New DP...
 

Dear All,

I picked up my new Delta 17-925 drill press on Monday and I must say it is
quite a machine. I got tired of running up against the 3" stroke of my
little 12" drill press so I bought one with a 6" stroke. It also has VS
which is nice, goes from 150 rpm to 3200 RPM.

I have played with it, using some big ass bits that would always stall the
1/3 HP of the 12" unit, that the 3/4 HP on the new unit spin no problem.

http://members.rogers.com/dfeisan/images/dps.jpg

I like my new drill press.

Thanks,

David.

Every neighbourhood has one, in mine, I'm him.

Remove the "splinter" from my email address to email me.

Newbies, please read this newsgroups FAQ.

rec.ww FAQ http://www.robson.org/woodfaq/
Archives http://groups.google.com/advanced_group_search
Crowbar FAQ http://www.klownhammer.org/crowbar

New DP...
 

So uh Dave,,, knowing how you like to go with the theme, "bigger is better",
did you have to cut a hole in the roof of your garage to get the DP in? :~)


"David F. Eisan" wrote in message
able.rogers.com...
Dear All,

I picked up my new Delta 17-925 drill press on Monday and I must say it is
quite a machine. I got tired of running up against the 3" stroke of my
little 12" drill press so I bought one with a 6" stroke. It also has VS
which is nice, goes from 150 rpm to 3200 RPM.

I have played with it, using some big ass bits that would always stall the
1/3 HP of the 12" unit, that the 3/4 HP on the new unit spin no problem.

http://members.rogers.com/dfeisan/images/dps.jpg

I like my new drill press.

Thanks,

David.

Every neighbourhood has one, in mine, I'm him.

Remove the "splinter" from my email address to email me.

Newbies, please read this newsgroups FAQ.

rec.ww FAQ http://www.robson.org/woodfaq/
Archives http://groups.google.com/advanced_group_search
Crowbar FAQ http://www.klownhammer.org/crowbar

New DP...
 

I picked up my new Delta 17-925 drill press on Monday and I must say it is
quite a machine. I got tired of running up against the 3" stroke of my
little 12" drill press so I bought one with a 6" stroke. It also has VS
which is nice, goes from 150 rpm to 3200 RPM.

I have played with it, using some big ass bits that would always stall the
1/3 HP of the 12" unit, that the 3/4 HP on the new unit spin no problem.

http://members.rogers.com/dfeisan/images/dps.jpg

I like my new drill press.

Geez. Control yourself, will you? You've got drool all over the camera lens.

New DP...
 

On Thu, 21 Aug 2003 02:38:25 GMT, "David F. Eisan"
wrote:

I picked up my new Delta 17-925 drill press on Monday...

http://members.rogers.com/dfeisan/images/dps.jpg

I like my new drill press.

Looks just like mine. Great, isn't it? I discovered a new dimension in
heavy hardware getting that thing up in the air.


LRod

Master Woodbutcher and seasoned termite

Shamelessly whoring my website since 1999

http://www.woodbutcher.net

New DP...
 

On 22 Aug 2003 15:43:09 -0700, (Bigpole) wrote:

WOW David, you went from a bench top to that. That's like going from a
Yugo to a cadillac.
Could you have laid the drill press on it's side, put the head on and
then set it upright?

That's what I did with mine. It still took my beefy neighbor's help to
do it.


LRod

Master Woodbutcher and seasoned termite

Shamelessly whoring my website since 1999

http://www.woodbutcher.net

New DP...
 

WOW David, you went from a bench top to that. That's like going from a
Yugo to a cadillac.
Could you have laid the drill press on it's side, put the head on and
then set it upright?

Ted

"David F. Eisan" wrote in message ble.rogers.com...
Dear Leon,

So uh Dave,,, knowing how you like to go with the theme, "bigger is
better",
did you have to cut a hole in the roof of your garage to get the DP in?
:~)

The biggest problem was lifting the head on. I am 6' and my friend who
helped me about 5'5", the two of us had to stand on ladders to lift the head
up there, and it weighs over 150# just by itself.

I must finish off my new bandsaw, 17" of resaw with a 3hp motor, now that is
a bandsaw...

Thanks,

David.

Every neighbourhood has one, in mine, I'm him.

Remove the "splinter" from my email address to email me.

Newbies, please read this newsgroups FAQ.

rec.ww FAQ http://www.robson.org/woodfaq/
Archives http://groups.google.com/advanced_group_search
Crowbar FAQ http://www.klownhammer.org/crowbar

New DP...
 

Everning Guys,

Could you have laid the drill press on it's side, put the head on and
then set it upright?

That's what I did with mine. It still took my beefy neighbor's help to
do it.

Arrg!

Where the hell were you two smart guys last night when I was trying to lift
half a drill press head that weighs more than me up a ladder!

I cannot believe I didn't think of the oh so obvious solution, DOH!

I will keep it in mind for next time.

:).

Thanks,

David.

Every neighbourhood has one, in mine, I'm him.

Remove the "splinter" from my email address to email me.

Newbies, please read this newsgroups FAQ.

rec.ww FAQ http://www.robson.org/woodfaq/
Archives http://groups.google.com/advanced_group_search
Crowbar FAQ http://www.klownhammer.org/crowbar