Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Issue with keeping the fence stable on my JT360
Hello,
I have a Delta JT360 jointer. Lately the fence will not stay stable for me. It moves (wiggles) in and out across the bed of the jointer. It doesn't move from 90, but the other way. I have tightened the two wing plate but they just seem to move with a little pressure. It worked better in the past. Not sure what may have changed. Thanks Larry C |
#2
Posted to rec.woodworking
|
|||
|
|||
Issue with keeping the fence stable on my JT360
On Oct 30, 11:40 am, "Larry C" wrote:
Hello, I have a Delta JT360 jointer. Lately the fence will not stay stable for me. It moves (wiggles) in and out across the bed of the jointer. It doesn't move from 90, but the other way. I have tightened the two wing plate but they just seem to move with a little pressure. It worked better in the past. Not sure what may have changed. Thanks Larry C If it really stays at 90 degrees, maybe just pivot it to one extreme and put a clamp behind it to hold 'er. It'll work, until you can figure out why things have loosened/worn out. Check your owners manual? Tom |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
delta JT360 assembly problem - web site useless | Woodworking | |||
most stable circular saw rip fence | Home Repair | |||
Installing wood fence and keeping existing chain link | Home Repair | |||
LV 22" jointer plane fence issue has been resolved | Woodworking | |||
fence issue | Home Repair |