Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Drum Sander Chatter
I just bought a Performax 16-32 drum sander. I tried sanding a piece about
20 inches wide, so I had to overlap. It seemed to be working OK, but when I got down to the last grit (80,120,150) I noticed some 'chatter' and some overlap which hadn't appeared on the coarser grits. Any ideas where the novice went wrong? |
#2
Posted to rec.woodworking
|
|||
|
|||
Drum Sander Chatter
"Jeff Raymond" wrote in message ... I just bought a Performax 16-32 drum sander. I tried sanding a piece about 20 inches wide, so I had to overlap. It seemed to be working OK, but when I got down to the last grit (80,120,150) I noticed some 'chatter' and some overlap which hadn't appeared on the coarser grits. Any ideas where the novice went wrong? Just a guess, You may be sanding too fast ot trying to sand too deeply for the fine grit paper. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sanding floorboards - Drum Sander and or Edge Sander | UK diy | |||
Sanding floorboards - Drum Sander and or Edge Sander | UK diy | |||
Making a drum sander, problem truing the drum | Woodworking | |||
Shop Built Wide belt sander vs Shop Built Drum sander....Whats easyer to make. Im no engineer. | Woodworking | |||
Drum Sander | UK diy |