Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
My Shop Vac died on me in the middle of sanding some cabinets tonight, and
I need to finish the project by weeks end. I tried sanding without the vac, but the shop filled with a dust cloud in just a few minutes. So, I need to run to town tomorrow and get a new vac pronto. I need a QUIET vac! I need a vac with a 2-1/2" hose. It should screw, or otherwise lock, into the vac so I can pull the vac around by the hose and not pull the hose out. I need a vac that I can install filter bags in (the usual vac canister filters clog up too quickly with fine dust). I need a vac with a long cord (12' or longer). I need a vac that has built-in storage for the cord and attachments. My current vac is a 12-gallon "quiet series" Shop Vac brand that I've had maybe 3-4 years. I've been happy with it, but I'm a little disappointed that it died so soon. I've read good reviews of the Ridgid WD-1450 that Home Depot sells, but don't know how it would compare with my current vac. Is there a shop vacuum that you recommend that is available at Lowes, Home Depot, or Sears? Like I said, I need it yesterday... I do not have a dust collector. It's on my Christmas list, but the early death of my shop vac may delay that. Thanks, Anthony |
#2
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
Subject
You start with Fein and go down hill from there. Bring your piggy bank. Lew |
#3
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
"HerHusband" wrote in message ... My Shop Vac died on me in the middle of sanding some cabinets tonight, and I need to finish the project by weeks end. I tried sanding without the vac, but the shop filled with a dust cloud in just a few minutes. So, I need to run to town tomorrow and get a new vac pronto. I need a QUIET vac! I need a vac with a 2-1/2" hose. It should screw, or otherwise lock, into the vac so I can pull the vac around by the hose and not pull the hose out. I need a vac that I can install filter bags in (the usual vac canister filters clog up too quickly with fine dust). I need a vac with a long cord (12' or longer). I need a vac that has built-in storage for the cord and attachments. My current vac is a 12-gallon "quiet series" Shop Vac brand that I've had maybe 3-4 years. I've been happy with it, but I'm a little disappointed that it died so soon. I've read good reviews of the Ridgid WD-1450 that Home Depot sells, but don't know how it would compare with my current vac. Is there a shop vacuum that you recommend that is available at Lowes, Home Depot, or Sears? Like I said, I need it yesterday... I do not have a dust collector. It's on my Christmas list, but the early death of my shop vac may delay that. Thanks, Anthony I just replaced my old Shop Vac with a Rigid 1850. I hated the SV, tiny hose, screams line a banshee, tippy. I kept waitng for it to die, which it never did, just got less sucky. Even the garbage vultures wouldn't take it. :-) The Rigid has a tug along hose, tool purse, filter monitor, cart with large wheels, hideous Orange colour, HEPA filter and is somewhat quieter than the SV (lower pitch). The Rigid is only moderately more sucky than the SV, but I've only used it to clean up a water leak so far. I use a DC for all my shop work. As Lew said, a good vac will cost some serious $s, my Rigid was $229 Canadian. It will probably be less in the US. |
#4
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
"HerHusband" wrote My Shop Vac died on me in the middle of sanding some cabinets tonight, and I need to finish the project by weeks end. I tried sanding without the vac, but the shop filled with a dust cloud in just a few minutes. So, I need to run to town tomorrow and get a new vac pronto. Thanks, Anthony Be sure to check this one out. http://tinyurl.com/2scmra Works for me. Max |
#5
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
"HerHusband" wrote in message ... My Shop Vac died on me in the middle of sanding some cabinets tonight, and I need to finish the project by weeks end. I tried sanding without the vac, but the shop filled with a dust cloud in just a few minutes. So, I need to run to town tomorrow and get a new vac pronto. I need a QUIET vac! I need a vac with a 2-1/2" hose. It should screw, or otherwise lock, into the vac so I can pull the vac around by the hose and not pull the hose out. I need a vac that I can install filter bags in (the usual vac canister filters clog up too quickly with fine dust). I need a vac with a long cord (12' or longer). I need a vac that has built-in storage for the cord and attachments. My current vac is a 12-gallon "quiet series" Shop Vac brand that I've had maybe 3-4 years. I've been happy with it, but I'm a little disappointed that it died so soon. I've read good reviews of the Ridgid WD-1450 that Home Depot sells, but don't know how it would compare with my current vac. Is there a shop vacuum that you recommend that is available at Lowes, Home Depot, or Sears? Like I said, I need it yesterday... I do not have a dust collector. It's on my Christmas list, but the early death of my shop vac may delay that. Thanks, Anthony Fein Turbo III. You will hate paying for it. That is the *LAST* thing you will ever hate (or even mildly dislike) about it. jc |
