaper per drawer. Have never built anything with drawers that long and would rather be safe than sorry. All advice is welcome. Thanks. Vic I built a cabinet like that for my wife but 30". I used 100# rated slides, NP. I doubt there would be one with your 36" box. One thing...a free standing lateral file cabinet has a burning desire to tip. Especially when the top drawer is extended. It *will* tip if both drawers are extended. There are various way to fix it one being a cleat fastened to the floor or wall which retains one on the cabinet. -- dadiOH ____________________________ dadiOH's dandies v3.06... ....a help file of info about MP3s, recording from LP/cassette and tips & tricks on this and that. Get it at http://mysite.verizon.net/xico |
#5
![]()
Posted to rec.woodworking
|
|||
|
|||
![]() "dadiOH" wrote in message news:gcN6k.16187 I built a cabinet like that for my wife but 30". I used 100# rated slides, NP. I doubt there would be one with your 36" box. http://www.leevalley.com/hardware/pa...=3,43614,43616 And of course, the biggest problem to keep in mind with parallel drawer filing cabinets is too much weight or too many extended drawers causes the unit to tip over on you making for a really bad day. |
#6
![]()
Posted to rec.woodworking
|
|||
|
|||
![]() "dadiOH" wrote: One thing...a free standing lateral file cabinet has a burning desire to tip. Especially when the top drawer is extended. It *will* tip if both drawers are extended. There are various way to fix it one being a cleat fastened to the floor or wall which retains one on the cabinet. SFWIW, have several commercial metal lateral files. They all are two high units and have an interlock that only allows one drawer at a time to be open. Lew |
#7
![]()
Posted to rec.woodworking
|
|||
|
|||
![]()
The commercial wood file cabinets in our office use Knap Vogt slides with
interlocks. Link: http://www.knapeandvogt.com/8500T_He...e =details.28 "Lew Hodgett" wrote in message news:jOR6k.30$cv5.14@trnddc01... "dadiOH" wrote: One thing...a free standing lateral file cabinet has a burning desire to tip. Especially when the top drawer is extended. It *will* tip if both drawers are extended. There are various way to fix it one being a cleat fastened to the floor or wall which retains one on the cabinet. SFWIW, have several commercial metal lateral files. They all are two high units and have an interlock that only allows one drawer at a time to be open. Lew |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Filing cabinet lock issue | UK diy | |||
Drawer slides | Woodworking | |||
Help with filing cabinet lock/key combination | UK diy | |||
Bisley Filing Cabinet | UK diy | |||
How to clean up an old hardwood filing cabinet? | UK diy |