Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Is this finish combo ok?
Hi Everyone,
On my plight to color match a new fish tank stand to a purchased dining room set I came up with this finish. Anyone see anything wrong with it? It's on pine. * Wipe entire unit down with mineral spirits after sanding with 120 and then 180. * One coat of minwax oil based red mahogany stain laid on and not wiped off. Sanded lightly with 320 when dry to remove any sheen. * Four coats of minwax polyshade bombay mahogany satin sanded lightly with 320 grit between coats. * Four coats of minwax poly-cyrlic satin sanded lightly with 320 between coats. Thanks, Sam |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Textured finish for sub-bass cabinet | UK diy | |||
Surface finish | Metalworking | |||
satin finish on Stainless steel radiator... | UK diy | |||
Please accept my apologies...Forgive me finish gods! | Woodworking |