#6
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Mon, 19 Nov 2007 03:09:35 GMT, Joe wrote:
Fein Turbo III. You will hate paying for it. That is the *LAST* thing you will ever hate (or even mildly dislike) about it. Agree 100%. I _love_ mine. Worth every penny. -- Art Greenberg artg at eclipse dot net |
#7
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Sun, 18 Nov 2007 19:44:30 -0600, HerHusband
wrote: My Shop Vac died on me in the middle of sanding some cabinets tonight, and I need to finish the project by weeks end. I tried sanding without the vac, but the shop filled with a dust cloud in just a few minutes. So, I need to run to town tomorrow and get a new vac pronto. I need a QUIET vac! ... I bought a Ridgid with "Scroll Technology" from HD that *might* meet most of your needs. As far as the quietness is concerned, I don't have a lot to compare to, but it's positively silent compared to the old Sears sucker that it replaced. Tom Veatch Wichita, KS USA |
#8
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
Buy the Fein or a Festool shop vac. Five years from now you will still
be satisfied with it. |
#9
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Mon, 19 Nov 2007 05:13:19 -0800 (PST), bookman wrote:
Buy the Fein or a Festool shop vac. Five years from now you will still be satisfied with it. Not a knock on any brand, but 5 years is nothing... I've been waiting for my Craps-man vac to die for over 20 years.. mac Please remove splinters before emailing |
#10
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
mac davis wrote:
On Mon, 19 Nov 2007 05:13:19 -0800 (PST), bookman wrote: Buy the Fein or a Festool shop vac. Five years from now you will still be satisfied with it. Not a knock on any brand, but 5 years is nothing... I've been waiting for my Craps-man vac to die for over 20 years.. I had to get a new one a few years back. My JC Penney finally rusted out. I guess I could have just gotten a barrel and fastened the motor to it but I figured it was time. mac Please remove splinters before emailing -- -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
#11
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Mon, 19 Nov 2007 13:58:45 -0500, "J. Clarke" wrote:
mac davis wrote: On Mon, 19 Nov 2007 05:13:19 -0800 (PST), bookman wrote: Buy the Fein or a Festool shop vac. Five years from now you will still be satisfied with it. Not a knock on any brand, but 5 years is nothing... I've been waiting for my Craps-man vac to die for over 20 years.. I had to get a new one a few years back. My JC Penney finally rusted out. I guess I could have just gotten a barrel and fastened the motor to it but I figured it was time. Lucky you... My vac is just new enough to have the plastic case.. *sigh* mac Please remove splinters before emailing |
#12
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Nov 18, 8:44 pm, HerHusband wrote:
My Shop Vac died on me in the middle of sanding some cabinets tonight, and .... I do not have a dust collector. .. Buy the Harbor Freight Tools Dust Collector instead, the shop vac you described will run you nealry the cost of the HFT (possibly more!) put it on wheels for the time being and put the uctwork for it on your XMAS LIST. |
#13
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
Buy the Harbor Freight Tools Dust Collector instead, the shop vac you
described will run you nealry the cost of the HFT (possibly more!) put it on wheels for the time being and put the uctwork for it on your XMAS LIST. I was considering that option last night too, but came to the conclusion that I use the shop vac for a lot of tasks outside the shop. Vacuuming the cars, cleaning the woodstove, drywall work, spring cleaning the house, remodeling work at my in-laws, etc. Considering the costs, I'm wondering about buying a better shop vac and postponing the dust collector a little longer. My main gripe with this is the better vacs are usually larger, which means less portability. As it is my wife complained about lugging my 12 gallon vac out to clean the cars. It would also be harder to transport a larger vac to work at my in-laws. I'll have to see what I can find locally today, as I don't have the time to wait for a vac to be shipped. Anthony |
