magnetic nail holder
 

was watch one of the how-to-show's the other day and saw a round tube
nail holder with a red rubber handle, can't remember if it was ask this
old house or Ron Hazelton show, but I can't find them anywhere has
anyone seen them anywhere? had a small u cut in end with a magnetic in
the tube.

magnetic nail holder
 

Was it something like this?
http://www.houseoftools.com/product.htm?pid=478154
"racing John" wrote in message
...
was watch one of the how-to-show's the other day and saw a round tube
nail holder with a red rubber handle, can't remember if it was ask this
old house or Ron Hazelton show, but I can't find them anywhere has
anyone seen them anywhere? had a small u cut in end with a magnetic in
the tube.

magnetic nail holder
 

Sun, Jan 28, 2007, 11:07am (EST-1) (Doug*Brown)
doth queryeth:
Was it something like this?
http://www.houseoftools.com/product.htm?pid=478154

Hah, that's kinda slick. Be easy enough to make one too. Stick a
small magnet in a tube, crimp the tube, or use gule, knotch the end of
te tube. Viola, nail holder. Of course, then you'd have one more
little gadget invented to solve a non problem to keep track of whenever
you want to use it. OR, you could just cut a little slit in the end of
a piece of scrap wood, just large enough to hold your nail, for free;
and, you won't need to worry about misplacingt it. A piece of tape,
looped, with the sticky out, works too. Me, I'd probably just hold the
nail with my fingers, and just tap to get it started, not hard enough to
hurt if I missed - I can usually find my fingers when I need 'em.



JOAT
Bugrit. Millennium hand AND shrimp.

magnetic nail holder
 

"J T" wrote in message
looped, with the sticky out, works too. Me, I'd probably just hold the
nail with my fingers, and just tap to get it started, not hard enough to
hurt if I missed - I can usually find my fingers when I need 'em.

It could be a really useful tool for people with slightly unsteady hand
motion when swinging the hammer. I taught leathercraft at a local hospital
and experienced quite a few hits on the hand with the hammer when working
with quadriplegics. Fortunately, most of them didn't have sufficient arm
power to build up a really heavy swing of the wooden hammer.

magnetic nail holder
 

Looks like a neat idea. Where I have the most trouble is with small
brads. (Yes I do sometimes still drive them by hand) I can't hold
them between my thumb & finger with enough left above to avoid hitting
thumb with hammer. I've often used a needlenose pliers to hold them
while starting but this gizmo looks like a better idea. Think I'll
make my own rather than purchase, though.
--
Better to be stuck up in a tree than tied to one.

Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf.lonestar.org

magnetic nail holder
 

"Larry" wrote in message
...
Looks like a neat idea. Where I have the most trouble is with small
brads. (Yes I do sometimes still drive them by hand) I can't hold
them between my thumb & finger with enough left above to avoid hitting
thumb with hammer. I've often used a needlenose pliers to hold them
while starting but this gizmo looks like a better idea. Think I'll
make my own rather than purchase, though.
--
Better to be stuck up in a tree than tied to one.

Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf.lonestar.org

This sounds like a job for:
http://www.bostonindustrial.com/35mataha.html
Kerry

magnetic nail holder
 

On Mon, 29 Jan 2007 08:21:33 -0500, "Upscale" wrote:


"J T" wrote in message
looped, with the sticky out, works too. Me, I'd probably just hold the
nail with my fingers, and just tap to get it started, not hard enough to
hurt if I missed - I can usually find my fingers when I need 'em.

It could be a really useful tool for people with slightly unsteady hand
motion when swinging the hammer. I taught leathercraft at a local hospital
and experienced quite a few hits on the hand with the hammer when working
with quadriplegics. Fortunately, most of them didn't have sufficient arm
power to build up a really heavy swing of the wooden hammer.

Vacuum works best IMO. Small tube with a similar to the one with the magnet but with
elongated slit (flatten the tube slightly for a elongated hole and more suck) inside
surgical hose attached to a vacuum device.
Much better than a magnet because it will only pick up one nail at a time.
I invented and used such a device back when I was making doll furniture years ago.
I could just stick it in the box of nails and suck up a single nail.
I had a couple different tubes for different brads. Worked great for furniture tacks
as well.

magnetic nail holder
 

On Mon, 29 Jan 2007 10:42:13 -0800, pe wrote:

On Mon, 29 Jan 2007 08:21:33 -0500, "Upscale" wrote:


"J T" wrote in message
looped, with the sticky out, works too. Me, I'd probably just hold the
nail with my fingers, and just tap to get it started, not hard enough to
hurt if I missed - I can usually find my fingers when I need 'em.

