Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
1/2" bead molding
I need to make a couple of feet. What size roundover bit and height do I
need?? Thanks, Oscar |
#2
Posted to rec.woodworking
|
|||
|
|||
1/2" bead molding
"Oscar Garcia" wrote in message ... I need to make a couple of feet. What size roundover bit and height do I need?? Thanks, Oscar 1/4" radius and pass the 1/2" thick material through 2 times once each on the top and bottom. Use a fence to guide or the second pass will over cut if using a round over with a pilot. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Orange Peel Texture? "Knockdown" or "Skip Trowel" also "California Knock-down" | Home Repair | |||
Where to buy a set of 5/8" cove molding knives | Woodworking | |||
uPVC glazing bead | UK diy | |||
how do i groove parting bead | Woodworking |