I have an old solid 5 panel door which measures 33 ¾” wide 6’9” high and
1 ¼” thick. On the latch side above the latch it begins to separate
“Twist” away from the stop strip till it reachs the top where there is
an 11/16” gap. Is there any way to straighten the twist out of this
door? Thanks!

In article , says...
I have an old solid 5 panel door which measures 33 ¾” wide 6’9” high and
1 ¼” thick. On the latch side above the latch it begins to separate
“Twist” away from the stop strip till it reachs the top where there is
an 11/16” gap. Is there any way to straighten the twist out of this
door? Thanks!


Not really. . .But you can use a fitted stop molding.

Kim