It could be a really useful tool for people with slightly unsteady hand
motion when swinging the hammer. I taught leathercraft at a local hospital
and experienced quite a few hits on the hand with the hammer when working
with quadriplegics. Fortunately, most of them didn't have sufficient arm
power to build up a really heavy swing of the wooden hammer.

Vacuum works best IMO. Small tube with a similar to the one with the magnet but with
elongated slit (flatten the tube slightly for a elongated hole and more suck) inside
surgical hose attached to a vacuum device.
Much better than a magnet because it will only pick up one nail at a time.
I invented and used such a device back when I was making doll furniture years ago.
I could just stick it in the box of nails and suck up a single nail.
I had a couple different tubes for different brads. Worked great for furniture tacks
as well.

Why it worked so well with furniture tacks is because the slot in the tube would not
allow it enough vacuum to pick up the tack by anything but the shaft and magnets
don't work so good with brass tacks. g
Try it.

magnetic nail holder
 

Mon, Jan 29, 2007, 8:21am (Upscale) doth sayeth:
It could be a really useful tool for people with slightly unsteady hand
motion when swinging the hammer. I taught leathercraft at a local
hospital and experienced quite a few hits on the hand with the hammer
when working with quadriplegics. Fortunately, most of them didn't have
sufficient arm power to build up a really heavy swing of the wooden
hammer.

Yup, you're absolutely right. I'm so used to doing stuff for
myself, somehing like that never even occurred to me. I dislike wooden
hammers tho, I like turned mallets, easier (and faster) to make, and I
think easier to use.



JOAT
Bugrit. Millennium hand AND shrimp.

magnetic nail holder
 

Two things work well for small brads. A Warrington hammer is designed for
those situations. Also, a brad pusher works well.

"Larry" wrote in message
...
Looks like a neat idea. Where I have the most trouble is with small
brads. (Yes I do sometimes still drive them by hand) I can't hold
them between my thumb & finger with enough left above to avoid hitting
thumb with hammer. I've often used a needlenose pliers to hold them
while starting but this gizmo looks like a better idea. Think I'll
make my own rather than purchase, though.
--
Better to be stuck up in a tree than tied to one.

Larry Wasserman - Baltimore Maryland - lwasserm(a)sdf.lonestar.org

magnetic nail holder
 

wrote in message
...

Vacuum works best IMO. Small tube with a similar to the one with the
magnet but with
elongated slit (flatten the tube slightly for a elongated hole and more
suck) inside
surgical hose attached to a vacuum device.
Much better than a magnet because it will only pick up one nail at a time.
I invented and used such a device back when I was making doll furniture
years ago.
I could just stick it in the box of nails and suck up a single nail.
I had a couple different tubes for different brads. Worked great for
furniture tacks
as well.

I've filed your good idea. Thanks.

-- Mark

magnetic nail holder
 

On Tue, 30 Jan 2007 04:45:10 GMT, "Mark Jerde" wrote:

wrote in message
.. .

Vacuum works best IMO. Small tube with a similar to the one with the
magnet but with
elongated slit (flatten the tube slightly for a elongated hole and more
suck) inside
surgical hose attached to a vacuum device.
Much better than a magnet because it will only pick up one nail at a time.
I invented and used such a device back when I was making doll furniture
years ago.
I could just stick it in the box of nails and suck up a single nail.
I had a couple different tubes for different brads. Worked great for
furniture tacks
as well.

I've filed your good idea. Thanks.

It worked very well for me. The trick is careful shaping of the tube end so the nails
slip into the slot easily. I made them out of both copper and aluminum.
If you're using brass escutcheon pins (those 1/2 little buggers are a bitch to
handle) vacuum is the ONLY way to work :)

I used a vacuum device that I bought from a friend in the TV repair business. I can't
recall what it was called but it was powerful and reasonably quiet and resided on the
floor with a foot switch.
I'm sure one of the many mini vacs sold for computers would work but I have no need
for one. All my brad nailing is done with air nailers now and I don't use the
decorative furniture tacks any more.