#14
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
When I sand with my festool ROM I dont know that the vac is on except
not a bit of dust. Its also a variable speed and turns on then the sander turns on. |
#15
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Mon, 19 Nov 2007 09:04:15 -0600, HerHusband wrote:
Buy the Harbor Freight Tools Dust Collector instead, the shop vac you described will run you nealry the cost of the HFT (possibly more!) put it on wheels for the time being and put the uctwork for it on your XMAS LIST. I was considering that option last night too, but came to the conclusion that I use the shop vac for a lot of tasks outside the shop. Vacuuming the cars, cleaning the woodstove, drywall work, spring cleaning the house, remodeling work at my in-laws, etc. Considering the costs, I'm wondering about buying a better shop vac and postponing the dust collector a little longer. My main gripe with this is the better vacs are usually larger, which means less portability. As it is my wife complained about lugging my 12 gallon vac out to clean the cars. It would also be harder to transport a larger vac to work at my in-laws. I'll have to see what I can find locally today, as I don't have the time to wait for a vac to be shipped. Anthony IMHO, you might consider spending maybe $200 for the harbor "fright" DC and starter kit and picking up a used vac for the other chores at a garage sale.. If the DC is too loud, I added this to mine and quieted it down a LOT.. YMWV http://www.pennstateind.com/store/sup1000.html mac Please remove splinters before emailing |
#16
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Nov 19, 9:04 am, HerHusband wrote:
Buy the Harbor Freight Tools Dust Collector instead, the shop vac you described will run you nealry the cost of the HFT (possibly more!) put it on wheels for the time being and put the uctwork for it on your XMAS LIST. I was considering that option last night too, but came to the conclusion that I use the shop vac for a lot of tasks outside the shop. Vacuuming the cars, cleaning the woodstove, drywall work, spring cleaning the house, remodeling work at my in-laws, etc. Not to mention that for some of my tools, ie miter saw, band saw, and ROS where the hole isn't four inches, the suction of my $250 Harbor Fright DC drops to worse than the shop vac. |
#17
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Tue, 20 Nov 2007 10:07:31 -0800 (PST), "
wrote: Not to mention that for some of my tools, ie miter saw, band saw, and ROS where the hole isn't four inches, the suction of my $250 Harbor Fright DC drops to worse than the shop vac. Strange.. you have any leaks or vac loss? I use a reducer at the lathe and the difference that I see (with the $150 HF DC) is that 4" has lower suction but more volume, where 2 1/2" has more suction and less volume.. I've tried both and for sanding on the lathe the 2 1/2" is easier to get close to the work and will draw the dust further than the 4".. OTOH, I sealed the little DC connecter on my band saw and put a 4" hole in the lower clamshell and it works a lot better now..YMWV mac Please remove splinters before emailing |
#18
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
HerHusband wrote:
My Shop Vac died on me in the middle of sanding some cabinets tonight, and I need to finish the project by weeks end. I tried sanding without the vac, but the shop filled with a dust cloud in just a few minutes. So, I need to run to town tomorrow and get a new vac pronto. I need a QUIET vac! My craftsman is the loudest, ear piercing POS I've ever encountered. I prefer the dust over the noise. |
#19
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
My Shop Vac died on me in the middle of sanding some cabinets tonight
