DeWalt
 

DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.

DeWalt
 

Improveyourlife wrote:
DEWALT built high torque motor delivers 500 in-lbs of maximum
torque.
XRP extended run-time batteries provide long run-time & battery
life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.

Leaving aside the fact that XRP is being discontinued in favor of
lithium ion, is there a point to this post or are you just so happy
with your new drill that you had to share?

--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)

DeWalt
 

My HF SDS Hammer Drill will whip the DeWalt's ass. I thought my
Milwaukee HD was good, till I tried the HF. 3/4" SDS bit Goes through 5"
heavy ag concrete in 5 sec. Excellent isolation; Virtually no vib
transmitted. The Milwaukee took over a minute with similar, but chucked
bit, and buzzed my arm numb.. The SDS chuck is the way to go.
http://www.harborfreight.com/cpi/cta...emnumber=41983
JR
Dweller in the cellar


Improveyourlife wrote:
DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.

--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth
If you're not the lead dog, the view never changes
Doubt yourself, and the real world will eat you alive
The world doesn't revolve around you, it revolves around me
No skeletons in the closet; just decomposing corpses
--------------------------------------------------------------
Dependence is Vulnerability:
--------------------------------------------------------------
"Open the Pod Bay Doors please, Hal"
"I'm sorry, Dave, I'm afraid I can't do that.."

DeWalt
 

On Feb 6, 2:45 am, Improveyourlife wrote:
DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.

Guys
Dont feed the trolls

notice the crosspost
rec.crafts.metalworking, yu.forum.politika, rec.woodworking,
alt.machines.cnc, comp.lang.tcl

Its someone collecting garbage replies

Brent (Crossposts trimmed)

DeWalt
 

Since this has nothing to do with the computer language Tcl, could you
please remove the comp.lang.tcl newsgroup from replies to this thread --
thank you!

JR North wrote:
My HF SDS Hammer Drill will whip the DeWalt's ass. I thought my
Milwaukee HD was good, till I tried the HF. 3/4" SDS bit Goes through 5"
heavy ag concrete in 5 sec. Excellent isolation; Virtually no vib
transmitted. The Milwaukee took over a minute with similar, but chucked
bit, and buzzed my arm numb.. The SDS chuck is the way to go.
http://www.harborfreight.com/cpi/cta...emnumber=41983
JR
Dweller in the cellar


Improveyourlife wrote:
DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.



--
+--------------------------------+---------------------------------------+
| Gerald W. Lester |
|"The man who fights for his ideals is the man who is alive." - Cervantes|
+------------------------------------------------------------------------+

DeWalt
 

On 2008-02-06, Gerald W. Lester wrote:
Since this has nothing to do with the computer language Tcl, could you
please remove the comp.lang.tcl newsgroup from replies to this thread --
thank you!

Wow, there is someone still using Tcl...

i
who stopped using it in 1996 (except with expect)

JR North wrote:
My HF SDS Hammer Drill will whip the DeWalt's ass. I thought my
Milwaukee HD was good, till I tried the HF. 3/4" SDS bit Goes through 5"
heavy ag concrete in 5 sec. Excellent isolation; Virtually no vib
transmitted. The Milwaukee took over a minute with similar, but chucked
bit, and buzzed my arm numb.. The SDS chuck is the way to go.
http://www.harborfreight.com/cpi/cta...emnumber=41983
JR
Dweller in the cellar


Improveyourlife wrote:
DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.

DeWalt
 

On Feb 6, 12:05 pm, JR North wrote:
My HF SDS Hammer Drill will whip the DeWalt's ass.

But will it fit in a Tk toolkit?

DeWalt
 

"Improveyourlife" wrote in message
...
DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.



Dewalt = Black& Decker

DeWalt
 

"Improveyourlife" wrote in message
...
DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.


Grrrrrrr. Yeah, baby. I am aroused. Behave.

DeWalt
 

On Wed, 06 Feb 2008 14:53:51 -0600, "Gerald W. Lester"
wrote:

Since this has nothing to do with the computer language Tcl, could you
please remove the comp.lang.tcl newsgroup from replies to this thread --
thank you!


No.


JR North wrote:
My HF SDS Hammer Drill will whip the DeWalt's ass. I thought my
Milwaukee HD was good, till I tried the HF. 3/4" SDS bit Goes through 5"
heavy ag concrete in 5 sec. Excellent isolation; Virtually no vib
transmitted. The Milwaukee took over a minute with similar, but chucked
bit, and buzzed my arm numb.. The SDS chuck is the way to go.
http://www.harborfreight.com/cpi/cta...emnumber=41983
JR
Dweller in the cellar


Improveyourlife wrote:
DEWALT built high torque motor delivers 500 in-lbs of maximum torque.
XRP extended run-time batteries provide long run-time & battery life.
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm.
Hammerdrill mode 34,000 bpm drills faster holes in masonry
applications. 1/2 in. Metal ratcheting chuck with carbide jaws
prevents bits from slipping. Superior ergonomics provides optimal
balance, comfort and control.