Based on the many positive reviews I've read, I bought a Ridgid WD1450 shop vac this afternoon for $99 (+tax). I haven't had the opportunity to really work it yet, but I did get everything assembled and fired it up for a few tests. Noise Level - Not bad. It's quieter than my "quiet" Shop Vac, though in all fairness that has been sounding a lot louder and unhealthy the past few weeks. I remember being impressed when I bought my old Shop Vac too. I'm sure the WD1450 isn't as quiet as the Fein or Festool machines, but it's only one third the price and it was in stock just a few miles from home. It's certainly quiet enough to use by itself, and I wear ear muffs when using it with other tools like a sander anyway. Suction - Seemed strong, and the 2-1/2" hose was easy to clip on and pull the vac around with. I can't judge it more until I've had a chance to work with it, but it should be more than adequate for my needs. Accessories - I liked the "bucket" on the back of the Shop Vac brand better than the "bag" on the Ridgid WD1450, but I suppose I'll adjust. I generally don't use any of the accessories anyway, other than a brush (not included) and a small nozzle for tight spots. I'll probably keep and use the attachments from my old vac. The WD1450 has a nice 20' cord, though again, I liked the cord hooks on my old Shop Vac better. The cord wraps around the handle on the WD1450, and there doesn't seem to be much to keep it there. Time will tell whether it actually stays in place. The WD1450 has four small casters that make it easier to move in any direction than my old Shop Vac. However, the Shop Vac had big wheels in back that allowed me to pull it up over extension cords. I probably won't be able to do that with the WD1450. I forgot to pick up a fine filter bag when I was at Home Depot today, but I did see them in stock there. I'll pick one up tomorrow. Naturally, the extra bag I had for my Shop Vac doesn't fit the WD1450 properly, which will probably translate into more expensive bags that are harder to find. We'll see... I am a little disappointed that I had to go to a 14 gallon vac, to get the same features I had on my old 12 gallon vac. I would have preferred something smaller and more portable than my old vac. I'm not sure the WD1450 will even fit in my trunk anymore, and my wife isn't going to be happy about dragging it out to vacuum the cars. But, if I can get a dust collector in the near future, my shop vac needs may be less important and I may be able to downsize. We'll see... I was ready to spring for the dust collector and make an hour drive one way to go get it, but they didn't have any in stock. Guess it's best I didn't make an impulse buy anyway. So, I lost a day I could have been working on the cabinets, but I should be back up and running tomorrow. Thanks for everyones input! Anthony |
#20
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
In article ,
HerHusband wrote: My Shop Vac died on me in the middle of sanding some cabinets tonight Based on the many positive reviews I've read, I bought a Ridgid WD1450 shop vac this afternoon for $99 (+tax). I haven't had the opportunity to really work it yet, but I did get everything assembled and fired it up for a few tests. Noise Level - Not bad. It's quieter than my "quiet" Shop Vac, though in all fairness that has been sounding a lot louder and unhealthy the past few weeks. I remember being impressed when I bought my old Shop Vac too. I'm sure the WD1450 isn't as quiet as the Fein or Festool machines, but it's only one third the price and it was in stock just a few miles from home. It's certainly quiet enough to use by itself, and I wear ear muffs when using it with other tools like a sander anyway. Ridgid also makes an inexpensive 'muffler' the plugs on the air exhaust fitting. It makes things a little quieter -- not so much the absolute sound level but knocks off some of the higher frequencies. It is a 'noticeable', albeit *not* 'radical' difference. If you want seriously quiet _on_a_budget_, AND are willing to compromise down to household-size hose, look for a used 'Filter Queen'. they catch _everything_ out of the air, are damn-near indestructible -- stainless construction, and *amazingly* quiet. No provision for wet pick-up capability, though. Unlike virtually any other 'home' vacuum, you _don't_ risk damaging it if it picks up something solid -- hardware, wood scraps, whatever. They've also got a built-in 'cyclone', so suction doesn't degrade much as it pulls in dust. Filter Queens are _grossly_ over-priced on the new market, but can be had reasonably on the used one. |
#21
Posted to rec.woodworking
|
|||
|
|||
Quietest Shop Vac? Need in a hurry!
On Nov 18, 7:44 pm, HerHusband wrote:
I need a QUIET vac! Try adding a silencer http://www.me.mtu.edu/courses/meem47...uum_report.pdf |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
New Business - Hurry !!!.... | UK diy | |||
quietest bathroom fan? | UK diy | |||
who makes the quietest air compressors? | Home Repair | |||
what brand ceiling fan is the quietest? | Home Repair | |||
Quietest ballcock? | UK diy |